User Manual

114- 13120
Rev E16 of 17
5.3. Application Tool
Power for the seating tools and extraction tools must be provided by application tool (with a ram) capable of
supplying a downward force of 44.5 N [10 lb] per compliant pin contact. For available application tools, call
PRODUCT INFORMATION at the number at the bottom of page 1.
5.4. PC Board Support Fixture
A pc board support must be used with the seating tool and extraction tool. The support fixture provides proper
support for the pc board and protects the pc board and cage assembly from damage. When using the seating
tool or extraction tool, the support fixture must be customer designed according to the instructions included
with the tool being used.
Feed Strip Carrier Dimensions for Connector
Robotic Equipment
(Designed Upon Request)
PC Board Support Fixture
(Application Specific,
Customer Supplied)
SFP Cage Assembly Extraction Tools
(See Table)
(408--8849)
SFP PT Connector and Cage Assembly
Seating Tool Kits 1725609--[ ]
(408--8848)
SFP+ PT Connector and Cage Assembly
Seating Tool Kits 2018002--[ ]
(No Document Available)
SFP+ Cage Assembly Removal Tool
Assemblies (See Table)
(408--10300)
CAGE ASSEMBLY
S
E
A
T
I
N
G
T
O
O
L
K
I
T
D
E
X
T
R
A
C
T
I
O
N
O
R
R
E
M
O
V
A
L
T
O
O
L
Type Configuration
SEATING TOOL KITD
EXTRACTION OR REMOVAL TOOL
1¢2 1725609--3 1213709--1
SFP
1¢4
1725609--1 1725612--1
1¢6 1725609--2 1213710--1
1¢2 2018002--3 1976920--1
SFP+
1¢4
2018002--1 1976584--1
1¢6 2018002--2 1976597--1
Figure 13
D The seating tool kit cannot be used to seat the connector
or single port cage assembly.