User's Guide

Note: For best performance, use high-quality coax cable and minimize or
eliminate spliers between the cable jack and the Telephony Gateway.
2. Insert the plug from the power cord into the Power connector on the back of the
Telephony Gateway and insert the power cord into a convenient AC outlet.
Note: Use only the external AC power adapter (if provided) and power cord
included with the equipment.
3. Connect one end of the Ethernet cable to any Ethernet port on the back of the
Telephony Gateway, and the other end to the Ethernet port on a computer, Ethernet
hub, or broadband router.
Note: If you are connecng to a computer, use the Ethernet cable included in the
Telephony Gateway package.
4. Connect one end of the telephone cable to the telephone port on the back of the
Telephony Gateway. Connect the other end to the telephone.
Congure your wireless connecon
The TG6452 ships with wireless LAN security set by default. See the security label on your
product for the factory security sengs.
Note: You must set up your computer and other client devices to work with the
security sengs on the TG6452. Refer to the documentaon for your client device for
instrucons on seng security. On most computer systems, you only need to select
the network name (SSID) device and enter the encrypon key.
If you need to modify the Telephony Gateway's default wireless security sengs, or if
you want to congure any other wireless LAN sengs, refer to the following
instrucons.
Chapter 3: Install and connect your Telephony Gateway
Touchstone TG6452 Telephony Gateway User Guide DRAFT Revision 2.3 23