Information

108-1092
3.3. Ratings
! Voltage:
• UL: 250 volts Ac
• CSA: 125 volts AC
! Current:
• Right angle: 2 amperes maximum per contact
• Straight posted: 1.5 amperes maximum per contact
! Temperature:
• Regular housing: -55 to 105°C
• High temperature housing: -55 to 130°C
3.4. Performance and Test Description
Product is designed to meet electrical, mechanical and environmental performance requirements
specified in Figure 1. All tests are performed at ambient environmental conditions per AMP Specification
109-1 unless otherwise specified.
3.5. Test Requirements and Procedures Summary
Test Description Requirement Procedure
Examination of product. Meets requirements of product
drawing and Application
Specifications 114-40021 and 114-
40022.
Visual, dimensional and functional
per applicable quality inspection
plan.
ELECTRICAL
Termination resistance, dry circuit. 25 milliohms maximum final for 30
µin gold.
30 milliohms maximum final for 15
µin and gold flash.
∆R 10 milliohms.
TE Spec 109-6-1.
Subject mated contacts assembled
in housing to 50 mv open circuit at
100 ma maximum.
See Figure 3.
Dielectric withstanding voltage. 1000 volts AC at sea level. TE Spec 109-29-1.
Test between adjacent contacts
and between contacts and metal
shell of unmated connector
assemblies.
Insulation resistance. 5000 megohms minimum initial.
1000 megohms minimum final.
TE Spec 109-28-4.
Test between adjacent contacts of
unmated connector assemblies.
Temperature rise vs current. 30°C maximum temperatur e rise at
specified current.
TE Spec 109-45-1.
Measure temperature rise vs
current.
MECHANICAL
Vibration, random. No discontinuities greater than 1
microsecond.
See Note.
TE Spec 109-21-5, Test level G,
Duration 20 minutes.
Subject mated connectors to 23 G's
rms with 100 ma current applied.
See Figure 4.
Figure 1 (continued)
Rev F 2 of 8