Information

145
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Commercial MATE-N-LOK Connectors
AMP
Soft Shell
Pin and Socket Connectors
Commercial MATE-N-LOK Connectors .200 [5.08] Centerline
Standard Density
Performance Characteristics
The Commercial MATE-N-LOK
Connector performance characteristics
found on pages 145-146 are based on
free-hanging and panel mount connec-
tors, loaded with contacts crimped on
stranded wire.
Dielectric Withstanding Voltage—
1.5 KVAC between adjacent circuits
Insulation Resistance—
500 megohms minimum initial between
adjacent circuits
Voltage Rating—250 V AC or DC
Connector Mating—
4 lb. max. per circuit
Connector Unmating—
0.7 lb. min. per circuit
Contact Retention—15 lb. min.
per contact
Durability—50 cycles, mating and
unmating
Product Facts
■ Fully polarized nylon
housings
■ Easy cavity identification
■ Locking devices are integral
part of design. Connector
halves will hold together
under severe conditions of
vibration and shock
■ Built-in contact stabilization
and self-aligning features
■ Hot side egg-crate design
for safety
■ Precision molded to exact-
ing tolerances
■ Contacts accept a wire
size range of 30-14 AWG
[.05-2.0 mm
2
]
■ Keying plug available
■ “Clean” design contact— no
sharp projections to impede
insertion or damage
housings
■ Low insertion/extraction
forces
■ Contacts available in pre-tin
or gold over nickel plated to
fit the application require-
ments
■ Wire-to-PC Board capability
using pin or socket headers
■ Solderability—Headers meet
MIL-STD 202 method 208
■ Four circuit PC Board-to-PC
Board capability available
by mating vertical socket
header with either vertical,
right-angle or surface mount
pin header
■ Four circuit insulation dis-
placement connector (IDC)
available
■ Ultraviolet (UV) stable
housings available in 1, 2
and 3 circuit
■ Not for interrupting current
■ Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
■ Certified by Canadian
Standards Association,
File No. LR 7189A
R
R
Technical Documents
Product Specifications
108-1000 Commercial MATE-N-LOK
Connectors
108-1077 Commercial MATE-N-LOK
PC Board Headers
108-49000 IDC Connectors
Application Specifications
114-1012 Commercial MATE-N-LOK
Contacts
114-49001 IDC Connectors
Instruction Sheets
408-7209, 408-7166, 408-7200,
408-7201, 408-7215, 408-3186,
408-7300