Inductors RF chokes, LBC series Series/Type: B82144A Date: March 2008 %BUB 4IFFU © EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
RF chokes B82144A LBC series, 5.
RF chokes B82144A LBC series, 5.2 s 12 (mm) 65±1 53±2 65±1 53±2 12 max. (IEC 60294) 9.2 max. (IEC 60294) 3.5min. min. 3.5 11.5 14.8max. max. lacquered lacquered 6±0.5 6±0.5 5±0.25 5±0.25 10±0.25 10±0.25 ø0.8 max. ø0.8 max. ø5.2 max. ø4 max. Dimensional drawing Dimensions in mm Minimum lead spacing 15 mm IND0429-B-E IND0431-4-E n w 30 H 30 ø360 _ 1 ø30.5±0.15 ø82+1 ø90 Packing Label 30 L IND0452-V-E W n (mm): 72 +1 w (mm): 84 max L × W × H (max.
RF chokes B82144A LBC series, 5.
RF chokes B82144A LBC series, 5.2 s 12 (mm) Characteristics and ordering codes Tolerance1) LR Qmin fQ IR Rmax fres,min MHz mA Ω MHz Ordering code (reel packing) 2) 40 7.96 2200 0.08 200 B82144A2102K000 1.5 40 7.96 2100 0.09 190 B82144A2152K000 2.2 40 7.96 1900 0.11 140 B82144A2222K000 3.3 40 7.96 1750 0.13 120 B82144A2332K000 4.7 40 7.96 1600 0.16 100 B82144A2472K000 6.8 40 7.96 1500 0.19 80 B82144A2682K000 10 60 2.52 1400 0.
RF chokes B82144A LBC series, 5.2 s 12 (mm) Characteristics and ordering codes LR Tolerance Qmin μH fQ IR Rmax fres,min MHz mA Ω MHz Ordering code (reel packing) 1) For telecommunications in the blocking filter for 12-kHz and 16-kHz counting pulses 980 ±3% 25 0.016 200 3.8 1.2 B82144A2984A000 1450 25 0.016 140 6.0 1.0 B82144A2145A500 2600 20 0.012 120 11.0 0.7 B82144A2265A000 3050 25 0.016 100 12.0 0.6 B82144A2305A500 5330 20 0.012 90 25.0 0.
RF chokes B82144A LBC series, 5.
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.