Datasheet

LIGHT-N-LOK Connectors
114-13204
Rev B6 of 7
Tyco Electronics Corporation
Do NOT pull on the wires when unmating the connectors.
3.7. Replacement/Repair
The contacts and housings, are not repairable. DO NOT use damaged or defective contacts or housings. DO NOT
remove the wire and re-terminate contacts.
4. QUALIFICATIONS
LIGHT–N–LOK Connectors are Listed by Underwriters Laboratories Inc. (UL) in File ZMNA.E308110 and
Certified by CSA International for current interruption in File LR 7189, Class 6233–01.
5. TOOLING
Only a wire stripper is needed for the installation of LIGHT–N–LOK Connectors if using customer assembled
connectors. No special tooling is required.
CAUTION
!
CAUTION
!