Datasheet

2014
AMP MONO-SHAPE
Connectors in In-Line Mating Technology
Catalogue 1654742
Revised 5-04
Dimensions are in inches and
millimetres unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Conversion Rate:
25.4mm = 1 inch
Products for Industrial &
Commercial Applications
Specifications subject to
change.
www.tycoelectronics.com
AMP MONO-SHAPE Connector Versions
METRIC
Dimensions are
millimetres over inches
Single Way Connectors
Single Way connectors with
insulation displacement
contacts for use on tinned
copper alloy tab 6.3 x 0.8 mm
according to DIN 46244.
Satellite Connectors
3 position connectors, pitch
5.0 mm, with short circuited
insulation displacement
contacts for harness shunts.
Wire Size Range:
0.5–1.5 mm
2
Current Rating:
16 Ampère max. acc. to wire size
TAB Connectors
2–12 position 5.0 mm pitch
connectors with insulation
displacement contacts mateable
with components according to
RAST 5 and with tinned copper
alloy tab 6.3 x 0.8 mm
according to DIN 46244.
Same Shape -
Different Applications
With the same outside shape
four connector versions are
available, which are to handle
with the same application
tooling.
Wire Size Range:
0.5–1.5 mm
2
Current Rating:
16 Ampere max. acc. to wire size
-For LIF version up to
10 Ampere max
Wire Size Range:
0.5–1.5 mm
2
Current Rating:
16 Ampere max. acc. to wire size
Supply Status:
In order to increase product-
ivity these items are supplied
in sticks.
Wire Size Range:
0.5–0.75 mm
2
Current Rating:
6 Ampere max. acc. to wire size
PC Board:
Single or both sides printed 5
µm tin over 35 µm copper
PCB Connectors
2–12 position 5.0 mm pitch
connectors with insulation
displacement contacts accor-
ding to printed circuit boards
with thickness 1.5
±0.2
mm and
5.0 mm pitch.
LIF version 2
point contact
instead of 4 as
per standard
version