Datasheet

ManualsBrandsTE Connectivity ManualsConnectorsPin header DIN 41651 64, Male

140

Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

AMPMODU Interconnection System

Universal Ejection Style

Pin Headers

Universal Ejection Style Pin Headers, Military, Center and Dual Polarized,

.100 x .100 [2.54 x 2.54] Centers

(Continued)

Right-Angle, 4-Sided

.025 [0.64] Sq. Posts

Pin Header

with Latches

Pin Header

without Latches

.100

[2.54]

.100

[2.54]

.100

[2.54]

.240

[6.10]

.038

[0.97]

.025

[0.64]

.025

[0.64]

.025

[0.64]

Dia.

.253

[6.43]

.107

[2.72]

.150

[3.81]

.150

[3.81]

.315

[8.00]

.336

[8.53]

.050

[1.27]

.190

[4.83]

.108

[2.74]

.549

[13.94]

.195

[4.95]

.096

[2.44]

Ty p.

Solder Tail

Pos. No. 1 Indicator

.289

[7.34]

.165

[4.19]

Note: All part numbers are RoHS

compliant.

Material and Finish

Housing & Latches — Black

thermoplastic, 94V-0 rated

Contacts — Brass or phosphor bronze

(at Tyco Electronics’ option); Duplex

.000030 [0.00076] gold on mating end,

.000100 [0.00254] min. tin on

termination end, with entire contact

underplated .000050 [0.00127] nickel

Related Product Data

Electrical Characteristics —

page 134

Mateable Connectors —

AMPMODU Wire-Applied

Receptacles — page 220

Mounting Information

4-24 self-tapping screws

and 2-56 bolts and nuts are

available for mounting

straight-thru pin headers of

pc boards. Typical applica-

tions and part nos. for

ordering this hardware are

presented below.

Note: 2-56 bolts and nuts may be

used to mount pin headers with and

without latches. If latches are to be

used, the bolts must be positioned in

the pin header before the latches are

installed.

No. of

Dimensions

Part Number

Positions

ABCD E

(Without Latches)

.700 1.100 1.260 .860

.110 [2.79] 5102160-1

17.78 27.94 32.00 21.84

.155 [3.94] 5102162-1

.900 1.300 1.460 1.060

.110 [2.79] 2-5102160-2*

22.86 33.02 37.08 26.92

.155 [3.94] 2-5102162-2*

1.000 1.400 1.560 1.180

.110 [2.79] 5102160-3

25.40 35.56 39.62 29.46

.155 [3.94] —

1.200 1.600 1.760 1.360

.110 [2.79] 5102160-4

30.48 40.64 44.70 34.54

.155 [3.94] —

1.400 1.800 1.960 1.560

.110 [2.79] 5102160-5

35.56 45.72 49.78 39.62

.155 [3.94] —

1.500 1.900 2.060 1.660

.110 [2.79] 5102160-6

38.10 48.26 52.32 42.16

.155 [3.94] 2-5102162-6*

1.900 2.300 2.460 2.060

.110 [2.79] 5102160-8

48.26 58.42 62.48 52.32

.155 [3.94] 5102162-8

2.200 2.600 2.760 2.360

.110 [2.79] 5102160-9

55.88 66.04 70.10 59.94

.155 [3.94] —

2.700 3.100 3.260 2.860

.110 [2.79] 1-5102160-0

68.58 78.74 82.80 72.64

.155 [3.94] 1- 5102162-0

Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization),

located as shown.

Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown.

*Blue housing.

Pin Header Mounting using 4-24 Self-Tapping Screws:

Part No. 19156-1 (for .062 [1.57] Thick PC Board)

Part No. 19156-2 (for .093 [2.36] Thick PC Board)

Part No. 19156-3 (for .125 [3.18] Thick PC Board)

Pin Header Mounting with 2-56 Bolts and Nuts:

Part No. 746383-1 (Bolt Only)

Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit)

4-24

Self-Tapping

Screw

(2 Req‘d.)

2-56

Bolt & Nut

(2 Each Req‘d.)

Latch

(See Note at left.)

.256

[6.50]

Note: Used with Header (optional)

Latch (sold separately)

Part Number 1825851-1