Data Sheet

Surge arrester B88069X0780S102

2-electrode arrester EC600X

PPD AB PD / PPD AB PM Issue 07 / 2015-01-13

Please read Cautions and warnings and Page 4 of 5

Important notes at the end of this document.

Soldering parameter

Wave soldering

Wave profile features Pb-free assembly

Solder Sn 95.5 / Ag 3.8 / Cu 0.7

Solder bath temperature 263 (±3) °C

Dwell time < 3 s

Soldering profile applied to a single soldering process.

Cautions and warnings

 Do not operate surge arresters in power supply networks, whose maximum operating voltage

exceeds the minimum spark-over voltage of the surge arresters.

 Surge arresters may become hot in the event of longer periods of current stress (burn risk). In the

event of overload the connectors may fail or the component may be destroyed.

 If the contacts of the surge arresters are defective, current load can cause sparks and loud

noises.

 Surge arresters must be handled with care and must not be dropped.

 Do not continue to use damaged surge arresters.

Display of ordering codes for EPCOS products

The ordering code for one and the same EPCOS product can be represented differently in data

sheets, data books, other publications, on the EPCOS website, or in order-related documents such as

shipping notes, order confirmations and product labels. The varying representations of the

ordering codes are due to different processes employed and do not affect the specifications of

the respective products. Detailed information can be found on the Internet under