Data Sheet

4 02/16
Please read Cautions and warnings and
Important notes at the end of this document.
Technical data and measuring conditions
Characteristics and ordering codes
Rated voltage V
R
50 V DC
Max. component temperature +150 °C
Rated current I
R
Referred to 50 Hz and +20 °C
Rated inductance L
R
Measured with Agilent 4284A at 100 kHz, 100 mV, +20 °C
Inductance is specified in common-mode
Inductance tolerance –30/+50% at +20 °C
Stray inductance L
stray,typ
Measured with Agilent 4284A at 100 kHz, 100 mV, +20 °C,
typical values
DC resistance R
max
Measured at +20 qC, specified per winding
Insulation resistance (min)
10 M:,measured at 50 V DC
Rated impedance Z
min
Measured at +20 °C, 10 MHz, 100 mV in common-mode
Rated impedance Z
typ
Measured at +20 °C, 10 MHz, 100 mV in common-mode
Solderability Dip and look method Sn95.5Ag3.8Cu0.7:
+(245 r5) °C, (3 r0.3) s
Wetting of soldering area t90%
(based on IEC 60068-2-58)
Resistance to soldering heat +260 °C, 40 s as referenced in JEDEC J-STD 020D
Climatic category 40/150/56 (to IEC 60068-1)
Storage conditions (packaged) –25 °C … +40 °C, d75% RH
Weight Approx. 0.14 g
L
R
µH
L
stray,typ
µH
I
R
mA
R
max
:
Z
min
:
Z
typ
:
Internal code Ordering code
51 0.15 200 1.0 1000 2800 B82787C0513H002 ACT45B-510-2P-TL003
100 0.20 150 2.0 2000 5800 B82787C0104H002 ACT45B-101-2P-TL003
ACT45BData and signal line chokes
Common-mode chokes, EIA 1812