Datasheet

1
9-2019, Rev. 0919
www.te.com
© 2019 TE Connectivity Ltd. family of
companies. All rights reserved.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
https://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
OEG
General Purpose
Low Power PCB Relays
Miniature PCB Relay OJT
n
UL TV-8 rating (HM type) and UL TV-5 rating (LM/DM type)
n
10A rating (HM type) and 5A rating (LM/DM type)
n
Small size (18.2 x 10.2 x 14.7H)
n
4000Vrms coil to contact dielectric strength
n
Sensitive coil optional (LM type)
Typical applications
Lighting, smart plug, appliances, industrial control.
Approvals
VDE 40007630, TUV R 50432700, UL E82292, CQC08001025528
Technical data of approved types on request.
Contact Data
Contact arrangement 1 form A, 1 NO
Rated voltage 250VAC
Max. switching voltage 250VAC
Rated current 10A (OJT-HM)
5A (OJT-LM/DM)
Contact material AgSnO
Min. recommended contact load 100mA at 5VDC
Frequency of operation 360 ops./h
Operate/release time max. 15ms/4ms
Electrical endurance
UL508
HM TV-8, 120VAC 25x10
3
ops.
LM TV-5, 120VAC 25x10
3
ops.
DM TV-5, 120VAC 25x10
3
ops.
UL/CQC/TUV/VDE
HM 10A, 250VAC, +85°C 10x10
3
ops.
HM 10A, 250VAC, +25°C 30x10
3
ops.
UL/CQC/VDE
DM 5A, 250VAC res, +85°C 10x10
3
ops.
LM 5A, 250VAC res, +70°C 100x10
3
ops.
Contact ratings LM/DM: TV-5 120VAC
LM/DM: 5A 250VAC
HM: TV-8 120VAC
HM: 10A 250VAC
Mechanical endurance, DC coil DM/LM: 5x10
6
operations
HM: 1.5x10
6
operations
Coil Data
Coil voltage range DM/LM: 5 to 48VDC
HM: 5, 12 and 24VDC
Operative range, IEC 61810 2
Coil insulation system according UL Class F
Coil versions, DC coil, OJT-LM sensitive type
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
005 5 3.75 0.25 100 250
006 6 4.5 0.3 144 250
009 9 6.75 0.45 324 250
012 12 9 0.6 576 250
024 24 18 1.2 2304 250
036 36 27 1.8 5184 250
048 48 36 2.4 9216 250
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Contact Data (continued)
Coil versions, DC coil, OJT-DM standard type
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
005 5 3.5 0.25 55.6 450
006 6 4.2 0.3 80 450
009 9 6.3 0.45 180 450
012 12 8.4 0.6 320 450
024 24 16.8 1.2 1280 450
036 36 25.2 1.8 2880 450
048 48 33.6 2.4 5120 450
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coil versions, DC coil, OJT-HM standard type
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
005 5 3.5 0.25 55.6 450
012 12 8.4 0.6 320 450
024 24 16.8 1.2 1280 450
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts 750V
rms
between contact and coil 4000V
rms
Clearance/creepage
between contact and coil ≥ 6.4mm / 6.4mm
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -40°C to +85°C
Category of environmental protection
IEC 61810 RTII - flux proof
RTIII - wash tight (LM/DM type only)
Shock resistance (functional) 10g
Shock resistance (destructive) 100g
Weight Approx. 6.0g
Resistance to soldering heat THT
IEC 60068-2-20 RTII: 270°C/10s
RTIII: 260°C/5s
Packaging unit tray/100, Carton box/1000
tube/50, Carton box/2000
Z
t