Information

114-20045
Rev. F4 Page 2 of 6
LOC I
1.1 NOMENCLATURE
Fig. 1
2.0 CRIMPING CONDITIONS
With reference to nomenclature (par.1.1) see Fig. 1, Fig. 2 and Fig. 3.
1. Cut-off tab length 0,3mm max.
2. Front bellmouth 0,10 x 45° max.
Rear bellmouth 0,25 x 60° min.
3. Bend up 5° max.
Bend down 5° max.
Bend right 5° max.
Bend left 5° max.
Rolling 5° max.
4. Cable end protrusion 0,2 to 0,7mm
(brush length)
5. Insulation stripping
length 3,0 to 3,5mm
6. Wire barrel seam must be neatly closed.