Data Sheet

ManualsBrandsTE CONNECTIVITY ManualsResistorsSBCHE1122RJ Resistance wire 22 Ω Radial lead 11 W 5 % 1 pc(s)

Characteristics - Electrical

Resistance Values: Series E24 5% E12 10% (see tables for value

limits per style)

Resistance Tolerance: ±5% ±10%

Maximum Continuous Voltage: √P x R

Load Life: ΔR <±3% 1000 hours at 70°C

Power Rating: See Surface Temperature Curve (below)

Characteristics - Environmental and Mechanical

Temperature Coefficient of Resistance: 200ppm/°C (400ppm/°C below 18R)

Resistance to Solder Heat: ΔR < 0.2% (350°C for 2.5 seconds)

Voltage Coefficient of Resistance: Negligible

Operating Temperature Range: -55°C to +350°C

Load Stability: ΔR < 5% (full load at 70°C for 1000 hours)

Long Term Damp Heat: ΔR < 0.2% (21 days at 40°C for 93% humidity)

Shelf Life: ΔR < 1.0% (per 12 months)

Insulation Resistance: > 10000M

Dielectric Strength: 2000V RMS

Lead Material: Steel - Solder coat

Marking: Legend mark, Manufacturer name, type, ohmic value

and tolerance.

Surface Temperature Rise Curve Derating Curve

250

200

150

100

Surface Temperature

125

100

% of Power

024681012141618

Power in Watts

25 75 125 175 225 275 325 375

Ambient Temperature

SCBH2

SBCH4/5

SBCH6/7

SBCH8

SBCH11

SBCH15

NB - SBC Series will

run 15°C hotter than

described here

High Power Resistor

Type SBC (Square Ceramic) Series

1773278 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help

and inches unless otherwise reference purposes only.

specified. Values in brackets Specifications subject

are standard equivalents. to change.

Key Features

I Up to 17 Watts

I Fusible Styles

I Vertical or Axial

I Non Flammable

I Special Solvent

Resistance

I Customer Specials

Invited

I Widely Available from

Distribution

This range of Power Wirewound Resistors are wound on continuous glass fibre elements

or have a ceramic core depending on resistance value. The element is housed in a

ceramic case and sealed with an inorganic silica filler. Their construction gives a resistor

with high insulation resistance and low surface temperature, capable of withstanding high

overload currents. These resistors are ideally suited to a variety of applications within

industrial and commercial environments, where performance and reliability are of prime

importance. Applications include fan force ovens, cooker hoods, power supplies and triac

based speed controls. Custom Design Variants in value and style are welcomed.

Summary of content (3 pages)

PAGE 1
High Power Resistor Type SBC (Square Ceramic) Series Key Features I Up to 17 Watts I Fusible Styles I Vertical or Axial I Non Flammable I Special Solvent Resistance I Customer Specials Invited I Widely Available from Distribution This range of Power Wirewound Resistors are wound on continuous glass fibre elements or have a ceramic core depending on resistance value. The element is housed in a ceramic case and sealed with an inorganic silica filler.
PAGE 2
High Power Resistor Type SBC (Square Ceramic) Series Type SBC - SBCH (Axial Power Resistor) We offer three ceramic profiles for the main wattage sizes. These are for additional heat dissipation and vertical mounting of resistors. The suffix for each style is as follows:- SBC Standard SBCH 4/5/6/7 SBCH 8/11/15 Type SBCHE (For Vertical Mounting) We offer SBCHE Styles with one lengthened lead for vertical mounting. See additional hardware on last page. One Lead Length 20mm longer than case length.
PAGE 3
High Power Resistor Type SBC (Square Ceramic) Series Type SBCV - (Vertical Mount Style) Model Power Ohmic Values Max Min Max Dimensions A B L SBCV-6 7W R47 22K 9 10 25 SBCV-8 9W 1R0 8K2 9 10 38 SBCV-11 11 W 1R0 22K 9 10 50 SBCV-15 17 W 1R0 22K 9 10 75 Lead drawn through hole in ceramic Accessories This device is used with models SBCV. These can be used with SBCH/SBCV models. Order LC1 Support. Order BCV Support Pillar.