AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Connector Series and Types Series 1—Size 16 Contacts 1 3 4 7 6 11 12 14 Series 1 connectors permit the use of multiple combinations of signal and coaxial circuits in the same housing by accepting durable Multimate contacts. These pin and socket contacts include Type III+ and subminiature coaxial contacts, interchangeable in the same Multimate contact cavity. Type III+ contacts (.062 [1.
AMP Circular Connectors for Commercial Signal and Power Applications Note: All part numbers are RoHS Compliant. Connector Series and Types (Continued) 1 Series 5—Power Contacts .125 POWERBAND 2 Series 5 connectors combine the revolutionary performance of the new AMP POWERBAND Contact, high current contact in configurations similar to the Series 3 connectors. AMP POWERBAND contacts offer the electrical 3 2 1 8 9 3 10 Series 6—Combination, Size 16 and .
Note: All part numbers are RoHS Compliant. AMP Circular Connectors for Commercial Signal and Power Applications Current Carrying Capabilities The total current capacity of each contact in a given connector is dependent upon the heat rise resulting from the combination of electrical loads of the contacts in the connector arrangement and the maximum ambient temperature in which the connector will be operating.
Note: All part numbers are RoHS Compliant. AMP Circular Connectors for Commercial Signal and Power Applications Presentation — An Example* Current Rating ■ First, a base curve showing current levels versus T-rise for a single circuit and the largest wire size (See figure 1). This represents the maximum current capacity of the contact. The curve is usually flat up to 75°C ambient and then drops off.