Information

Product Specification 108-5262
Rev. C6 3 of 14
2.2 Reference Documents:
JASO D 605 : Automotive Multi-pole Connectors
JASO D 7101 : Test Methods for Molded Plastic Parts
JIS C 3406 : Low Voltage Cables for Automobiles
JIS D 0203 : Method of Moisture, Rain and Spray Test for Automobile Parts
JIS D 0204 : Method of High and Low Temperature Test for Automobile Parts
JIS D 1601 : Vibration Testing Method for Electronic Components
JIS D 0205 : General Rules of Weatherability for Automobile Testing
JIS K 6301 : Physical Testing Methods for Vulcanized Rubber
JIS K 2202 : Gasoline for Automobiles
2.3 Definition of Terms:
2.3.1 Contact:
An electrically conductive metallic member, used independently or as a component of a
connector assembly to form circuit connection by contacting.
2.3.2 Housing:
A dielectric component member of a connector made of insulating material that encapsulate
contact in its contact cavities. In this product line, cap housing that encapsulates tab contacts,
and plug housing that encapsulates receptacle contacts are available.
2.3.3 Double Lock Plate:
Attached to the housing, this plate is intended to detect improper contact mating as well as to
increase contact retention force.
2.3.4 Rubber Plug:
Attached to wire side of tab contact and receptacle contact, this plug is purposed for
water-proofing.
2.3.5 Cavity Plug:
This plug is used for blinding housing holes of unused contact position for such connector as
having two or more positions.
2.3.6 Seal Ring:
This ring is attached to plug housing and serves for water-proofing when mated with cap
housing.