Datasheet

06-2017, Rev. 0617
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
SCHRACK
General Purpose Relays
Force Guided Relays
Force Guided Relay SR6 A/B/C/V (Continued)
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -25 to 70°C
Category of environmental Protection
IEC 61 810 RTIII
1)
1) See product specification 2158003 4.6 and 4.8.
Weight 30g
Resistance to soldering heat THT
IEC 60068-2-20 260°C/5s
Packaging/unit tube/10 pcs.
For more detailed information see product specification 2158003
Insulation Data
Initial dielectric strength
between open contacts 1500V
rms
between contact and coil 4000V
rms
between adjacent contacts 3000V
rms
Clearance/creepage
between open contacts microdisconnection
between contact and coil ≥5.5/5.5mm
between adjacent contacts ≥5.5/5.5mm
Insulation to EN 50178, type of insulation
between contact and coil reinforced
between adjacent contacts reinforced
PCB layout / terminal assignment
Bottom view
3 form A + 3 form B, 3 NO + 3 NC versions
SR6 A
4 form A + 2 form B, 4 NO + 2 NC versions
SR6 B
5 form A + 1 form B, 5 NO + 1 NC versions
SR6 C
S0368-CA
S0368-CB
S0368-CA
S0368-CC S0368-CD
S0368-CE
4 form A + 2 form B, 4 NO + 2 NC versions
SR6 V
S0368-CU S0368-CV
The design of the SR6 V allows
clearance/creepage of 5.5 mm
on the PCB.
Dimensions
S0367-DN
SR6 A/B/C
S0367-DU
SR6 V