Information

109
Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
AMPLIMITE Subminiature D Connectors
Note: All part numbers are RoHS compliant.
Cable Connectors
HDP-22 Crimp Snap-In Contact Connectors (Continued)
Application Tooling
Material
Pin—Brass
Socket—Phosphor bronze
Finish
A—Duplex plated .000030 [0.00076]
gold on mating end, tin on crimp barrel,
with entire contact nickel underplated
B—Duplex plated gold flash on mating
end, tin on crimp barrel, entire contact
nickel underplated
Related Product Data:
Performance Characteristics—
page 41
Connectors used with—pages 105-
107
Technical Documents:
Application Specification
—
114-10001
Product Specification—108-1268
Instruction Sheet—408-9381
Note: Instruction Sheets for TE Tooling
are packaged with the tooling. For
additional information call the Tooling
Assistance Center:
1-800-722-1111.
Precision Formed
Crimp Snap-In Contacts,
Size 22 DF
Pin
Socket
Insertion/Extraction
Tool No. 91285-1 (Instruction Sheet—408-9404)
This tool contains interchangeable tips to Insert/Extract
S
ize 22, 28-22 AWG [0.08-0.4 mm
2
]
Crimp Contacts
Size 20, 28-20 AWG [0.08-0.4 mm
2
] Crimp Contacts
Size 20, Posted Contacts
AMP-O-LECTRIC
MODEL “G”
Terminating Machine
A totally new design of our most
popular machine for bench-top
operation. It features a quiet and
highly-reliable direct motor drive,
electronic controls for ease of
setup and operation, and
improved guarding and lighting
for operator convenience and
safety. All versions also include
either manual or automatic
precision adjustment for crimp
height. Power requirement is
120 or 220 VAC, 50 or 60 Hz.
For further information, request
Catalog 65828.
AMP-O-MATIC
Model II
Stripper-Crimper Machine
This machine automatically
strips as well as terminates
individual wires. Similar to the
AMP-O-LECTRIC Model “G”
machine, applicators are quickly
interchangeable, and it includes
precision adjust ment for crimp
height. All adjustments can be
made from the front of the
machine without special tools.
Power requirement is 120 VAC.
Air requirement is 80-100 psi
[5.52-6.89 bar], 3.5 scfm
[0.00165 m
3
/s].
For further information request
Catalog 65004.
Applicators
To accommodate the broad
range of wire termination
products that TE pro duces,
most TE terminating machines
are designed for use with
interchangeable applicators.
The basic styles are quickly
interchangeable to minimize
costly down times, and feature
dial-in wire and insulation
crimp-height settings. Special
appli cators are now available
for use with the AMP Crimp
Quality Monitor, for measuring
the crimp height of each
termina tion as it is made, plus
evalu ating the quality of each
crimp.
For further information, request
Catalog 65404.
For applicator part numbers,
call the TE Tooling Assistance
Center at 1-800-722-1111.
PRO-CRIMPER II
Hand Tool
Part No. 90800-1
Features interchangeable die
sets and ratchet control that
provides full die closure to help
eliminate partial crimps. The
new design is more durable,
and requires dramatically less
hand force.
For further information, request
Catalog 82276.
Wire Contact
Contact Part Numbers
Hand Tools
Size
Insulation
Finish Pin Socket
for Loose Form Contacts
AWG
Diameter
(Plating
S
trip Loose Strip Loose
PRO-CRIMPER II CERTI-CRIMP II
mm
2
Max.
Code)
F
orm Form Form Form
Hand Tool Hand Tool
28-22 .040
A 1658670-1 1658670-2 1658686-1 1658686-2
0
.4-0.08 1.02
B 1658670-3 1658670-4 1658686-3 1658686-4
9
0800-1 91520-1
N
otes: 1. Strip form contacts shipped 20,000 pieces/reel.