Datasheet

Email:sales
@g
entech-international.co.uk Website: www.
g
entechinternational.com
Flow Switch In Noryl Materials
Contact Configuration SPST
Contact ratings maximum (resistive load)
Volts DC 100
Volts AC 250
Amps 1.0
Operates with small head Watts 10
of water
Maximum withstand across open contacts
Volts DC 600
Initial contact resistance
Ohms 0.25
Mountable in any orientation
The above contact ratings are for resistive loads, for inductive, capacitive and tungsten
filament lamp loads, refer to the circuit protection notebook
Food grade materials
Noryl material for wetted
Environmental Specifications
parts HOUSING MATERIAL Noryl
SHUTTLE MATERIAL Noryl
Other materials available OPERATING TEMPERATURE
-30 to + 85
o
C
Temperature range up to
Flow Specifications
85
o
C Operate Flow Rates
Flow Direction
Pressure to 10 bar (20
o
C) Pressure Drop
Low flow rate 0.5L/Min
available
Mechanical Specifications
Mounting
Pipe
Position
Thread
(reed-switch only) (reed-switch only)
Any Plane Connection 50g for 11ms
3/8"BSP
3/8" NPT
FCS - 01 = 3/8" BSP thread
FCS - 02 = 3/8" NPT thread
Fitted with 2 x 0.5 meters of 22 AWG 16/0.2mm UL 1015 PVC Insulation
Compact Design
DESIGN
FEATURES
Operating Characteristic
Switching, Sensing and Control Solutions
FCS
from GENTECH INTERNATIONAL LTD
Grangestone Industrial Estate, Ayrshire KA26 9PS, United Kingdom
Telephone: [phone] Fax: [phone]
Series
El
ectr
i
ca
l
C
onnect
i
ons
Part Number
Low pressure drop
Detailed chemical resistance information for specific liquids is available on request
.
Reed Switch reliability
Shock Vibration
500 HZduration
0.6 ± 0.3Litres/min, (0.13 ± 0.08 US Gallons/Min) Switch Horizontal
0.17 Bar (2.5PSI) at 10 Litres/min (2.64 US Gallons/min)
Arrow Indication
35g up to