Product Specification 108-40018 11Mar11 Rev F AMP-LATCH* and IDC Header Connectors, .100 X .100 Inch Grid 1. SCOPE 1.1. Content This specification covers perform ance, tests and quality requirem ents for AMP-LATCH* universal and low profile, and IDC standard and low profile .100 X .100 inch grid headers, right angle and vertical assem blies. 1.2. Qualification W hen tests are perform ed on subject product line, procedures specified in Figure 1 shall be used.
108-40018 3.3. Ratings ! ! ! 3.4. Voltage: 250 volts AC Current: Signal application only, 1 am pere m axim um per contact Tem perature: -65 to 105°C Perform ance and Test Description Product is designed to m eet electrical, m echanical and environm ental perform ance requirem ents specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental conditions per Test Specification 109-1. 3.5.
108-40018 Test Description Requirem ent Procedure ENVIRONMENTAL Therm al shock. See Note. EIA-364-32, Test Condition II. Subject unm ated specim ens to 5 cycles between -65 and 105°C with 30 m inute dwells at tem perature extrem es. Hum idity/tem perature cycling. See Note. EIA-364-31, Method III. Subject unm ated specim ens to 10 cycles (10 days) between 25 and 65°C at 80 to 100% RH with cold shock.
108-40018 4. QUALITY ASSURANCE PROVISIONS 4.1. Qualification Testing A. Specim en Selection Specim ens shall be prepared in accordance with applicable Instruction Sheets and shall be selected at random from current production. All test groups shall each consist of a m inim um of 5 headers of each type. B. Test Sequence Qualification inspection shall be verified by testing specim ens as specified in Figure 2. 4.2.
108-40018 AMP-LATCH Low Profile Header AMP-LATCH Universal Header IDC Standard Profile Header IDC Low Profile Header Figure 3 Contact Retention Rev F 5 of 5