Owner's manual

20
OPERATION (CONTINUED)
To use the LINE IN Jack: Insert one
end of an audio cable into the
AUX/LINEOUTjackonyourexternal
audio unit and the other end into the
LINE IN jack on the rear of this unit.
1a
To use the RCA IN Jacks: Connect a left
andrightaudiocablefromtheLeft/
Right jacks of your external unit to the
RCAINLeft/Rightjacksontherearof
this unit.
1b
USING AN EXTERNAL UNIT CONNECTED TO THE LINE IN OR RCA JACKS
TurnthisunitonbyrotatingtheVolume/
Power control until a click is heard and
the Power indicator lights to turn the
unit on.
SOURCE EQ
2
PresstheSourcebutton/indicatoru; the
Source menu will appear in the display.
Select AUX1 (if using LINE IN Jacks) or
AUX2 (if using the RCA IN jacks) using
the Select control v, and then press the
OK button w to confirm. Start playback
of the external device.
Adjust the Volume and EQ as described
on page 9.
SOURCE EQ
1 2 3 4 5
O ®p n
1
2
3
3
NOTE:
Refer to the owner’s manual of the external unit for detailed connection instructions.