Datasheet

LIGHT-N-LOK Connectors
114-13207
Rev C 7 of 7
Tyco Electronics Corporation
6. VISUAL AID
Figure 9 shows a typical application of LIGHT–N–LOK Connectors. This illustration should be used by
production personnel to ensure a correctly applied product. Applications which DO NOT appear correct should
be inspected using the information in the preceding pages of this specification and in the instructional material
shipped with the product.
FIGURE 9. VISUAL AID
WIRES MUST BE BOTTOMED
IN CONNECTOR
(CUSTOMER APPLIED)
PLUG AND RECEPTACLE
ASSEMBLIES MUST BE
FULLY MATED
WIRES MUST NOT BE NICKED,
SCRAPED, OR DAMAGED IN
ANY WAY
CONNECTORS
MUST NOT
BE DAMAGED
OPTIONAL TAPE
OR CLAMP MAY
BE APPLIED