Datasheet
2
3-2018, Rev. 0318
www.te.com
© 2018 TE Connectivity Ltd. family
of companies. All rights reserved.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
OEG
General Purpose
Power PCB Relays
Miniature PCB Relay OJ/OJE (Continued)
Insulation Data
Initial dielectric strength
between open contacts 750V
rms
between contact and coil OJ: 4000V
rms
OJE: 3000V
rms
Initial insulation resistance
between insulated elements 1000Mohms min
Clearance/creepage
between contact and coil OJ: > 7.7mm / 9.4mm
between contact and coil OJE: > 3.2mm / 3.6mm
Tracking index of relay base PTI 250
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DM: -30°C to +85°C
HM: -30°C to +70°C
HM2, HM6: -30°C to +85°C
LM -30°C to +90°C
LMH: -30°C to +70°C
LMH2: -30°C to +85°C
Category of environmental protection
IEC 61810 RTII - flux proof/dust protected
RTIII - wash tight
Vibration resistance (functional) 10 to 55 hz., 1.5mm double amplitude
Vibration resistance (ddestructive) 10 to 55 hz., 1.5mm double amplitude
Shock resistance (functional) 10g
Shock resistance (destructive) 100g
Weight 9g
Resistance to soldering heat THT
IEC 60068-2-20 RTII: 270°C/10s
RTIII: 260°C/5s
Packaging unit tray/100, carton box/1000
Dimensions
PCB layout
Bottom view on solder pins
06-2011, Rev. 0611
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
OEG
General Purpose Relays
PCB Relays
Miniature PCB Relay OJ/OJE
(Continued)
Insulation Data
Initial dielectric strength
between open contacts 750V
rms
between contact and coil OJ: 4000V
rms
OJE: 3000V
rms
Clearance/creepage
between contact and coil OJ: > 7.7mm / 9.4mm
between contact and coil OJE: > 3.2mm / 3.6mm
Tracking index of relay base PTI 250
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DM: -30°C to +85°C
HM: -30°C to +70° C
HM2: -30°C to +85°C
LM -30°C to +90°C
LMH: -30°C to +70°C
LMH2: -30°C to +85°C
Category of environmental protection
IEC 61810 R T I I - d u s t p r o t e c t e d
RTIII - wash tight
Shock resistance (functional) 10g
Shock resistance (destructive) 100g
Weight 9g
Resistance to soldering heat THT
IEC 60068-2-20 RTII: 270°C/10s
RTIII: 260°C/5s
Packaging unit tray/100, carton box/1000
Dimensions
PCB layout
Bottom view on solder pins
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0
1
2
3 45 67
8
9 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0
1
2
3 45 67
8
9 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
Terminal assignment
Bottom view on solder pins
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0
1
2
3 45 67
8
9 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
Product code structure Typical product code OJ -SH -1 12 LMH F -WG ,000
Type
OJ Miniature PCB Relay OJ, 4kV dielectric between coil and contacts
OJE Miniature PCB Relay OJE, 3kV dielectric between coil and contacts
Category of protection
SS Fux proof
SH Wash tight
Number of poles
1 1 pole
Coil voltage
Coil code: please refer to coil versions table (e.g. 12 = 12VDC)
Contact rating and coil power
450 mWcoil power 200mW coil power
DM 5A type, coil power 450mW LM 3A type, coil power 200mW
TM TV-5 type, coil power 450mW LMH 8A type, coil power 200mW
HM 10A type, coil power 450mW LMH2 8A type, coil power 200mW
HM2 10A type, coil power 450mW
Insulation system designation
Blank Insulation Class E (standard) F Insulation Class F
Special type
Blank Standard WG For domestic appliances (IEC 60335-1, 4 Edition)
Suffix
,000 Standard
06-2011, Rev. 0611
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
OEG
General Purpose Relays
PCB Relays
Miniature PCB Relay OJ/OJE
(Continued)
Insulation Data
Initial dielectric strength
between open contacts 750V
rms
between contact and coil OJ: 4000V
rms
OJE: 3000V
rms
Clearance/creepage
between contact and coil OJ: > 7.7mm / 9.4mm
between contact and coil OJE: > 3.2mm / 3.6mm
Tracking index of relay base PTI 250
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DM: -30°C to +85°C
HM: -30°C to +70°C
HM2: -30°C to +85°C
LM -30°C to +90°C
LMH: -30°C to +70°C
LMH2: -30°C to +85°C
Category of environmental protection
IEC 61810 R T I I - d u s t p r o t e c t e d
RTIII - wash tight
Shock resistance (functional) 10g
Shock resistance (destructive) 100g
Weight 9g
Resistance to soldering heat THT
IEC 60068-2-20 RTII: 270°C/10s
RTIII: 260°C/5s
Packaging unit tray/100, carton box/1000
Dimensions
PCB layout
Bottom view on solder pins
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0
1
2
3 45 67
8
9 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0
1
2
3 45 67
8
9 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
Terminal assignment
Bottom view on solder pins
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0
1
2
3 45 67
8
9 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
Product code structure Typical product code OJ -SH -1 12 LMH F -WG ,000
Type
OJ Miniature PCB Relay OJ, 4kV dielectric between coil and contacts
OJE Miniature PCB Relay OJE, 3kV dielectric between coil and contacts
Category of protection
SS Fux proof
SH Wash tight
Number of poles
1 1 pole
Coil voltage
Coil code: please refer to coil versions table (e.g. 12 = 12VDC)
Contact rating and coil power
450 mWcoil power 200mW coil power
DM 5A type, coil power 450mW LM 3A type, coil power 200mW
TM TV-5 type, coil power 450mW LMH 8A type, coil power 200mW
HM 10A type, coil power 450mW LMH2 8A type, coil power 200mW
HM2 10A type, coil power 450mW
Insulation system designation
Blank Insulation Class E (standard) F Insulation Class F
Special type
Blank Standard WG For domestic appliances (IEC 60335-1, 4 Edition)
Suffix
,000 Standard
Terminal assignment
Bottom view on solder pins
06-2011, Rev. 0611
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
OEG
General Purpose Relays
PCB Relays
Miniature PCB Relay OJ/OJE
(Continued)
Insulation Data
Initial dielectric strength
between open contacts 750V
rms
between contact and coil OJ: 4000V
rms
OJE: 3000V
rms
Clearance/creepage
between contact and coil OJ: > 7.7mm / 9.4mm
between contact and coil OJE: > 3.2mm / 3.6mm
Tracking index of relay base PTI 250
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DM: -30°C to +85°C
HM: -30°C to +70°C
HM2: -30°C to +85°C
LM -30°C to +90°C
LMH: -30°C to +70°C
LMH2: -30°C to +85°C
Category of environmental protection
IEC 61810 R T I I - d u s t p r o t e c t e d
RTIII - wash tight
Shock resistance (functional) 10g
Shock resistance (destructive) 100g
Weight 9g
Resistance to soldering heat THT
IEC 60068-2-20 RTII: 270°C/10s
RTIII: 260°C/5s
Packaging unit tray/100, carton box/1000
Dimensions
PCB layout
Bottom view on solder pins
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0
1
2
3 45 67
8
9 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0
1
2
3 45 67
8
9 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
Terminal assignment
Bottom view on solder pins
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number B OJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
0 .1
0.2
0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0
1
2
3 45 67
8
9 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
Product code structure Typical product code OJ -SH -1 12 LMH F -WG ,000
Type
OJ Miniature PCB Relay OJ, 4kV dielectric between coil and contacts
OJE Miniature PCB Relay OJE, 3kV dielectric between coil and contacts
Category of protection
SS Fux proof
SH Wash tight
Number of poles
1 1 pole
Coil voltage
Coil code: please refer to coil versions table (e.g. 12 = 12VDC)
Contact rating and coil power
450 mWcoil power 200mW coil power
DM 5A type, coil power 450mW LM 3A type, coil power 200mW
TM TV-5 type, coil power 450mW LMH 8A type, coil power 200mW
HM 10A type, coil power 450mW LMH2 8A type, coil power 200mW
HM2 10A type, coil power 450mW
Insulation system designation
Blank Insulation Class E (standard) F Insulation Class F
Special type
Blank Standard WG For domestic appliances (IEC 60335-1, 4 Edition)
Suffix
,000 Standard
Product code structure Typical product code OJ -SH -1 12 LMH F -WG ,000
Type
OJ Miniature PCB Relay OJ, 4kV dielectric between coil and contacts
OJE Miniature PCB Relay OJE, 3kV dielectric between coil and contacts
Category of protection
SS Flux proof
SH Wash tight
Number of poles
1 1 pole
Coil voltage
Coil code: please refer to coil versions table (e.g. 12 = 12VDC)
Contact rating and coil power
450 mW coil power 200mW coil power
DM 5A type, coil power 450mW LM 3A type, coil power 200mW
HM 10A type, coil power 450mW LMH 8A type, coil power 200mW
HM2 10A type, coil power 450mW LMH2 8A type, coil power 200mW
HM6 10A type, coil power 450mW
Insulation system designation
Blank Insulation Class E (standard) F Insulation Class F
Special type
Blank Standard WG For domestic appliances (IEC 60335-1)
Suffix
,000 Standard