Datasheet

1
06-2018, Rev. 0618
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Low Power PCB Relays
Miniature Power PCB Relay MSR V23061
n
1 pole 8/10A, 1form C (CO) or 1 form A (NO) contact
n
High inrush currents with AgSnO
2
contacts (TV4 0 65A)
n
4kV/8mm coil-contact
n
Reinforced insulation (protection class II)
n
Ambient temperature up to 85°C at 8A
n
Plastic materials according to IEC 60335-1 (domestic appliances)
Typical applications
HVAC, interface technology. PLC’s, power supplies, TV-/monitor control,
domestic appliances, Hi-Fi products, timers.
Approvals
VDE Cert. No. 40017849, UL E214025
Technical data of approved types on request.
Contact Data
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current
versions A,B 8A
versions C, D 10A
Limiting making current, max 4s, df 10% 15A
version A302, max 20ms 65A
Breaking capacity max. 2000VA
Contact material AgSnO
2
, AgNi90/10
Frequency of operation, with/without load 6/1200min-1
Operate/release time max. 10/5ms
Bounce time max., form A/form B 3/10ms
Contact ratings
Type Contact Load Cycles
IEC 61810
V23061-A1***-A302 A (NO) 8A, 250VAC, cosφ=1, 85°C 100x10
3
V23061-C2***-A802 A (NO) 10A, 250VAC, cosφ=1, 85°C 100x10
3
V23061-C2***-A802 A (NO) 5A, 250VAC, cosφ=1, 105°C 100x10
3
UL 508
V23061-A1***-A302 A (NO) TV4, Tungsten, 120VAC, 40°C 25x10
3
V23061-A1***-A302 A (NO) Pilot duty, A300, 40°C 6x10
3
V23061-C2***-A802 A (NO) 10A, 240VAC,
general purpose ,40°C 30x10
3
EN60730-1
V23061-A1***-A302 A (NO) 2(2)A, 250VAC, 85°C 100x10
3
V23061-C2***-A802 A (NO) 4(4)A, 250VAC, 85°C 100x10
3
Mechanical endurance, DC coil 10x10
6
operations
Coil Data
Coil voltage range 3 to 60VDC
Operative range, IEC 61810 2
Coil insulation system according UL classA or classF
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%
1)
mW
001 3 2.1 0.3 40 225
002 5 3.4 0.5 118 212
003 6 4.1 0.6 165 218
004 9 6.1 0.9 364 223
005 12 8.2 1.2 652 221
007 24 16.3 2.4 2270 254
009 48 32.6 4.8 8790 262
010 60 40.8 6.0 15265
1)
236
1) Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts 1000V
rms
between contact and coil 4000V
rms
Clearance/creepage
between contact and coil ≥8/8mm
Material group of insulation parts IIIa
Z