Data Sheet

SMD Power Resistors
Type 3520 Series
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
How to Order
3520 1K0 J T
Common Part
1 ohm
1000 milli ohms
1R0
1K ohm
1000 ohms
1K0
1 Meg ohm
1000000 ohms
1M0
Resistance Value
J - 5%
Tolerance
Pack Style
3520
T - 4000 / reel
Handling Recommendations
When flow soldering - the land width must be smaller than the Chip Resistor width to properly control the solder
application. Generally, the land width can be Chip Resistor width (W) x 0.7 to 0.8. When reflow soldering - solder
application amount can be adjusted. Thus the land width can be set to W x 1.0 to 1.3.
Dimensions
LW a b t
6.40 3.20 0.70 0.70 0.60
±0.20 ±0.20 ±0.10 ±0.20 ±0.10
L
a
W
t
b