Information

ManualsBrandsTE CONNECTIVITY ManualsPCB ConnectorsSocket enclosure - cable FASTIN-FASTON Total number of pins 1 1 pc(s)

FASTON

Terminals and Connectors

RoHS

Ready

Summary of content (48 pages)

PAGE 1
RoHS Ready FASTON Terminals and Connectors
PAGE 2
TYCO ELECTRONICS TECHNOLOGY PORTFOLIO ● Connector Systems / Electromechanical Components ● Relays ● Wireless ● Antennas, GPS Antennas, Integrated Antenna Systems ● Sensors ● Wire & Cable ● Resistors and Inductors ● Circuit Protection Devices ● Heat Sinks /Thermal Management ● Touchscreens / Interactive Displays ● Switches ● Application Tooling ● Battery Assemblies ● Fiber Optic (Passive) ● Power Systems / Electronic Modules ● Heat Shrink Tubing ● Magnetics 1 ● Identification & Labeling Product
PAGE 3
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Contents FASTON Connection System Page Straight Receptacles 6.3 mm (.250 Series) …………………………………………………………………………………………………………6 Straight Receptacles LIF (Low Insertion Force) 6.3 mm (.250 Series) ……………………………………………………………6 Straight Receptacle and Tab Combinations 6.3 mm (.250 Series) …………………………………………………………………7 Flag Receptacles 6.3 mm (.250 Series) ………………………………………………………………………………………………………………7 Straight Receptacles 4.8 mm (.
PAGE 4
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Introduction Introduction The Tyco Electronics FASTON Terminals product line includes E-SPRING CONTACT Receptacles, Positive Lock and FASTIN-FASTON Receptacles and Tabs, specifically designed for quick connections. For information on PIDG FASTON, Ultra-Fast, Ultra-Fast Plus and Ultra-Pod fully insulated FASTON terminals, please consult Tyco Electronics Catalogue No.
PAGE 5
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Restriction on the Use of Hazardous Substances (RoHS) Restriction on the Use of Hazardous Substances (RoHS) At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials.
PAGE 6
FASTON Terminals and Connectors FASTON Connection System Catalogue 7-1773445-2 Revised 01-07 Introduction Product Facts ■ Straight, right-angle and receptacle-tab combinations available. ■ Receptacles available for 6.3 - 4.8 - 2.8 mm tab size (.250- .187- .110 Series). ■ Receptacles mate with 0.5 and 0.8 mm thick tabs. ■ Low insertion force (LIF) receptacles available. ■ IEC 60335-1, Glow Wire 750° NO FLAME Housings available. ■ RoHS compliant.
PAGE 7
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTON Connection System Straight Receptacles 6.3 mm (.250 Series) W L E A - Standard Series Style Wire Range (mm2 ) Insulation Diameter (mm) 0.3-0.8 2.3-3.3 0.8 0.5-1.5 2.3-3.3 0.8 1.0-2.5 3.0-4.3 0.8 4.0-6.0 3.81-5.1 0.8 A Dimensions (mm) Material and Finish Tab Thk (mm) W Brass Brass-Tin Plated Ph. Bronze Ph. Bronze-Tin Plated Steel-Nickel Plated Brass Brass-Tin Plated Brass-Silver Plated Ph. Bronze Ph.
PAGE 8
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTON Connection System Straight Receptacles and Tab Combinations 6.3 mm (.250 Series) E L W C Style Wire Range (mm2 ) Insulation Diameter (mm) Tab Thickness (mm) 0.3-0.8 1.5-2.8 0.8 0.8-2.5 3.0-4.3 0.8 Dimensions (mm) Material and Finish Brass Brass-Tin Plated Brass Brass-Tin Plated Ph. Bronze-Tin Plated Steel Nickel Plated C A W L E 7.6 19.6 7.7 7.6 20.1 7.
PAGE 9
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTON Connection System Straight Receptacles 4.8 mm (.187 Series) The Low Insertion Force (LIF) type B receptacle offers lower insertion forces than the other receptacle styles thru the unique design features of a two-stage receptacle and a cantilever mounted locking dimple. Style E W Insulation Diameter (mm) Tab Thickness (mm) 0.5-1.5 2.3-3.3 0.8 1.0-2.5 3.0-4.3 0.8 0.5-1.5 2.3-3.3 0.5 A B 3.0-4.3 0.
PAGE 10
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTON Connection System Straight Receptacles 2.8 mm (.110 Series) W E L A Style A Wire Range (mm2 ) Insulation Diameter (mm) Tab Thickness (mm) 0.05-0.15 0.8-1.3 0.5 0.15-0.35 0.9-1.6 0.3-0.5 1.5-2.5 0.5 0.3-1.0 1.2-2.5 0.8 0.5-1.0 2.0-3.0 0.5-1.
PAGE 11
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTON Connection System Housings & Insulation Sleeves for FASTON Receptacles H 6.3 mm (.250 Series) 4.8 mm (.187 Series) 2.8 mm (.110 Series) W L H A Style Size 2.8 mm Material Polyamide Polyamide Polycarbonate A Polyamide 2.8mm 4.8mm PBT Polyamide Polyethylene Soft Vinyl Chloride B Polyamide 4.
PAGE 12
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTON Connection System Tabs - Stud Mount Type 6.3 mm (.250 Series) Tab Thickness - 0.8 mm T T T B B A B Angle Brass Brass-Tin Brass Brass-Tin Brass-Tin Brass Brass-Tin Brass-Tin Brass 45° 5.25 B C D 30° 5.25 - 4.15 - 4.15 3.15 C D Dimensions (mm) Material and Finish Stud Diameter (mm) 4.
PAGE 13
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTON Connection System Tabs - Stud Mount Type 4.8 mm (.187 Series) W T T Tab Thickness - 0.5 mm E L W L A Style A B B Dimensions (mm) Stud Diameter (mm) Material and Finish W L E T 3.3 3.3 Brass-Tin Plated Brass-Tin Plated 4.8 4.8 7.0 7.3 3.1 6.7 6.7 Part Number 170001-2 170001-3 Tabs - Printed Circuit Board 4.8 mm (.187 Series) W W L L C Style C D Tab Thickness (mm) 0.5 0.8 0.5 0.
PAGE 14
FASTON Terminals and Connectors E-SPRING CONTACT Receptacles Catalogue 7-1773445-2 Revised 01-07 Introduction Product Facts ■ For 6.35 x 0.8 mm tabs Low insertion energy: (1st insertion force 35N. max.). ■ Robust design: 45N. min. (1st extraction) 25N. min. (8th extraction) 20N. min. (10th extraction) ■ Complies with CEI 760/EN61210 / DIN 46249 norms. ■ UL approved. ■ According to VDE 0613 Norm. ■ IEC 60335-1, Glow Wire 750° NO FLAME Housings available. ■ RoHS Compliant.
PAGE 15
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 E-SPRING CONTACT Receptacles Straight Receptacles 6.3 mm (.250 Series) 3.2 16.8 7.8 Wire Range mm2 Insulation Diameter (mm) Tab Thickness (mm) Material and Finish Material Thickness Brass Brass-Tin Plated Brass Brass-Tin Plated Steel-Nickel Plated Brass Brass-Tin Plated Steel-Nickel Plated Part Number 336074-1 336074-3 336075-1 336075-3 336075-5 336076-1 336076-3 336076-5 Straight Housing 6.3 mm (.
PAGE 16
FASTON Terminals and Connectors FASTIN-FASTON Connection System Introduction Product Facts ■ Used for single and multiple connections. ■ Receptacles and tabs available for 6.3, 4.8 and 2.8 mm size (.250 -.187 and .110 Series) ■ Receptacles mate with 0.5 and 0.8 thick tabs. ■ IEC 60335-1, Glow Wire 750° NO FLAME Housings available. ■ RoHS Compliant. Materials and Finish Contacts: Brass, and phosphor bronze base material. Tin and nickel plated products available. Housings: Polyamide UL 94 V2 and UL 94 V0.
PAGE 17
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System Straight Receptacles with Locking Lance for Single & Multiple Connections 6.3 mm (.250 Series) B - With Dimple A -Without Dimple Style A Tab Thickness (mm) Wire Range (mm2 ) Insulation Diameter (mm) 0.3-0.8 2.2-3.2 0.5-1.0 1.4-2.3 0.8 0.5-1.0 B 1.4-2.3 0.8 1.0-2.5 3.1-4.1 1.0-2.5 2.1-3.1 2.5-4.0 3.3-4.5 4.0-6.0 4.0-5.2 Material and Finish Brass Brass-Tin Plated Brass-Tin Plated Ph.
PAGE 18
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System Flag Receptacles with Locking Lance for Multiple Connections 6.3 mm (.250 Series) T W E L C Style Tab Thickness (mm) Wire Range (mm2 ) 0.5-1.0 C 0.8 Insulation Diameter (mm) 1.4-2.3 0.5-1.5 2.0-3.3 2.3-3.3 1.5-2.5 2.5-3.8 Material and Finish Brass-Tin Plated Ph. Bronze Ph. Bronze-Tin Plated Brass-Tin Plated Brass-Tin Plated Brass Brass-Tin Plated Dimensions (mm) W 7.
PAGE 19
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System Tabs with Locking Lance for Single & Multiple Connections 6.3 mm (.250 Series) A - Without Hole Style A B Wire Range (mm2 ) Insulation Diameter (mm) Tab Thickness (mm) 0.3-0.8 1.2-1.8 0.8 0.3-1.0 2.3 max 0.8 0.8-2.5 3.0-4.0 0.8 4.0-6.0 3.4-5.1 0.8 0.3-0.8 2.2-3.2 0.8 0.3-1.0 2.3 max 0.8 0.8-2.5 4.0 max 0.8 1.0-2.5 2.2-3.0 0.8 4.0-6.0 3.4-5.1 0.
PAGE 20
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System Straight Receptacles with Locking Lance for Multiple Connections 4.8 mm (.187 Series) L W Style - Dimensions (mm) Wire Range (mm2 ) Insulation Diameter (mm) Tab Thickness (mm) Material and Finish W L E 0.5-1.5 0.8-2.0 2.3-3.3 2.8-4.0 0.4 0.5 Brass-Tin Plated Brass-Tin Plated 5.6 5.6 19.1 15.0 - Part Number 60435-1 1217150-1 Tabs with Locking Lance for Multiple Connections 4.8 mm (.
PAGE 21
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System Straight Receptacles with Locking Lance for Single & Multiple Connections 2.8 mm (.110 Series) A Style Wire Range (mm2 ) Insulation Diameter (mm) 0.3-0.6 1.3-2.0 0.5-1.0 2.0-3.1 0.05-0.14 0.8-1.3 0.2-2.5 1.0-1.6 0.2-0.5 1.5-2.0 0.3-0.6 1.3-2.0 0.5-1.0 1.4-2.3 3.3 max 0.5-1.5 2.0-3.1 Tab Thickness (mm) W Brass Brass-Tin Plated Brass-Tin Plated Ph. Bronze Ph.
PAGE 22
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System Receptacle and Tab Housings Single Connection 6.3 mm (.250 Series) A - Receptacle Housing Style A B Material Polyamide Polyamide Colour Natural Black Natural Natural Black Natural Black Natural UL 94 V2 V2 V2 V2 V2 V2 V2 V2 B - Tab Housing Dimensions (mm) Note GWT 750° No Flame GWT 750° No Flame W L H 9.9 22.9 6.5 9.9 24.1 6.5 12.5 31.0 9.
PAGE 23
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System Receptacle Housings 2 Positions 6.3 mm (.250 Series) L W H 7.2 I - Receptacle Housing Style I Material Polyamide Colour Natural Dimensions (mm) Note UL 94 V2 - W L H 14.1 18.5 14.0 Part Number 180918-0 Receptacle and Tab Housings 3 Positions 6.3 mm (.
PAGE 24
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System Receptacle and Tab Housings 6 Positions 6.3 mm (.250 Series) M - Receptacle Housing Style M N Material Polyamide Polyamide Colour Natural Black Natural Black Natural Natural Black Natural UL 94 V2 V2 V2 V2 V0 V2 V2 V0 N - Tab Housing Dimensions (mm) Note GWT 750° No Flame GWT 750° No Flame W L H 28.5 24.3 16.8 28.5 24.3 15.4 31.4 32.4 18.
PAGE 25
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System Receptacle and Tab Housings Single Connection 2.8 mm (.110 Series) H W L L H W A - Receptacle Housing Style A B Material Polyamide Polyamide Colour Receptacle and Tab Housings 2 Positions 2.8 mm (.110 Series) Dimensions (mm) Note UL 94 Natural Natural B - Tab Housing - - C Polyamide D Polyamide H 6.0 8.3 18.0 25.4 6.0 8.
PAGE 26
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System - Tab Housings RAST 5 Introduction Product Facts ■ Meets IEC 60335-1, Glow Wire 750° NO FLAME ■ Accepts Tyco Electronics FASTIN-FASTON Tabs 6.3 x 0.8 mm size ■ Mating Tyco Electronics connector families include AMP MONO-SHAPE, AMP multifitting, AMP Standard Timer and Positive Lock RAST 5 Connector System. ■ Available in different keying and locking versions, from 2 to 10 positions.
PAGE 27
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System - Tab Housings RAST 5 Technical Features 1 Locking tongue locks with the keying rib of the counter part (see table) 2 Locking Window locks with locking latches of the counter part (see table) 3 3 Keying groove 2 4 4 Polarisation Groove 1 5 Cover (Secondary Locking) 6 6 Panel Locking A For panel thickness from 0.8 up to 1.0 mm B For panel thickness from 5 1.0 up to 2.2 mm 7 Tabs 6.3 x 0.
PAGE 28
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System - Tab Housings RAST 5 Panel Mount Housings Material: Polyamide Colour: Natural C - with Secondary Locking Positions RAST 5 Polarisations D - without Secondary Locking Panel Cut-Out Style UL 94 Note Part Number A C V2 GWT 750° No Flame 9-927742-2 C V2 - 927742-2 V0 - 5-927742-2 V2 - 5-293035-2 V2 - 964492-2 V0 - 5-964492-2 V2 GWT 750° No Flame 293008-1 V2 - 928230-3 Yell
PAGE 29
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System - Tab Housings RAST 5 Panel Mount Housings (continued) Material: Polyamide Colour: Natural Positions RAST 5 Polarisations Panel Cut-Out Style UL 94 Note Part Number A C V2 - 927742-6 A C V0 - 5-927742-6 D V2 GWT 750° No Flame 5-1241967-6 A C V2 GWT 750° No Flame 293034-1 GWT 750° No Flame 293044-1 A C V2 - 293044-2 - 927742-7 GWT 750° No Flame 284985-1 - 928309-7 GWT 7
PAGE 30
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System - Tab Housings RAST 5 Motor Mount Housings Material: Polyamide Colour: Natural E Positions 7 RAST 5 Polarisations Panel Cut-Out Style UL 94 Note Part Number A C V2 GWT 750° No Flame 293014-1 - E V0 - 293014-3 E V2 GWT 750° No Flame 293015-1 - E V2 GWT 750° No Flame 1-293015-1 V2 GWT 750° No Flame 284861-1 - E V0 - 284861-3 - 2 8 29 All specifications subject to change
PAGE 31
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System - High Temperature Connector Introduction Product Facts ■ Housing for High Temperature: 290°C max. ■ Meets IEC 60335-1 Glow Wire 750° NO FLAME ■ Designed to interconnect with tabs 6.3 x 0.8 mm DIN 46244. ■ Certificate No. 40017093 Reg. No. B650 ■ RoHS Compliant.
PAGE 32
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 FASTIN-FASTON Connection System - High Temperature Connector Straight Receptacle with Locking Lance 6.3 mm (.250 Series) Wire Size (mm2) Insulation Diameter (mm) Material and Finish Part Number 0.8-2.5 2.5-4.3 Steel - Nickel Plated 284340-5 Material UL94 Colour Part Number PPS V0 Black 284674-1 4 Circuit Housing - High Temperature 6.3 mm (.
PAGE 33
FASTON Terminals and Connectors Positive Lock Connection System Catalogue 7-1773445-2 Revised 01-07 Introduction Product Facts ■ Connects onto tabs containing holes. ■ Reduced insertion force. ■ Housing insulates and serves as removal tool. ■ Mechanical "Snap" when receptacles are mated properly. ■ Receptacles mate with 0.8 mm thick tabs. ■ RoHS Compliant. ■ Recognised under the Component Program of Underwriters Lab. Inc., File E28476 (M).
PAGE 34
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Positive Lock Connection System Straight Receptacles Mark I 6.3 mm (.250 Series) Tab Thickness - 0.8 mm 7.4 1 Wire Range (mm2 ) Insulation Diameter (mm) 0.5-1.0 2.0-3.3 0.5-1.0 1.4-2.3 0.5-1.5 2.3-3.3 0.7-2.0 2.4-3.2 1.0-2.5 3.0-4.3 1.0-2.5 2.7-4.0 1.0-2.5 2.1-3.1 2.5-4.0 3.6-4.3 2.5-4.0 3.3-4.7 4.0-6.0 3.4-5.1 22.3 Material and Finish Ph. Bronze Brass-Tin Plated Ph. Bronze-Tin Plated Brass Ph.
PAGE 35
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Positive Lock Connection System 1 Position Straight Housings Mark I 6.3 mm (.250 Series) 5.6 2 Position 17.9 9.8 18.2 7.2 9.0 9.2 24.2 24.3 9.0 10.0 A Material UL 94 V2 V0 Polyamide 1 7.4 15.1 24.
PAGE 36
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Positive Lock Connection System Straight Receptacles Mark II 6.3 mm (.250 Series) Tab Thickness - 0.8 mm 25.8 Max 7.8 7.6 1.40 Wire Range (mm2 ) Insulation Diameter (mm) Material and Finish Part Number 1.5-3.1 2.2-3.4 3.0-5.1 Brass-Tin Plated Brass-Tin Plated Brass-Tin Plated 170327-1 170328-1 170329-1 0.32-0.79 0.79-2.08 2.08-5.27 Further versions available on Catalogue 124962 11.4 10.0 8.3 Straight Housings Mark II 6.3 mm (.
PAGE 37
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Positive Lock Connection System Straight Receptacles Mark II 4.8 mm (.187 Series) 5.6 6.0 21.6 Wire Size (mm2) Insulation Diameter (mm) Tab Thickness (mm) 0.20-0.50 1.5-2.7 0.5 0.50-1.30 1.9-3.4 0.5 Material and Finish Part Number Brass-Tin Plated Ph. Bronze-Nickel Plated Ph. Bronze-Tin Plated Brass-Tin Plated Ph. Bronze-Nickel Plated Ph.
PAGE 38
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Positive Lock Connection System Straight Receptacles Mark II 2.8 mm (.110 Series) 17.2 3.75 Wire Size (mm2) Insulation Diameter (mm) 0.20-0.50 1.02-1.78 0.50-1.30 2.10-3.10 Further versions available on Catalogue 124962 Tab Thickness (mm) Material and Finish Part Number 0.5 Brass-Tin Plated 175411-1 174777-1 0.5 0.6 Straight Housings Mark II 2.8 mm (.110 Series) 5.0 19.0 5.95 Max 20.
PAGE 39
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Positive Lock Connection System Straight Receptacles Mark III 6.3 mm (.250 Series) 19.6 7.6 Wire Size (mm2) Insulation Diameter (mm) Tab Thickness (mm) 0.2-0.5 1.15-2.3 0.8 0.5-1.0 2.0-2.7 0.8 1.0-2.5 2.7-3.7 0.8 Material and Finish Brass Brass-Tin Plated Brass Brass-Tin Plated Brass Brass-Tin Plated Part Number 1380087-1 1380087-2 1380088-1 1380088-2 1380089-1 1380089-2 Straight Housings Mark III 6.3 mm (.
PAGE 40
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Application Tooling Komax Gamma 333 PC Flexible Wire Processing Ultra short conversion times, additional applications and a user-friendly user interface with multiple-language capability. The Komax Gamma 333 PC makes it all possible! With its third processing station and state of the art control software, you are assured maximum flexibility and an even more efficient way of meeting your wire processing needs.
PAGE 41
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Application Tooling AMP 3K/40 and AMP 5K/40 Terminators Based on the field proven AMP-O-LECTRIC Model "G" Terminator, the AMP 3K/40 and AMP 5K/40 Terminators are the latest in a series of machines for wire termination using reeled terminals. The AMP 3K/40 Terminator provides 13 kN (3,000 lb) crimp force and is capable of crimping approx. 2.5 mm2 (14 AWG) wire size.
PAGE 42
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Application Tooling HD-I Applicator with/without Fine Adjustment The new HD-I Applicator (Heavy-Duty Industrial) is developed for use in both Imperial 1 1/8" and 1 5/8") and metric (30 mm and 40 mm) stroke machines.
PAGE 43
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Application Tooling HD-I Applicator with Pneumatic Feed Following requests from our customers, we are now able to offer our popular HD-I Applicators in a version featuring a pneumatic terminal feed mechanism. This offers advantages, whenever the terminal feed is to be accomplished independent of the press stroke, for example in conjunction with very high speed automatic machines or for very fragile contacts.
PAGE 44
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Application Tooling Universal Service & Maintenance Tools and Tool Kit These Hand Tools are ideal for low volume production, prototyping and repair and can help to keep initial investment costs to a minimum. The hand tools are able to crimp a broad spectrum of contacts with wire sizes from 28 to 8 AWG making them most suitable to the service industry.
PAGE 45
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Numerical Index Part Number Page Number Part Number Page Number Part Number Page Number Part Number Page Number Part Number Page Number 100494-2 8 150500-1 9 160759-2 33 170001-3 12 180464-1 7 100495-1 6 150500-2 9 160759-3 33 170037-9 8 180464-2 7 100495-2 6 150545-1 9 160759-4 33 170324-1 36 180464-5 7 100495-4 6 150545-2 9 160762-1 20 170324-2 36 180464-9 7 100570-2 6 150571-2 20 1
PAGE 46
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Numerical Index Part Number Page Number Part Number Page Number Part Number Page Number Part Number Page Number Part Number Page Number 2-180930-5 10 293041-2 18 5-160430-7 8 63646-2 8 927852-6 33 2-180940-0 22 293043-1 28 5-160431-2 8 63674-1 6 927852-7 33 2-180941-0 22 293044-1 28 5-160432-3 6 63961-1 9 927852-8 33 2-336524-3 14 293044-2 28 5-160432-4 6 63963-1 7 927854-1 33 2-626541-0
PAGE 47
FASTON Terminals and Connectors Catalogue 7-1773445-2 Revised 01-07 Global Contacts Americas Argentina – Buenos Aires Phone: +54-1-733-2000 Fax: +54-1-717-0988 Chile – Santiago Phone: +56-2-739-1230 Fax: +56-2-739-1227 Brasil – São Paulo Phone: +55-11-2103-6000 Fax: +55-11-2103-6200 Colombia – Bogota Phone: +57-1-231-9398 Fax: +57-1-240-3769 Canada – Toronto Phone: +905-475-6222 Fax: +905-474-5520 Mexico – Mexico City Phone: +52-5-729-0400 Fax: +52-5-361-8545 United States Harrisburg, PA Phone: +1-
PAGE 48
Tyco Electronics AMP GmBH AMPèrestr. 12-14 • 64625 Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 www.tycoelectronics.