Information

4
Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Connector
(.050 x .100 [1.27 x 2.54] Centerline) Series III
AMPLIMITE .050 Series
Connectors, Series III
Product Facts
■ Compatible with SCSI-2,
SCSI-3, EIA RS-232,
ISO-11569*, HIPPI, IPI-2
and IEE 802.3 MII standards
■ High-density D type
interface
■ 2
0 through 100 contact
positions
■ Tab plug contacts and
tuning-fork receptacle
contacts, with reliable two-
point (redundant) contact;
contact normal force is not
dependent on plastic
housing support
■ Excellent EMI/RFI protection
■ Shields mate before
contacts, with ground mating
first and breaking last
■ Squeeze-to-release latches
or jackscrew hardware
■ Board connectors
compatible with standard
thru-hole flow solder and
surface-mount reflow solder
processes (Series III)
■ Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
■ Listed and complies with
UL 1863, Communication
Circuit Accessories
File No. E81956
■ Certified by Canadian
Standards
Association,
File No. 1088108
(LR 7189A-207)
■ Produced under a Quality
Management
System certified
to ISO 9001
■ A copy of the
certificate is available
upon request
R
R
R
Introduction
Shielded AMPLIMITE .050
Series connectors offer a
high-density D type
interface. Featuring .050 x
.100 [1.27 x 2.54] contact
centerline spacing, these
compact and reliable
connectors are available in
20 through 120 positions.
Their construction offers
exceptional EMI/RFI
shielding effectiveness.
Shielded AMPLIMITE .050
Series Connectors, Series III,
are approved to SCSI-2, SCSI-
3, EIA RS-232, ISO-11569*,
IPI-2, HIPPI, and IEE 802.3
MII standards.
Connectors are available in
cable-mount and panel
mount versions and vertical
and right-angle mount pcb
headers plus vertical mount
with ACTION PIN contacts.
The headers feature high
temperature housings for
reflow soldering processes.
Cable and panel connectors
use insulation displacement
contacts for fast termination
of discrete, round-to-flat
laminated, and ribbon
cable.
Series I, II and III
intermateability:
Only the 50 and 68 position
sizes are intermateable
between Series I, II, and III.
Backshells are available
with either a straight or
angled cable exit. Hard-
ware includes a choice of
integral squeeze-to-release
latches or jackscrews.
Unshielded, All-Plastic
Cable Plugs are available
in 50 through 100 positions
and offer an economical
answer to your connector
needs on applications
where EMI/RFI protection
is not a factor.
ISO
Cert
ified
9001
*26-position cable assembly
with spring latches
AMP Single Line and Multi
Line Models are available for
AMPLIMITE Subminiature D
Type connectors at
www.te.com/simulation.