Datasheet

02-2015, Rev. 0215
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
Micro Relay K (THT – THR) (Continued)
Automotive Relays
PCB Single Relays
Other Data
EU RoHS/ELV compliance compliant
Ambient temperature, DC coil -40 to +105°C
Cold storage, IEC 60068-2-1 1000h; -40°C
Dry heat, IEC 60068-2-2 1000h; +125°C
Climatic cycling with condensation,
EN ISO 6988 20 cycles, storage 8/16h
Temperature cycling (shock),
IEC 60068-2-14, Na 100 cycles; -40/+125°C
Temperature cycling,
IEC 60068-2-14, Nb 35 cycles; -40/+125°C
Damp heat cyclic,
IEC 60068-2-30, Db, variant 1 6 cycles 25°C/55°C/93%RH
Damp heat constant,
IEC 60068-2-3 method Ca 56 days 40°C/95%RH
Degree of protection
THT: RT III (61810), IP67 (IEC 60529)
THR: RT II (61810), IP56 (IEC 60529)
Sealing test, IEC 60068-2-17: THT Qc, method 2, 1min, 70°C
Corrosive gas
IEC 60068-2-42 10 days
IEC 60068-2-43 10 days
Vibration resistance (functional)
IEC 60068-2-6 (sine sweep) 10 to 500Hz; 6g
6)
Shock resistance (functional)
IEC 60068-2-27 (half sine) 6ms, up to 30g
6)
Terminal type PCB:THT, THR
Weight approx. 4g (0.14oz)
Solderability (aging 3: 4h/155°C) THT
IEC 60068-2-20 Ta, method 1, hot dip 5s, 215°C
Solderability THR
IEC60068-2-58 hot dip 5s 245°C
Resistance to soldering heat THT
IEC 60068-2-20 Tb, method 1A, hot dip 10s,
260°C with thermal screen
Resistance to soldering heat THR
IEC 60068-2-58 260°C; preheating min 130°C
Storage conditions according IEC 60068-1
7)
Packaging unit 2000 pcs.
6) Depending on mounting position: no change in the switching state >10μs.
7) For general storage and processing recommendations please refer to our Application
Notes and especially to Storage in the Definitions or at http://relays.te.com/appnotes/
Coil Data
Rated coil voltage 12VDC
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
001/801 12 6.9 1.5 254 0567
002/802 10 5.7 1.25 181 0552
051/851 10 6.5 1.1 90 1111
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coil operating range
Insulation Data
Initial dielectric strength
between open contacts 500VAC
rms
between contact and coil 500VAC
rms
0
50
100
150
200
250
300
-40-20 020406080100 120
Ambient temperature in °C
Umax
Uop (E=0V)
Does not take into account the temperature rise due to the contact current
E = pre-energization