Data Sheet

1) For details on the capacitance C
test
as well as on the parameters k and n refer to "Application notes", chapters 1.6 and 1.7.
Applications
Switch-mode power supplies
Soft-start motors, e.g. in vacuum cleaners
Features
Useable in series connections
up to 265 V
RMS
Coated thermistor disk
Kinked leads of tinned copper wire
Wide resistance range
UL approval (E69802)
Options
Resistance tolerance <20% and alternative
lead configurations available on request
Delivery mode
Bulk (standard),
cardboard tape, reeled or in Ammo pack
Dimensional drawing
Dimensions in mm
Approx. weight 4 g
General technical data
Climatic category (IEC 60068-1) 55/170/21
Max. power (at 25 °C) P
max
5.1 W
Resistance tolerance ∆R
R
/R
R
±20 %
Rated temperature T
R
25 °C
Dissipation factor (in air) δ
th
approx. 24 mW/K
Thermal cooling time constant (in air) τ
c
approx. 100 s
Heat capacity C
th
approx. 2400 mJ/K
Electrical specification and ordering codes
R
25
Ω
I
max
(0...65 °C)
A
B
25/100
K
C
test
1)
230 V
µF
C
test
1)
110 V
µF
Param.
for R(I)
1)
k
Param.
for R(I)
1)
n
Ordering code
1 16.0 2800 1000 4000 0.766 1.30 B57364S0109M000
2 12.0 2900 1000 4000 0.966 1.32 B57364S0209M000
2.5 11.0 2900 1000 4000 1.04 1.32 B57364S0259M000
4 9.5 3060 1000 4000 1.20 1.34 B57364S0409M000
5 8.5 3060 1000 4000 1.29 1.34 B57364S0509M000
10 7.5 3300 1000 4000 1.55 1.37 B57364S0100M000
Inrush current limiters B57364
ICLs S364
Page 2 of 15Please read Cautions and warnings and
Important notes at the end of this document.