Data Sheet

ManualsBrandsTDK ManualsCoils & ChokesTDK B82730U3401A020 Line choke SMD B82730 15 mH 2400 mΩ 0.4 A 1 pc(s)

a~í~=pÜÉÉía~í~=pÜÉÉí

Power line chokes

Current-compensated U core double chokes

300 V AC, 0.4 … 2.6 A, 0.33 … 15 mH, +40° C

Series/Type: B82730U/G

Date: July 2012

information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Summary of content (7 pages)

PAGE 1
Power line chokes Current-compensated U core double chokes 300 V AC, 0.4 … 2.6 A, 0.33 … 15 mH, +40° C Series/Type: B82730U/G Date: July 2012 a~í~=pÜÉÉí © EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company.
PAGE 2
Power line chokes B82730U/G Current-compensated U core double chokes Rated voltage 300 V AC Rated current 0.4 ... 2.6 A Rated inductance 0.33 ... 15 mH Construction ■ ■ ■ ■ ■ Current-compensated U-core double choke Ferrite core Closed PET coil former (UL 94 V-0) Without encapsulation Creepage distances  4 mm B82730U Features ■ High resonance frequency ■ Approx. 1.
PAGE 3
Power line chokes B82730U/G Current-compensated U core double chokes Dimensional drawing and pin configuration Vertical version B82730U 2 4 3 8±0.3 2 4 3 Marking 11 max. _ 0.3 3 +0.5 16.5 max. 16.5 max. 1 7±0.3 1 Tolerances to ISO 2768-C unless otherwise noted ø0.6±0.1 IND0765-V-E Dimensions in mm Horizontal version B82730G Tolerances to ISO 2768-C unless otherwise noted Dimensions in mm Please read Cautions and warnings and Important notes at the end of this document.
PAGE 4
Power line chokes B82730U/G Current-compensated U core double chokes Technical data and measuring conditions Rated voltage VR 300 V AC (50/60 Hz) Test voltage Vtest 2000 V AC, 2 s (line/line) Rated temperature TR +40 C Rated current IR Referred to 50 Hz and rated temperature Rated inductance LR Measured with Agilent 4284A at 0.
PAGE 5
Power line chokes B82730U/G Current-compensated U core double chokes Characteristics and ordering codes IR LR Lstray,typ Rtyp Ordering code Approvals A mH H m Vertical version 0.40 15 200 2400 B82730U3401A020 B82730G3401A020 × × 0.45 10 140 1750 B82730U3451A020 B82730G3451A020 × × Horizontal version 0.60 4.7 70 920 B82730U3601A020 B82730G3601A020 × × 0.75 3.9 55 700 B82730U3751A020 B82730G3751A020 × × 0.95 2.
PAGE 6
Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. Derating must be applied in case the ambient temperature in the application exceeds the rated temperature of the component.
PAGE 7
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.