Datasheet

04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
OEG
General Purpose Relays
PCB Relays
n
1pole, 16A, 1 form A(NO) or 1 form C (CO)
n
UL TV-8 (OZT) available
n
Meet 5000V dielectric voltage between coil and contacts
n
Meet 10000V surge voltage between coil and contacts
Typical applications
Home appliances, office machines
Approvals
UL E58304, CSA LR48471, TuV R50139112, CQC 03001007810
Technical data of approved types on request
Contact Data
Contact arrangement 1 form A (NO), 1 form C (CO)
Rated voltage 240VAC
Max. switching voltage 24VDC, 240VAC
Rated current 16A
Switching power 3840VA, 380W
Contact material AgSnO
Min. recommended contact load 100mA, 5VDC
Initial contact resistance 100mΩ at 1A, 6VDC
Frequency of operation, with/without load 1800/18000h
-1
Operate/release time max.
standard version: 15/8ms
sensitive version: 20/8ms
Electrical endurance
NO 16A, 240VAC, resistive, 100x10
3
ops.
NC 8A, 240VAC, resistive, 100x10
3
ops.
Contact ratings 16A, 240VAC/30VDC
Mechanical endurance 10x10
6
operations
Coil Data
Coil voltage range 5 to 48VDC
Coil insulation system according UL class105 (A)
class155 (F)
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
Standard coil, 720mW
05 5 3.5 0.25 36 720
06 6 4.2 0.3 48.5 720
09 9 6.3 0.45 115 720
12 12 8.4 0.6 200 720
24 24 16.8 1.2 820 720
48 48 33.6 2.4 3300 720
Sensitive coil, 540mW
05 5 3.8 0.25 48.5 540
06 6 4.5 0.3 68 540
09 9 6.8 0.45 155 540
12 12 9.0 0.6 270 540
24 24 18.0 1.2 1100 540
48 48 36.0 2.4 4400 540
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Power PCB Relay OZ/OZT
463
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagrams
Outline Dimensions
Operating Voltage
ycnatcepxE efiLemiT etarepO
PC Board Layouts (Bottom View)
Ordering Information
Typical Part Number B OZ -SH -1 24 L M 1 F ,294
1. Basic Series:
OZ = 16A PC Board Terminals OZF = Quick Connect Terminals
OZT = TV-8 Rating PC Board Terminals
2. Enclosure:
S = Vent (Flux-tight)* plastic cover (only available with OZF)
SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
D = Standard (720mW) L = Sensitive (540mW)
6. Contact Arrangement:
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
7. Contact Material:
Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1)
8. Mounting and Termination:
Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P).
9. Insulation System:
Blank = Class A (105 °C) Insulation F= Class F (155 °C) Insulation
10. Suffix:
,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Suffix = Custom mode l
,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF
* Not suitable for immersion cleaning processes.
12
10
8
6
4
2
0.2
0.4
0.6 0.8 1.0 1.2 1.4
Coil Power (W)
Time (msec)
Release Time
Operate Time
-40 -20
Ambient Temp. ( °C)
20
% of Supplying Voltage to Coil
0
20 40 60 80 100
40
60
80
100
120
140
160
0
180
120
140
Operating
Votage Range
Pick-Up Voltage
Cool Coil
Hot Coil Applied
Maximum
Allowable
Coil Voltage
13A
8A
8A
13A/16A
16A
100
Contact Current (A)
Operation (x 10
4
)
10
1
0 2 4 6 8 10 12 14 16 18 20
240VAC Resistiv
e
OZ
OZF
OZ
Note: This data is based on the max. allowable
temperature for E type insulation coil (115 °C).
OZF
OZF
OZ
8 – .059 DIA
(1.5)
.295 ± .012
(7.5 ± .3)
.197 ± .012
(5.0 ± .3)
.197 ± .012
(5.0 ± .3)
.600 ± .012
(15.24 ± .3)
.300 ± .004
(7.6 ± .1)
1.02 ± .008
(26.0 ± .2)
.394 ± .006
(10.0 ± .15)
2 – .059 DIA
(1.5)
2 – .047 DIA
(1.2)
.945 ± .08
(24.0 ± .2)
.300 ± .004
(7.6 ± .1)
.098 ± .004
(2.5 ± .1)
.266 ± .012
(6.75 ± .3)
1.14 ± .02
(29.0 ± .5)
.165 ± .012
(4.2 ± .3)
1.02 ± .02
(26.0 ± .5)
.073
(1.85)
.394 ± .006
(10.0 ± .15)
.394
(10.0)
.047
(1.2)
.047
(1.2)
.047
(1.2)
.024 ± .004
(0.6 ± .1)
.134
(3.4)
.2 ± .002
(.5 ± .05)
.092 ± .012
(2.35 ± .3)
.126
(3.2)
.25
(6.35)
.187
(4.75)
.224
(5.7)
.061 DIA
(1.55)
(Bottom View) (Bottom View) (Top View)
* No electrical connection,
for board attachment only.
*
.024 c
(.60)
.085 ± .012
(2.15 ± .3)
.012
(.3)
.157 ± .012
(4.0 ± .3)
.047
(1.2)
.047
(1.2)
1.15 ± .02
(29.2 ± .5)
.295 ± .012
(7.5 ± .3)
.811 ± .02
(20.6 ± .5)
.504 ± .02
(12.8 ± .5)
.012
(.3)
.012
(.3)
.197 ± .012
(5.0 ± .3)
.197 ± .012
(5.0 ± .3)
.59 ± .012
(15.0 ± .3)
.073 ± .012
(1.85 ± .3)
OZ-SH-105D,294
OZ-SH-112D,294
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
OZ-SH-124D,294
OZ-SH-105LM1,294
OZ-SH-112LM1,294
OZ-SH-124LM1,294
OZ-SH-105L,294
OZ-SH-112L,294
OZ-SH-124L,294
Coil operative rangeOperate time
463
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagrams
Outline Dimensions
Operating Voltage
ycnatcepxE efiLemiT etarepO
PC Board Layouts (Bottom View)
Ordering Information
Typical Part Number B OZ -SH -1 24 L M 1 F ,294
1. Basic Series:
OZ = 16A PC Board Terminals OZF = Quick Connect Terminals
OZT = TV-8 Rating PC Board Terminals
2. Enclosure:
S = Vent (Flux-tight)* plastic cover (only available with OZF)
SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
D = Standard (720mW) L = Sensitive (540mW)
6. Contact Arrangement:
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
7. Contact Material:
Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1)
8. Mounting and Termination:
Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P).
9. Insulation System:
Blank = Class A (105 °C) Insulation F= Class F (155 °C) Insulation
10. Suffix:
,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Suffix = Custom mode l
,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF
* Not suitable for immersion cleaning processes.
12
10
8
6
4
2
0.2
0.4
0.6 0.8 1.0 1.2 1.4
Coil Power (W)
Time (msec)
Release Time
Operate Time
-40 -20
Ambient Temp. ( °C)
20
% of Supplying Voltage to Coil
0
20 40 60 80 100
40
60
80
100
120
140
160
0
180
120
140
Operating
Votage Range
Pick-Up Voltage
Cool Coil
Hot Coil Applied
Maximum
Allowable
Coil Voltage
13A
8A
8A
13A/16A
16A
100
Contact Current (A)
Operation (x 10
4
)
10
1
0 2 4 6 8 10 12 14 16 18 20
240VAC Resistiv
e
OZ
OZF
OZ
Note: This data is based on the max. allowable
temperature for E type insulation coil (115 °C).
OZF
OZF
OZ
8 – .059 DIA
(1.5)
.295 ± .012
(7.5 ± .3)
.197 ± .012
(5.0 ± .3)
.197 ± .012
(5.0 ± .3)
.600 ± .012
(15.24 ± .3)
.300 ± .004
(7.6 ± .1)
1.02 ± .008
(26.0 ± .2)
.394 ± .006
(10.0 ± .15)
2 – .059 DIA
(1.5)
2 – .047 DIA
(1.2)
.945 ± .08
(24.0 ± .2)
.300 ± .004
(7.6 ± .1)
.098 ± .004
(2.5 ± .1)
.266 ± .012
(6.75 ± .3)
1.14 ± .02
(29.0 ± .5)
.165 ± .012
(4.2 ± .3)
1.02 ± .02
(26.0 ± .5)
.073
(1.85)
.394 ± .006
(10.0 ± .15)
.394
(10.0)
.047
(1.2)
.047
(1.2)
.047
(1.2)
.024 ± .004
(0.6 ± .1)
.134
(3.4)
.2 ± .002
(.5 ± .05)
.092 ± .012
(2.35 ± .3)
.126
(3.2)
.25
(6.35)
.187
(4.75)
.224
(5.7)
.061 DIA
(1.55)
(Bottom View) (Bottom View) (Top View)
* No electrical connection,
for board attachment only.
*
.024 c
(.60)
.085 ± .012
(2.15 ± .3)
.012
(.3)
.157 ± .012
(4.0 ± .3)
.047
(1.2)
.047
(1.2)
1.15 ± .02
(29.2 ± .5)
.295 ± .012
(7.5 ± .3)
.811 ± .02
(20.6 ± .5)
.504 ± .02
(12.8 ± .5)
.012
(.3)
.012
(.3)
.197 ± .012
(5.0 ± .3)
.197 ± .012
(5.0 ± .3)
.59 ± .012
(15.0 ± .3)
.073 ± .012
(1.85 ± .3)
OZ-SH-105D,294
OZ-SH-112D,294
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
OZ-SH-124D,294
OZ-SH-105LM1,294
OZ-SH-112LM1,294
OZ-SH-124LM1,294
OZ-SH-105L,294
OZ-SH-112L,294
OZ-SH-124L,294
463
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagrams
Outline Dimensions
Operating Voltage
ycnatcepxE efiLemiT etarepO
PC Board Layouts (Bottom View)
Ordering Information
Typical Part Number B OZ -SH -1 24 L M 1 F ,294
1. Basic Series:
OZ = 16A PC Board Terminals OZF = Quick Connect Terminals
OZT = TV-8 Rating PC Board Terminals
2. Enclosure:
S = Vent (Flux-tight)* plastic cover (only available with OZF)
SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input:
D = Standard (720mW) L = Sensitive (540mW)
6. Contact Arrangement:
Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO
7. Contact Material:
Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1)
8. Mounting and Termination:
Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P).
9. Insulation System:
Blank = Class A (105 °C) Insulation F= Class F (155 °C) Insulation
10. Suffix:
,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Suffix = Custom mode l
,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF
* Not suitable for immersion cleaning processes.
12
10
8
6
4
2
0.2
0.4
0.6 0.8 1.0 1.2 1.4
Coil Power (W)
Time (msec)
Release Time
Operate Time
-40 -20
Ambient Temp. ( °C)
20
% of Supplying Voltage to Coil
0
20 40 60 80 100
40
60
80
100
120
140
160
0
180
120
140
Operating
Votage Range
Pick-Up Voltage
Cool Coil
Hot Coil Applied
Maximum
Allowable
Coil Voltage
13A
8A
8A
13A/16A
16A
100
Contact Current (A)
Operation (x 10
4
)
10
1
0 2 4 6 8 10 12 14 16 18 20
240VAC Resistiv
e
OZ
OZF
OZ
Note: This data is based on the max. allowable
temperature for E type insulation coil (115 °C).
OZF
OZF
OZ
8 – .059 DIA
(1.5)
.295 ± .012
(7.5 ± .3)
.197 ± .012
(5.0 ± .3)
.197 ± .012
(5.0 ± .3)
.600 ± .012
(15.24 ± .3)
.300 ± .004
(7.6 ± .1)
1.02 ± .008
(26.0 ± .2)
.394 ± .006
(10.0 ± .15)
2 – .059 DIA
(1.5)
2 – .047 DIA
(1.2)
.945 ± .08
(24.0 ± .2)
.300 ± .004
(7.6 ± .1)
.098 ± .004
(2.5 ± .1)
.266 ± .012
(6.75 ± .3)
1.14 ± .02
(29.0 ± .5)
.165 ± .012
(4.2 ± .3)
1.02 ± .02
(26.0 ± .5)
.073
(1.85)
.394 ± .006
(10.0 ± .15)
.394
(10.0)
.047
(1.2)
.047
(1.2)
.047
(1.2)
.024 ± .004
(0.6 ± .1)
.134
(3.4)
.2 ± .002
(.5 ± .05)
.092 ± .012
(2.35 ± .3)
.126
(3.2)
.25
(6.35)
.187
(4.75)
.224
(5.7)
.061 DIA
(1.55)
(Bottom View) (Bottom View) (Top View)
* No electrical connection,
for board attachment only.
*
.024 c
(.60)
.085 ± .012
(2.15 ± .3)
.012
(.3)
.157 ± .012
(4.0 ± .3)
.047
(1.2)
.047
(1.2)
1.15 ± .02
(29.2 ± .5)
.295 ± .012
(7.5 ± .3)
.811 ± .02
(20.6 ± .5)
.504 ± .02
(12.8 ± .5)
.012
(.3)
.012
(.3)
.197 ± .012
(5.0 ± .3)
.197 ± .012
(5.0 ± .3)
.59 ± .012
(15.0 ± .3)
.073 ± .012
(1.85 ± .3)
OZ-SH-105D,294
OZ-SH-112D,294
Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.
OZ-SH-124D,294
OZ-SH-105LM1,294
OZ-SH-112LM1,294
OZ-SH-124LM1,294
OZ-SH-105L,294
OZ-SH-112L,294
OZ-SH-124L,294
Electrical endurance
C
t
U