Brochure

47
Sealed Circular Plastic Connectors
Multimate Size 16 Contacts
Precision formed signal/low current
Pin Diameter—.062 [1.57]
Test Current—13 amps max.
Specifically designed for
AMP CPC Connectors,
Series 5 and 6, the new
.125 POWERBAND contact
offers the performance of a
MIL-Spec screw machined
Size 8 contact with the
economy of a stamped
and formed, strip-feed
contact. Strip-feed contacts
offer maximum production
capabilities using standard
AMP bench-mount, semi-
automatic termination
equipment. For low volume,
prototype or maintenance
and repair requirements,
the .125 POWERBAND
contact is available in loose
piece form.
.125 POWERBAND
Pin Contact
.125 POWERBAND
Socket Contact
.125 POWERBAND Contacts
Precision formed high current
Pin Diameter—.125 [3.175]
Test Current—50 amps max.
Extraction Tool
Part Number 318813-1
(Instruction Sheet 408-4374)
Material and Finish
Contacts—Copper with beryllium
copper spring
Plating Code
A — Post plated .000200 [0.00508]
min. silver in mating area with .000050
[0.00127] min. silver on remainder of
contact, all over .000050 [0.00127] min.
nickel
B — Post plated .000030 [0.00076]
min. gold in mating area with gold flash
on remainder of contact, all over
.000050 [0.00127] min. nickel
Related Product Data
Application Tooling—Pages 76-79
Technical Documents—Page 80
See pages 17-23 for complete product information and part numbers of Size 16
contacts applicable in Sealed CPC Connectors.
Type III+
Precision Formed Contacts
Type II
Screw-Machined Contacts
.125
[3.18]
Dia.
.400
[10.16]
Standard
Extended
1
.485
[12.32]
.206
[5.23]
Dia.
.206
[5.23]
Dia.
Contact
Strip
Serrations
1
For use in One-Piece or Two-Piece Sealed Circular Plastic Connectors (CPC), Series 5 and 6.
‡Single contact, free-air test current; not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information, page 8.
Note: Standard Size 8, High Current Upgrade Size 8, and .125 POWERBAND contacts are not intermateable.
*A typical 626 Pneumatic Tool System requires: a power unit (
Part No. 189721-2, hand actuated or 189722-2, foot actuated), an adapter
holder (
Part No. 356304-1, with ratchet), and “C” Head adapter Part No. 318161-1.
Contact Part No.
Tooling Part No.
Heavy Duty Miniature (HDM) Die Sets for
Wire Size
Contact Pin
Strip Loose Piece Applicators (for AMP-O-LECTRIC Hand Tool 69710-1
AWG/mm
2
Finish Length
Pin Socket Pin Socket
Model G Machine, or 626 Pneumatic Tool
Base Part No. 354500) System*
A Standard 213845-1 213847-1 213845-3 213847-3
14-12
B Standard 213845-2 213847-2 213845-4 213847-4
680195-3 356612-1
2-3
A Extended
1
213845-5 — 213845-7 —
B Extended
1
213845-6 — 213845-8 —
A Standard 213841-1 213843-1 213841-3 213843-3
10-8
B Standard 213841-2 213843-2 213841-4 213843-4
356611-1 (8 AWG)
5-8
A Extended
1
213841-5 — 213841-7 —
680197-3
356611-2 (10 AWG)
B Extended
1
213841-6 — 213841-8 —
Sealed CPC Connectors
Catalog 82021 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 7-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341
AMP Circular Connectors for
Commercial Signal and Power Applications
Note: All part numbers
are RoHS Compliant.