Information

183
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Universal MATE-N-LOK II Connectors
AMP
Soft Shell
Pin and Socket Connectors
Standard Density
Universal MATE-N-LOK II Connectors .250 [6.35] Centerline
Performance Characteristics
The Universal MATE-N-LOK II
Connector performance characteristics
found on pages 183-184 are based on
free-hanging and panel mount connec-
tors, loaded with contacts crimped on
stranded wire.
Dielectric Withstanding Voltage—
5.0 KV AC or DC between adjacent
circuits initially
Insulation Resistance—
1000 megohms minimum between
adjacent circuits
Voltage Rating—600 V AC or DC
Connector Mating—
Split Pin—1.5 lb. max. per circuit
Connector Unmating—
Split Pin—.5 lb. min. per circuit
Contact Insertion Force—3.0 lb.
max. per contact unassembled
Contact Retention—35 lb. min. per
contact
Durability—50 cycles, mating and
unmating
Product Facts
■ High reliability
■ For use where repair or re-
placement would be difficult
■ Pins and sockets can be
intermixed in the same
housing
■ Available in 2 through
15 circuit sizes for free-
hanging or panel mount
wire-to-wire connection
■ Mate with standard
Universal MATE-N-LOK
Housings and PC Board
Headers
■ Uses standard Universal
MATE-N-LOK panel cutouts
and strain reliefs
■ Polarized housings available
in UL94V-0 flammability
rated material
■ Enclosed contacts for shock
protection
■ F-Crimp terminals accept
30-10 AWG [.05 -5.0 mm
2
]
wire sizes
■ Contacts available in strip
and loose form
■ Lanceless contacts for
tangle-free handling
■ Insulation capability to
.200 [5.08] diameter
■ Connector design provides
for complete contact
insertion
■ Three-point stabilization pre-
cisely controls contact align-
ment, minimizing stubbing
■ Tin or duplex gold plated
contacts
■ Contacts are on .250 [6.35]
centerline spacing
■ Not for interrupting current
■ Recognized under the
Component
Program of
Underwriters Laboratories
Inc., File No. E28476
■ Certified by Canadian
Standards Association,
File No. LR 7189
■ Passed test by VDE under
their Registration Number
3980/Continuous
Surveillance
R
R
Technical Documents
Product Specification
108-1090 Universal MATE-N-LOK II
Connectors
Application Specification
114-1043 Universal MATE-N-LOK II
Connectors
Instruction Sheet
408-3200 Housing, Contacts and
Accessories