Datasheet
76
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Note: All part numbers are RoHS compliant.
Low Profile Headers
Low Profile Pin Headers, Center and Dual Polarized,
.100 x .100 [2.54 x 2.54] Centerlines
Material and Finish
Housing — Glass-filled nylon,
UL 94V-0 rated, black
Posts — Brass, plated as follows:
Plating A — Duplex plated, gold flash
over palladium-nickel, .000030
[0.00076] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000030 [0.00076] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Plating B — Duplex plated, gold flash
over palladium-nickel, .000015
[0.00038] min. total on mating surfaces,
.000100 [0.00254] min. tin on solder
area, with entire post underplated
.000050 [0.00127] min. nickel
or .000015 [0.00038] min. gold on
mating surfaces, .000100 [0.00254]
min. tin on solder area, with entire post
underplated .000050 [0.00127] min.
nickel
Related Product Data
Electrical Characteristics —
page 75
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles
AMPMODU Board Mount
Receptacles
Short Point Wire-Applied
Connectors
Novo Receptacles and Female
Socket Connectors, 609, 622 and
636 Series —
pages 48-55
Vertical PCB Mount
.025 [0.64] Square Post
(Mating End)
.045
[1.14]
.165
[
4.19]
.
100
[2.54]
.
025
± .001
[0.64
± 0.03
]
.360
[9.14]
.130
[3.30]
A
B
Typ.
Pin 1
Pin 2
.041
[
1.04]
.388
[9.86]
.
185
± .010
[4.70
± 0.25
]
.185
[
4.70]
.
100
[2.54]
.120
± .015
[3.05
± 0.38
]
.
025
± .001
[0.64
± 0.03
]
.015
.010
[
0.38
]
0
.25
.240
[
6.10]
Typ.
Recommended PC Board Hole Layout
For Manual Insertion
.100
[2.54]
.035
± .003
[0.89
± 0.08
]
.100
[2.54]
Typ.
Dia. Typ.
No. of
Dimensions Post Plating/Part Nos.
Pos.
AB Plating A Plating B
10 .800 [20.32] .400 [10.16] 5103309-1 5103308-1
14 1.000 [25.40] .600 [15.24] 5103309-2 5103308-2
16 1.100 [27.94] .700 [17.78] 5103309-3 5103308-3
20 1.300 [33.02] .900 [22.86] 5103309-5 5103308-5
24 1.500 [38.10] 1.100 [27.94] — 1-5103308-3
26 1.600 [40.64] 1.200 [30.48] 5103309-6 5103308-6
34 2.000 [50.80] 1.600 [40.64] 5103309-7 5103308-7
40 2.300 [58.42] 1.900 [48.26] 5103309-8 5103308-8
50 2.800 [71.12] 2.400 [60.96] 1-5103309-0 1-5103308-0
60 3.300 [83.82] 2.900 [73.66] — 1-5103308-2
+.000
-.010
+0.00
[
-0.25
]