Information

Product Specification 108-5262
Rev. C6 2 of 14
Part Number Descriptions
174257 .070 Series 4-Position Plug Housing
174258 Double Lock Plate for .070 Series 4-Position Plug Housing
174259 .070 Series 4-Position Cap Housing
174260 Double Lock Plate for .070 Series 4-Position Cap Housing
174262 .070 Series 6-Position Plug Housing
174263 Double Lock Plate for .070 Series 6-Position Plug Housing
174264 .070 Series 6-Position Cap Housing
174265 Double Lock Plate for .070 Series 6-Position Cap Housing
174982 .070 Series 8-Position Plug Housing
174983 Double Lock Plate for .070 Series 8-Position Plug Housing
174984 .070 Series 8-Position Cap Housing
174985 Double Lock Plate for .070 Series 8-Position Cap Housing
174655 .070 Series 10-Position Plug Housing
174656 Double Lock Plate for .070 Series 10-Position Plug Housing
174657 .070 Series 10-Position Cap Housing
174658 Double Lock Plate for .070 Series 10-Position Cap Housing
174661 .070 Series 12-Position Plug Housing
174662 Double Lock Plate for .070 Series 12-Position Plug Housing
174663 .070 Series 12-Position Cap Housing
174664 Double Lock Plate for .070 Series 12-Position Cap Housing
Fig.1(End)
2. Applicable Documents:
The following documents form a part of this specification to the extent specified herein. In the
event of conflict between the requirements of this specification and the product drawing, the
product drawing shall take precedence. In the event of conflict between the requirements of this
specification and the referenced documents, this specification shall take precedence.
2.1 TE Specifications:
A. 109-5000 : Test Specification, General Requirements for Test Methods
B. 114-5082 : Application Specification, Crimping Contacts for AMP-ECONOSEAL-J Mark Ⅱ
+
114-5230 Connector
C. 501-5322 : Qualification Test Report
D. 412-5325 : AMP-ECONOSEAL-J Mark Ⅱ
+
Connector