Information

Product Portfolio for the Railway Sector
Type HB Series
Literature No. 4-1773460-6 Dimensions are in millimeters Dimensions are shown for TE Connectivity / Berwyn, PA
Issued 3-11 and inches unless otherwise reference purposes only. For email, phone or live chat, go to: te.com/help
specified. Values in brackets Specifications subject
are standard equivalents. to change.
Type A B C D E F G H I
HBA
Uncoated 10.2 7 1.75 60.2 5.0 – – – –
Epoxy Coated 12.5 8 2.6 60.5 5.0 – – – –
HB01
Uncoated 8.4 26 1.5 33.8 22.9 26 66 1.5 8.4
Epoxy Coated 10.4 26.5 3.0 35.8 22.9 26.3 66 3 9.2
HB03
Uncoated 8.4 51.1 1.5 33.8 48.3 51.1 91.1 1.5 8.4
Epoxy Coated 10.4 52 3.0 35.8 48.3 53.5 91.1 3 9.6
Lead Length: minimum 20mm
Lead Diameter: Nominal 0.6 ±0.05mm
0 20 40 60 80 100 120 140
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
Power (Watt)
Ambient Temperature (°C)
HB3
HB1
HBA
0 0.5 1 1.5 2 2.5 3 3.5 4
100
90
80
70
60
50
40
30
20
10
0
Surface Temp. Rise (°C)
Power Dissipation (Watt)
HB3
HB1
HBA
TE Connectivity supplies standard and custom designed high value/high voltage
resistors for high voltage, industrial, control, medical and general-purpose use. The HB is
a tough epoxy coated high voltage resistor, with axial or radial leads, values up to 1GΩ and
an operational voltage to 20kV as standard and 30kV to order. The resistors are made from
quality materials for optimum reliability and stability. TE Connectivity can test resistors to
conform to relevant international, MIL or customer specifications. TE Connectivity offers
advise on the use of resistors for high frequency applications and to supply information for
high voltage use. Please contact your local Product Information Center or go to
te.com/help
Key Features
I Up to 15kV element
voltage
I High ratio of size to power
I 1k0Ω to 1G0Ω
I Low inductance
I Established proven
reliability
Applications
I High voltage divider
I Surge
I Filter
I Balancing
I Inrush limiting
Characteristics - Electrical
Derating Curve Surface Temperature Rise
Dimensions
HBA HB1 HB3
Power Dissipation - Power @ 20°C (70°C) (W): 0.8 (0.4) 2.0 (1.0) 4.0 (2.0)
Ohmic Value - min/max (Ohms): 1K-120M 10K-1G 10K-1G
Resistance Tolerance (%) (Tighter by Request): 1%, 2%, 5% 1%, 2%, 5% 1%, 2%, 5%
Maximum Working Voltage - DC or ACrms (Volts): 1kV 7.5kV 15kV
Insulation Resistance - Epoxy Coated, @500V DC (Ohms): >10
6
MΩ >10
6
MΩ >10
6
MΩ
Temperature Coefficient (ppm/°C): ±100ppm/°C ±100ppm/°C ±100ppm/°C
(±20ppm/°C Available to Special Order)
Negligible up to 100K Negligible up to 200K
Increasing to 0.02ppm/Volt at 800K Increasing to 0.01ppm/Volt at 1M0
Voltage Coefficient: Increasing to 1.0ppm/Volt at 5M0 Increasing to 1.0ppm/Volt at 10M
Increasing to 2.0ppm/Volt at 50M Increasing to 2.0ppm/Volt at 100M
Increasing to 8.0ppm/Volt at 100M Increasing to 8.0ppm/Volt at 1000M
Ambient Temperature Range (°C): -55 to 125 -55 to 125 -55 to 125
Encapsulation: Epoxy coating (Optional)
29
F
G
I
H
D
B
E
C
A
Rail brochure internal pages feb 11.qxd 17/3/11 13:12 Page 29