Datasheet

10-2018, Rev. 1018
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
SCHRACK
General Purpose Relays
PCB Relays
Power PCB Relay U/UB (V23148) (Continued)
Coil versions, bistable 1 coil
Coil Rated Set Reset Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
001 3 2.3 0.75 8 1125
002 5 3.9 1.25 22 1136
003 6 4.7 1.5 33 1091
005 12 9.4 3.0 119 1210
007 24 18.7 6.0 475 1213
008 48 37.4 12.0 1750 1317
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data 2kV
rms
4kV
rms
Version Version
V23148-*0*** V23148-*1***
Initial dielectric strength
between open contacts 1000V
rms
1000V
rms
between contact and coil 2000V
rms
4000V
rms
Clearance/creepage
between contact and coil ≥2.5/2.5mm ≥3.5/3.5mm
Material group of insulation parts ≥IIIa ≥IIIa
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -25 to +70°C
Category of environmental protection
IEC 61810 RTIII - wash tight
Terminal type PCB-THT
Weight 8.7g
Vibration resistance (functional), form A/form B 10/10g
Shock resistance (functional), form A/form B 10/10g
Resistance to soldering heat THT
IEC 60068-2-20 260°C/5s
Packaging/unit 25 pcs.
PCB layout / terminal assignment
Bottom view on solder pins
Dimensions
Monostable and bistable 1 coil
Form A contact (NO)
Form C contact (CO)
Form B contact (NC)