Information

174
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK Sealed Connectors
AMP
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Sealed Connectors
.250 [6.35] Centerline
Standard Density
Splash Proof Seals
Product Facts
Economical splash proof/
immersible sealed connec-
tor system
No design changes to exist-
ing Universal MATE-N-LOK
product
Existing applications utiliz-
ing Universal MATE-N-LOK
connectors can be upgraded
to a splash proof system
Utilizes two wire seals and
one interface seal
Wire range is 20-14 AWG
[.5-2.0] with insulation
diameter range .060-.130
[1.52-3.30]
.110-.130 [2.79-3.30]
insulation diameter passed
European IP sealing level
5/6 + 7 (swirling dust/
immersion to 1 meter for
30 minutes)
.060-.110 [1.52-2.79]
insulation diameter passed
European IP sealing level
5/5 + 7 (swirling dust/
heavy seas)
Universal MATE-N-LOK II
keying plug can be used to
seal unused circuits
Primary application is for
wire-to-wire; wire-to-board
application must use a
closed bottom header
A
.030
[.762]
.300
[7.62]
A
.300
[7.62]
.400
[10.16]
.030
[.762]
.550
[13.97]
.800
[20.32]
A
.800
[20.32]
.400
[10.16]
.550
[13.97]
.400
[10.16]
.800
[20.32]
A
.030
[.762]
.800
[20.32]
2, 3, 4 Circuit, In-Line 6 Circuit, Matrix 9, 12, and 15 Circuit, Matrix
Wire
Wire interfaceinterfaceWire interface
Plug Housing
Mating
End
Contact
Cavity
Wire Seal
Pin Contact
Sealing Plug
Part Number 770377-1
Back Side
(Wire End)
Silos
Interface
Seal
Cap Housing
Wire Seal
Number of A Interface Seal Wire Seal
Circuits Dim Part Number Part Number
2.550 794269-1 794270-1
3.800 794271-1 794272-1
4 1.050 794273-1 794274-1
6—794275-1 794276-1
9.800 794277-1 794278-1
12 1.050 794279-1 794280-1
15 1.300 794281-1 794282-1
Note: One interface seal and two wire seals required per
mated assembly.
Note: All part numbers are RoHS Compliant.
Material
Silicone rubber, blue color
Technical Documents
Product Specification
108-1031-1 Splash Proof Seal,
Universal MATE-N-LOK
Connectors
Contacts—page 175
Housings—page 168
Instruction Sheet
408-3392 Universal MATE-N-LOK
Splash Proof Seals
Note: For proper use of this product, customer should make sure
that Instruction Sheet 408-3392 is available for review.