Datasheet

ManualsBrandsTE CONNECTIVITY ManualsRelaysPCB relays 24 Vdc 16 A 1 maker RT33K024 1 pc(s)

Datasheet Rev. FE1

Issued 2006/05

www.tycoelectronics.com

www.schrackrelays.com

Dimensions are in mm unless

otherwise specified and are

shown for reference purposes

only.

Product specification

according to IEC 61810-1.

Product data, technical para-

meters, test conditions and

processing information

only to be used together

with the 'Definitions' at

schrackrelays.com in the

‘Schrack’ section.

Specifications subject to

change.

General Purpose Relays

Power PCB Relay RT1 Inrush

1 pole 16 A, 1 CO or 1 NO contact

For inrush peak currents up to 80 A

Sensitive coil 400 mW

5 kV / 10 mm coil-contact

Reinforced insulation

Ambient temperature 85°C

RoHS compliant (Directive 2002/95/EC)

as per product date code 0413

Applications

Domestic appliances, heating control, lighting control

F0177-B

Approvals

V REG.-Nr. 6106, Z E214025

Technical data of approved types on request

Contact data

Contact configuration 1 CO or 1 NO

Contact set single contact

Type of interruption micro disconnection

Rated current 16 A

Rated voltage / max.switching voltage AC 240/400 VAC

Limiting continuous current UL: 20 A

Maximum breaking capacity AC 4000 VA

Limiting making capacity, max 4 s, duty factor 10% 30 A

max 20 ms (incandescent lamps) 80 A

Contact material AgNi 90/10, AgSnO

Mechanical endurance > 30 x 10

cycles

Rated frequency of operation with / without load 6 / 1200 min

-1

Contact ratings

Type Load Cycles

RT31K 1000 W incandescent lamp, 250 VAC, NO contact 9x10

RT31L 1000 W incandescent lamp, 250 VAC, NO contact 8x10

RT31K 16 A, 240 VAC, NO contact, 85°C, VDE/UL508 3x10

RT31L 16 A, 240 VAC, NO contact, 85°C, VDE/UL508 5x10

RT31L 21/3.5 A, 230 VAC, compressor, cosϕ=0.5, NO contact 2,3x10

Coil data, DC-coil

Rated coil voltage range DC coil 5...110 VDC

Coil power DC coil typ 400 mW

Operative range 2

Coil insulation system according UL1446 class F

Coil versions, DC-coil

Coil Rated Operate Release Coil Rated coil

code voltage voltage voltage resistance power

VDC VDC VDC c mW

012 12 8.4 1.2 360

10% 400

024 24 16.8 2.4 1440

10% 400

048 48 33.6 4.8 5520+10% 417

060 60 42.0 6.0 8570+12% 420

All figures are given for coil without preenergization, at ambient temperature +23°C

Other coil voltages on request

Summary of content (3 pages)

PAGE 1
General Purpose Relays Power PCB Relay RT1 Inrush I 1 pole 16 A, 1 CO or 1 NO contact I For inrush peak currents up to 80 A I Sensitive coil 400 mW I 5 kV / 10 mm coil-contact I Reinforced insulation I Ambient temperature 85°C I RoHS compliant (Directive 2002/95/EC) as per product date code 0413 Applications F0177-B Domestic appliances, heating control, lighting control Approvals V REG.-Nr.
PAGE 2
General Purpose Relays Power PCB Relay RT1 Inrush (Continued) Coil data, bistable coils Coil power Operative range Limiting voltage, % of rated coil voltage Minimum energization duration Maximum energization duration Coil insulation system according UL1446 1 coil typ 400 mW 2 coils typ 600 mW 2 120% 150% 30 ms 1 min at < 10% DF class F Coil versions, bistable coil Coil Rated Operate Reset Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC c mW bistable, 1 coil A05 5 3.5 3.
PAGE 3
General Purpose Relays Power PCB Relay RT1 Inrush (Continued) PCB layout / terminal assignment Bottom view on solder pins 16 A, 1 CO contact, pinning 5 mm monostable version bistable version a) S0163-CI S0163-BE S0418-CA 16 A, 1 NO contact, pinning 5 mm monostable version bistable version a) S0163-CS S0163-BF S0418-CU a) Indicated contact position during or after coil energization with reset voltage. *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used.