Information

5
Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
AMPLIMITE Subminiature D Connectors
AMPLIMITE .050 Series Connector
(.050 x .100 [1.27 x 2.54] Centerline) Series III
(Continued)
AMPLIMITE .050 Series
Connectors, Series III
Product Facts
■ Compact design, profile for
the right-angle header
1
.230 x .588 [31.24 x
14.94], vertical header
1.230 x .433 [31.24 x
11.00], right-angle stacked
headers 1.230 x .803
[31.24 x 20.40]
■ H
ousings and covers made
of UL 94V-0 rated thermo-
plastic
■ Header footprint for right-
angle and stacked
configurations is .100 x
.050 [2.54 x 1.27]
staggered centerlines
■ Header footprint for vertical
configuration is .100 x .075
[2.54 x 1.90] staggered
centerlines
■ Right-angle and stacked
headers feature integral
boardlocks for positive
board retention and
grounding
■ Vertical headers feature 8
below the board, retentive
contact legs for mechanical
retention before and after
soldering
■ Vertical headers feature
polarized grounding posts
to assure correct header-to-
board orientation
■ Stacked headers reduce
overall total header volume
by 48% and PC board area
by 38%
■ Stacked headers offer
optional contact shield for
additional EMI/RFI
protection
■ Plugs preloaded with
insulation displacement
contacts (IDC) provide fast,
reliable and economical
terminations
■ Choice of three keying
positions, plus non-keyed
inserts for assurance
against mismatch mating
S
hielded AMPLIMITE .050
Series, Slimline Connectors
answer today’s industry
requirement for higher
density in a smaller overall
package. The present line
consists of 26 position,
shielded right-angle and
vertical PCB receptacle
h
eaders, 26 position
right-angle stacked PCB
receptacle header, and
mating 26 position plug
connectors. All header,
plug and backshell
housings are made of UL
94V-0 rated thermoplastic.
PCB headers are
compatible with surface
mount reflow solder
processes. Right-angle and
stacked PCB headers
feature contact footprints
on .100 x .050 [2.54 x 1.27]
staggered centerlines and
vertical header footprints
are on .100 x .075 [2.54 x
1.90] staggered
centerlines.
The compact design of the
right-angle header package
measures only 1.230 W x
.588 D x .300 H [31.24 W x
14.94 D x 7.62 H] for
maximum board real estate
conservation. Right-angle
PCB headers feature
integral boardlocks for
positive board retention
and grounding.
Vertical headers feature 8
below the board, retentive
contact legs for mechanical
retention before and after
soldering. Polarized
grounding posts provide
correct header-to-board
orientation. The complete
package occupies an area
only 1.230 W x .325 D x
.433 H [31.24 W x 8.26 D x
11.00 H].
Right-angle stacked headers
provide 52 contacts in a
package only .635 [16.13]
high, allowing parallel
(board-over-board) board
spacing of .800 [20.32].
C
enterlines between the
top connector and the
bottom connector measure
.335 [8.51] when compared
to .400 [10.06] on the
standard .050 Series
stacked headers. This
results in an overall
reduction of total header
v
olume, in comparison to
the standard AMPLIMITE
.050 Series header, of 48%,
and a comparative
reduction in PC board area
of 38%.
Stacked header board
retention and stabilization is
provided by two boardlocks
and four grounding posts.
In addition, an optional rear
contact shield is available
for additional EMI/RFI
protection.
The mating plug connector
consists of a thermoplastic
housing, preloaded with
insulation displacement
contacts (IDC) for fast,
reliable terminations that
offer greater applied cost
savings. TE offers a choice
of termination equipment to
meet your production
requirements.
The backshell hardware kit
includes a two-piece,
aesthetically designed,
thermoplastic cover over an
inner and outer shield and
two, high strength #2-56
male jackscrews with
insulated heads (easy
finger grip caps) to secure
mated connectors.
The AMPLIMITE .050
Series, Slimline family of
connectors offers keyed
coupling. This feature
reduces the problem of
mismatch mating of plug
and receptacle, particularly
in stacked applications.
There are three possible
keying arrangements, plus
unkeyed inserts to assure
maximum options for multi-
ple connector applications.