SIOV metal oxide varistors Leaded varistors, StandarD series Series/Type: B722* Date: December 2011 © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.
Leaded varistors B722* StandarD series Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Features Wide operating voltage range 11 … 1100 VRMS High surge current ratings up to 8 kA No derating up to 85 °C ambient temperature PSpice models Approvals UL CSA (all types ≥ K115) VDE CQC S05/07 (K11 … K460), S10/S14 (K11 … K680), S20 (K11 … K1000) IEC Delivery mode Bulk (standard), taped versions on reel or in Ammo pack upon request.
Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 °C) Ordering code VRMS = 11 V B72205S0110K101 B72207S0110K101 B72210S0110K101 B72214S0110K101 B72220S0110K101 VRMS = 14 V B72205S0140K101 B72207S0140K101 B72210S0140K101 B72214S0140K101 B72220S0140K101 VRMS = 17 V B72205S0170K101 B72207S0170K101 B72210S0170K101 B72214S0170K101 B72220S0170K101 VRMS = 20 V B72205S0200K101 B72207S0200K101 B72210S0200K101 B72214S0200K101 B72220S0200K101 VRMS = 25 V B
Leaded varistors B722* StandarD series Characteristics (TA = 25 °C) Ordering code VRMS = 11 V B72205S0110K101 B72207S0110K101 B72210S0110K101 B72214S0110K101 B72220S0110K101 VRMS = 14 V B72205S0140K101 B72207S0140K101 B72210S0140K101 B72214S0140K101 B72220S0140K101 VRMS = 17 V B72205S0170K101 B72207S0170K101 B72210S0170K101 B72214S0170K101 B72220S0170K101 VRMS = 20 V B72205S0200K101 B72207S0200K101 B72210S0200K101 B72214S0200K101 B72220S0200K101 VRMS = 25 V B72205S0250K101 B72207S0250K101 B72210S0250K101
Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 °C) Ordering code VRMS = 35 V B72205S0350K101 B72207S0350K101 B72210S0350K101 B72214S0350K101 B72220S0350K101 VRMS = 40 V B72205S0400K101 B72207S0400K101 B72210S0400K101 B72214S0400K101 B72220S0400K101 VRMS = 50 V B72205S0500K101 B72207S0500K101 B72210S0500K101 B72214S0500K101 B72220S0500K101 VRMS = 60 V B72205S0600K101 B72207S0600K101 B72210S0600K101 B72214S0600K101 B72220S0600K101 VRMS = 75 V B
Leaded varistors B722* StandarD series Characteristics (TA = 25 °C) Ordering code VRMS = 35 V B72205S0350K101 B72207S0350K101 B72210S0350K101 B72214S0350K101 B72220S0350K101 VRMS = 40 V B72205S0400K101 B72207S0400K101 B72210S0400K101 B72214S0400K101 B72220S0400K101 VRMS = 50 V B72205S0500K101 B72207S0500K101 B72210S0500K101 B72214S0500K101 B72220S0500K101 VRMS = 60 V B72205S0600K101 B72207S0600K101 B72210S0600K101 B72214S0600K101 B72220S0600K101 VRMS = 75 V B72205S0750K101 B72207S0750K101 B72210S0750K101
Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 °C) Ordering code VRMS = 115 V B72205S0111K101 B72207S0111K101 B72210S0111K101 B72214S0111K101 B72220S0111K101 VRMS = 130 V B72205S0131K101 B72207S0131K101 B72210S0131K101 B72214S0131K101 B72220S0131K101 VRMS = 140 V B72205S0141K101 B72207S0141K101 B72210S0141K101 B72214S0141K101 B72220S0141K101 VRMS = 150 V B72205S0151K101 B72207S0151K101 B72210S0151K101 B72214S0151K101 B72220S0151K101 VRMS = 17
Leaded varistors B722* StandarD series Characteristics (TA = 25 °C) Ordering code VRMS = 115 V B72205S0111K101 B72207S0111K101 B72210S0111K101 B72214S0111K101 B72220S0111K101 VRMS = 130 V B72205S0131K101 B72207S0131K101 B72210S0131K101 B72214S0131K101 B72220S0131K101 VRMS = 140 V B72205S0141K101 B72207S0141K101 B72210S0141K101 B72214S0141K101 B72220S0141K101 VRMS = 150 V B72205S0151K101 B72207S0151K101 B72210S0151K101 B72214S0151K101 B72220S0151K101 VRMS = 175 V B72205S0171K101 B72207S0171K101 B72210S017
Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 °C) Ordering code VRMS = 250 V B72205S0251K101 B72207S0251K101 B72210S0251K101 B72214S0251K101 B72220S0251K101 VRMS = 275 V B72205S0271K101 B72207S0271K101 B72210S0271K101 B72214S0271K101 B72220S0271K101 VRMS = 300 V B72205S0301K101 B72207S0301K101 B72210S0301K101 B72214S0301K101 B72220S0301K101 VRMS = 320 V B72205S0321K101 B72207S0321K101 B72210S0321K101 B72214S0321K101 B72220S0321K101 VRMS = 38
Leaded varistors B722* StandarD series Characteristics (TA = 25 °C) Ordering code VRMS = 250 V B72205S0251K101 B72207S0251K101 B72210S0251K101 B72214S0251K101 B72220S0251K101 VRMS = 275 V B72205S0271K101 B72207S0271K101 B72210S0271K101 B72214S0271K101 B72220S0271K101 VRMS = 300 V B72205S0301K101 B72207S0301K101 B72210S0301K101 B72214S0301K101 B72220S0301K101 VRMS = 320 V B72205S0321K101 B72207S0321K101 B72210S0321K101 B72214S0321K101 B72220S0321K101 VRMS = 385 V B72205S0381K101 B72207S0381K101 B72210S038
Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 °C) Ordering code VRMS = 440 V B72205S0441K101 B72207S0441K101 B72210S0441K101 B72214S0441K101 B72220S0441K101 VRMS = 460 V B72205S0461K101 B72207S0461K101 B72210S0461K101 B72214S0461K101 B72220S0461K101 VRMS = 510 V B72210S0511K101 B72214S0511K101 B72220S0511K101 VRMS = 550 V B72210S0551K101 B72214S0551K101 B72220S0551K101 VRMS = 625 V B72210S0621K101 B72214S0621K101 B72220S0621K101 VRMS = 680 V
Leaded varistors B722* StandarD series Characteristics (TA = 25 °C) Ordering code VRMS = 440 V B72205S0441K101 B72207S0441K101 B72210S0441K101 B72214S0441K101 B72220S0441K101 VRMS = 460 V B72205S0461K101 B72207S0461K101 B72210S0461K101 B72214S0461K101 B72220S0461K101 VRMS = 510 V B72210S0511K101 B72214S0511K101 B72220S0511K101 VRMS = 550 V B72210S0551K101 B72214S0551K101 B72220S0551K101 VRMS = 625 V B72210S0621K101 B72214S0621K101 B72220S0621K101 VRMS = 680 V B72210S0681K101 B72214S0681K101 B72220S0681K1
Leaded varistors B722* StandarD series Dimensional drawings Weight Nominal diameter mm 5 7 10 14 20 VRMS V 11 ... 460 11 ... 460 11 ... 680 11 ... 1000 11 ... 1000 Weight g 0.3 ... 0.7 0.4 ... 1.1 1.0 ... 3.0 1.4 ... 7.6 2.7 ... 15.7 The weight of varistors in between these voltage classes can be interpolated.
Leaded varistors B722* StandarD series Ordering code VRMS = 25 V B72205S0250K101 B72207S0250K101 B72210S0250K101 B72214S0250K101 B72220S0250K101 VRMS = 30 V B72205S0300K101 B72207S0300K101 B72210S0300K101 B72214S0300K101 B72220S0300K101 VRMS = 35 V B72205S0350K101 B72207S0350K101 B72210S0350K101 B72214S0350K101 B72220S0350K101 VRMS = 40 V B72205S0400K101 B72207S0400K101 B72210S0400K101 B72214S0400K101 B72220S0400K101 VRMS = 50 V B72205S0500K101 B72207S0500K101 B72210S0500K101 B72214S0500K101 B72220S0500K
Leaded varistors B722* StandarD series Ordering code VRMS = 95 V B72205S0950K101 B72207S0950K101 B72210S0950K101 B72214S0950K101 B72220S0950K101 VRMS = 115 V B72205S0111K101 B72207S0111K101 B72210S0111K101 B72214S0111K101 B72220S0111K101 VRMS = 130 V B72205S0131K101 B72207S0131K101 B72210S0131K101 B72214S0131K101 B72220S0131K101 VRMS = 140 V B72205S0141K101 B72207S0141K101 B72210S0141K101 B72214S0141K101 B72220S0141K101 VRMS = 150 V B72205S0151K101 B72207S0151K101 B72210S0151K101 B72214S0151K101 B72220S0
Leaded varistors B722* StandarD series Ordering code VRMS = 250 V B72205S0251K101 B72207S0251K101 B72210S0251K101 B72214S0251K101 B72220S0251K101 VRMS = 275 V B72205S0271K101 B72207S0271K101 B72210S0271K101 B72214S0271K101 B72220S0271K101 VRMS = 300 V B72205S0301K101 B72207S0301K101 B72210S0301K101 B72214S0301K101 B72220S0301K101 VRMS = 320 V B72205S0321K101 B72207S0321K101 B72210S0321K101 B72214S0321K101 B72220S0321K101 VRMS = 385 V B72205S0381K101 B72207S0381K101 B72210S0381K101 B72214S0381K101 B72220S
Leaded varistors B722* StandarD series Ordering code VRMS = 440 V B72214S0441K101 B72220S0441K101 VRMS = 460 V B72205S0461K101 B72207S0461K101 B72210S0461K101 B72214S0461K101 B72220S0461K101 VRMS = 510 V B72210S0511K101 B72214S0511K101 B72220S0511K101 VRMS = 550 V B72210S0551K101 B72214S0551K101 B72220S0551K101 VRMS = 625 V B72210S0621K101 B72214S0621K101 B72220S0621K101 VRMS = 680 V B72210S0681K101 B72214S0681K101 B72220S0681K101 VRMS = 1100 V B72214S0102K101 B72220S0102K101 [e] ±1 mm a ±1 mm wmax mm
Leaded varistors B722* StandarD series Reliability data Test Test methods/conditions Requirement Varistor voltage The voltage between two terminals with To meet the specified value the specified measuring current applied is called VV (1 mADC @ 0.2 ... 2 s). Clamping voltage The maximum voltage between two terminals with the specified standard impulse current (8/20 µs) applied.
Leaded varistors B722* StandarD series Test Test methods/conditions Requirement Climatic sequence The specimen shall be subjected to: a) dry heat at UCT, 16 h, IEC 60068-2-2, test Ba b) damp heat, 1st cycle: 55 °C, 93% r. H., 24 h, IEC 60068-2-30, test Db c) cold, LCT, 2 h, IEC 60068-2-1, test Aa d) damp heat, additional 5 cycles: 55 °C/25 °C, 93% r. H., 24 h/cycle, IEC 60068-2-30, test Db.
Leaded varistors B722* StandarD series Test Test methods/conditions Solderability IEC 60068-2-20, test Ta, Resistance to soldering heat IEC 60068-2-20, test Tb, method 1A, 260 °C, 10 s: Requirement The inspection shall be carried out under adequate method 1 with modified conditions for light with normal eyesight or lead-free solder alloys: 245 °C, 3 s: with the assistance of a After dipping the terminals to a depth of magnifier capable of giving approximately 3 mm from the body in a a magnificatio
Leaded varistors B722* StandarD series Test Test methods/conditions Requirement Vibration IEC 60068-2-6, test Fc, method B4 Frequency range: 10 … 55 Hz Amplitude: 0.75 mm or 98 m/s2 Duration: 6 h (3 · 2 h) Pulse: sine wave After repeatedly applying a single harmonic vibration according to the table above. The change of VV shall be measured and the specimen shall be visually examined. |∆V/V (1 mA)| ≤5% IEC 60068-2-29, test Eb Pulse duration: 6 ms Max.
Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S05 ... Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S07 ... Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S10 ... Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S14 ... Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S20 ... Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S05K11 ... K40 SIOV-S05K50 ... K460 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S07K11 ... K40 SIOV-S07K50 ... K460 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S10K11 ... K40 SIOV-S10K50 ... K320 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S10K385 ... K680 SIOV-S14K11 ... K40 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S14K50 ... K320 SIOV-S14K385 ... K1000 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S20K11 ... K40 SIOV-S20K50 ... K115 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S20K130 ... K320 SIOV-S20K385 ... K460 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S20K510 ... K1000 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Taping, packaging and lead configuration 1 EPCOS ordering code system For leaded varistors B722 10 S 2 271 K Monolithic varistor Nominal disc diameter Design: S = Leaded varistor T = ThermoFuse F = Fail-safe varistor Q = EnergetiQ Series: 0 = StandarD 1 = Automotive 2 = AdvanceD 3 = SuperioR 4 = SuperioR Max.
Leaded varistors B722* StandarD series 2 Taping and packaging of leaded varistors Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings = 7.5 and 10 the taping mode is based on this standard. 2.1 Taping in accordance with IEC 60286-2 for lead spacing 5.0 mm 2.2 Taping based on IEC 60286-2 for lead spacing 7.5 and 10 mm Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series 2.3 Tape dimensions (in mm) Symbol w = 5.0 Tolerance th = 7.5 Tolerance = 10.0 Tolerance max. max. max. max. max. max. d P0 0.6 12.7 ±0.05 ±0.3 0.8 12.71) P1 F ∆h ∆p 3.85 5.0 0 0 ±0.7 +0.6/ 0.1 ±2.0 ±1.3 8.95 ±0.8 7.5 ±0.8 depends on s 0 ±2.0 W W0 18.0 5.5 ±0.5 min. 18.0 11.0 ±0.5 min. 18.0 11.0 ±0.5 min. W1 W2 H H0 9.0 3.0 18.0 16.0 (18.0) 32.2 4.0 0.9 11.0 4.0 ±0.5 max. +2.0/ 0 ±0.5 9.0 3.0 18.0 16.0 (18.0) 45.0 4.0 0.9 11.0 +0.
Leaded varistors B722* StandarD series 2.4 Taping mode Example: B72210S0271K1 5 1 | Digit 14 Digit 14 Taping Reel type mode Seating plane height H0 for crimped types mm 0 Bulk 1 G I 16 2 G2 I 18 3 G3 II 16 4 G4 II 18 5 G5 III 16 6 GA Ammo pack 16 7 G2A Ammo pack 18 Internal coding for special taping G6 III 18 G10 II 16 G11 II 18 G10A Ammo pack 16 G11A Ammo pack 18 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series 2.5 Reel dimension Dimensions (in mm) Reel type I II III d 360 max. 360 max. 500 max. f 31 ±1 31 ±1 23 ±1 n approx. 45 approx. 55 approx. 59 w 54 max. 64 max. 72 max. If reel type III is not compatible with insertion equipment because of its large diameter, nominal disk diameter 10 mm and 14 mm can be supplied on reel II upon request (taping mode G3). 2.6 Ammo pack dimensions Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series 3 Lead configuration Straight leads are standard for disk varistors. Other lead configurations as crimp style or customer-specific lead wire length according to 3.1, 3.2, 3.3 and 3.4 are optional. Crimped leads (non-standard) are differently crimped for technical reasons; the individual crimp styles are denoted by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings below.
Leaded varistors B722* StandarD series Non-standard, crimp style S4 Non-standard, crimp style S5 Figure 4 Figure 5 3.3 Component height (hmax) for crimped versions (non-standard) Due to technical reasons the component height (hmax) increases if a crimp is added. The maximum height of the crimped component can be found in the table below. Nominal diameter mm 5 5 VRMS V 11 ... 175 210 ... 460 Crimp style S2 S3 5.0 5.0 hmax mm 10.0 10.0 11 ... 175 210 ... 460 S2 S3 5.0 5.0 12.0 12.
Leaded varistors B722* StandarD series 3.4 Trimmed leads (non-standard) Varistors with cut leads available upon request. Lead length tolerances: Straight leads Crimped leads Minimum lead length +/ 1.0 mm +/ 0.8 mm 3.5 mm Figure 6 Please read Cautions and warnings and Important notes at the end of this document.
Leaded varistors B722* StandarD series Cautions and warnings General 1. EPCOS metal oxide varistors are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless otherwise agreed with EPCOS during the design-in-phase. 2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should be evaluated taking into consideration worst-case conditions. 3.
Leaded varistors B722* StandarD series Mounting 1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic that will degrade the component’s electrical characteristics. 2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this reason SIOVs should be physically shielded from adjacent components. Operation 1. Use SIOVs only within the specified temperature operating range. 2.
Leaded varistors B722* StandarD series Symbols and terms Symbol Term C Capacitance Ctyp Typical capacitance i Current ic Current at which Vc, max is measured Ileak Leakage current imax Maximum surge current (also termed peak current) Imax Maximum discharge current to IEC 61643-1 Inom Nominal discharge current to IEC 61643-1 LCT Lower category temperature Ltyp Typical inductance Pmax Maximum average power dissipation Rins Insulation resistance Rmin Minimum resistance TA Ambien
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.
