Information

114- 10000
Rev V 11 of 11
6. VISUAL AID
Figure 8 shows a typical application of HD--20 Precision Formed Contacts. This illustration should be used by
production personnel to ensure a correctly applied product. Applications which DO NOT appear correct should
be inspected using the information in the preceding pages of this specification and in the instructional material
shipped with the product or tooling.
FIGURE 8. VISUAL AID
NOTE: CRIMPED CONTACT WITH INSULATION BARREL SHOW N; SAME REQUIREMENTS
ALSO APPLY TO CONTACTS WITHOUT I N SULATION BARREL
WIRE BARREL SEAM CLOSED WITH
NO CONDUCTOR STRANDS SHOWING
CONDUCTOR ENDS MUST BE
VISIBLE I N THIS AREA
WIRE CONDUCTORS AND
INSULATION MUST BE
UNDAMAGED
WIRE CONDUCTORS AND INSULATION MUST BOTH BE
VISIBLE I N THIS AREA (NO WIRE INSULATION MAY BE
IN THE W IRE BARREL)
REAR BELLMOUTH
MUST BE VISIBLE
FRONT BELLMOUTH MAY
SHOW SLIGHTLY
CUTOFF TAB MUST
BE VISIBLE
THEREMUSTBENO
TWIST, ROLL, OR BEND
HERE
THERE MUST BE NO DAMAGE OR
DISTORTION TO CONTACT OR
RETENTION FEATURE