Datasheet

1
07-2018, Rev. 0718
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
OEG
General Purpose
Solar Relays
n
1 pole 26A, 1 form A (NO) contact
n
Contact gap >1.5mm
n
200mW hold power
n
Ambient temperature up to 75°C, 85°C at 22A
n
the appliance is able to meet VDE V 0126-1-1
Typical applications
Photovoltaic Inverter
Approvals
VDE Cert. No. 40012548, UL E58304
Technical data of approved types on request.
Contact Data
Contact arrangement 1 form A (NO)
Contact gap >1.5mm
Rated voltage 277VAC
Rated current 26A
Breaking capacity max. 7200VA
Contact material AgSnO
2
Frequency of operation, with/without load 6/300min
-1
Operate/release time max. 20/10ms
Bounce time max., form A 3ms
Contact ratings
Type Contact Load Cycles
IEC 61810 / UL 508
PCFN-1..H2MG A (NO) 26A, 277VAC, cosφ=1, 75°C 30x10
3
PCFN-1..H2MG A (NO) 22A, 250VAC, cosφ=1, 85°C 30x10
3
PCFN-1..H2MG A (NO) 14A, 250VAC, cosφ=1, 85°C 100x10
3
UL 508
PCFN-1..H2MG A (NO) 26A, 277VAC, resistive, 75°C 30x10
3
PCFN-1..H2MG A (NO) 22A, 277VAC, resistive, 85°C 30x10
3
Mechanical endurance, DC coil 1x10
6
operations
Coil Data
Rated coil voltage 12 to 24VDC
Coil insulation system according UL Class F
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
12 12 7.8 1.2 96 1.5
1)
24 24 15.6 2.4 384 1.5
1)
1) Ambient temperature > 23°C requires reduction of coil voltage to 4.4 to <6V after 100ms.
Hold voltage >=4.4V at ambient temperature ≤85°C.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts 2500V
rms
between contact and coil 4000V
rms
Clearance/creepage
between contact and coil 6.1/6.1 mm
Material group of insulation parts III
Tracking index of relay base PTI 175
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -25 to +75°C
1)
-25 to +85°C at 22A
Category of environmental protection
IEC 61810 RTII - flux proof
Vibration resistance (functional) 10g
Vibration resistance (destructive) 10g
Shock resistance (destructive) 100g
Terminal type PCB-THT
Mounting distance ≥10mm
Weight 28g
Resistance to soldering heat THT
IEC 60068-2-20 260°C/5s
Packaging unit tube/20 pcs., box/500 pcs.
1) Ambient temperature > 23°C requires reduction of coil voltage to 4.4 to <6V after 100ms.
Power PCB Relay PCFN Solar
Z