RoHS Ready Timer Interconnection System for the Automotive Industry
T E AU TO M OT I V E
T H E 5 A P P L I C AT I O N A R E A S I
I N N OVAT I V E TECHNOLOGIES TE Automotive – a business segment of TE Connectivity – follows the globalization goals of our customers, speeds up the integration of new technologies and enables our customers access to our vast product portfolio and services. TERMINALS & CONNECTORS TE Automotive offers a broad range of high quality terminals and connectors.
SENSORS Contact-less measuring eliminates interference effects, wear and tear, and provides increased reliability. TE Automotive, one of the largest technology providers for the automobile industry, offers contact-less sensors for a variety of applications.
“AT YO U R S E RV I C E ” TE Automotive Online The TE Automotive website is an innovative and interactive source for application information, product updates and technical solutions. Please contact us at: www.te.com/automotive Internet www.te.com www.te.com/automotive www.te.com/automotive/sensors www.te.com/automotive/most Electronic Internet Catalog www.te.com/components www.te.com/automotive www.te.com/automotive/sensors www.te.
“AT YO U R S E RV I C E ” Product and Machine Literature TE Automotive offers a variety of product specific catalogs, brochures and high impact flyers to help better serve you! For more information on literature for TE Automotive, please contact your local organization or go to www.te.com/automotive Product Information Center (PIC) You can rely on TE Connectivity’s PIC Team to provide you support for answers to your general information or technical questions in an efficient and effective manner.
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Quality Guidelines Incorrect Terminal twisted Terminal damaged Cut off tab too long Crimp barrel distorted Crimp height too tight Cut off tab deformed Insulation inside the wire crimp Conductor Brush protruding into terminal body Bellmouth on wrong end Terminal bend INSULATION CRIMP Insulation is pierced and could damage conductor Insulation material is pierced Insulation legs are not closed Insulation is not securely held Legs do
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Quality Guidelines WIRE CRIMP Correct Test Bellmouth must always be present Insulation Present WIRE CRIMP Crimp height measurement Conductor Present Bellmouth Permissible Locking lances and terminal body not deformed Cut off tabs present Correct selection of wire, terminal and applicator Crimp heights and tolerances For crimp height tolerances for any given contact, please refer to the relevant application specification.
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Restriction on the Use of Hazardous Substances (RoHS) Restriction on the Use of Hazardous Substances (RoHS) At TE Connectivity, we’re ready to support your RoHS requirements. We’ve assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials.
Timer Interconnection System Catalog 889759-3 Revised 7-2011 AWG Conversion Table (Average Value) Conversion Tables Most of the wire size ranges are mentioned in mm2, as well as the insulation diameters which are in many cases only in mm’s. We therefore included the conversion tables on page X and page XI. Please note that wire and insulation sizes are for guidance only. Consult the customer drawing for precise detail. FLK/FLR Cable FLK and FLR stand for German DIN (72551) abbreviations.
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Conversion Table – Inch/mm X Inch 0 0.001 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0 0.010 0.020 0.030 0.040 0.050 0.060 0.070 0.080 0.090 0.100 0.0000 0.2540 0.5080 0.7620 1.0160 1.2700 1.5240 1.7780 2.0320 2.2860 2.5400 0.0254 0.2794 0.5334 0.7874 1.0414 1.2954 1.5494 1.8034 2.0574 2.3114 2.5654 0.0508 0.3048 0.5588 0.8128 1.0668 1.3208 1.5748 1.8288 2.0828 2.3368 2.5908 0.0762 0.3302 0.5842 0.8382 1.0922 1.3462 1.
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Conversion Table – Inch/mm (continued) Inch 0 0.001 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.500 0.510 0.520 0.530 0.540 0.550 0.560 0.570 0.580 0.590 0.600 12.7000 12.9540 13.2080 13.4620 13.7160 13.9700 14.2240 14.4780 14.7320 14.9860 15.2400 12.7254 12.9794 13.2334 13.4874 13.7414 13.9954 14.2494 14.5034 14.7574 15.0114 15.2654 12.7508 13.0048 13.2588 13.5128 13.7668 14.0208 14.2748 14.5288 14.7828 15.0368 15.2908 12.
T E AU TO M OT I V E Page Timer Interconnection System 2-10 ✓ Introduction 2-3 ✓ Micro Timer I – Receptacle Contacts 2-4 ✓ Introduction Contact Systems Micro Timer II and Micro Timer III Receptacle Contacts 2-5 – 2-6 Tab Contacts 2-7 – 2-8 Single Wire Seals and Sealing Plugs 2-9 ✓ ✓ ✓ Junior Timer Receptacle Contacts 2-11– 2-12 ✓ Junior Power Timer Receptacle Contacts Tab Contacts Asymmetric 2-13 – 2-15 2-16 Tab Contacts Symmetric 2-17 – 2-18 Tab Contacts Side Feed 2-19 Single Wi
THE PRODUCTS ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ XIII
T E AU TO M OT I V E Page Housings and Connectors Introduction 2-37 ✓ Unsealed Micro Timer II Housings Receptacle Housings 2-38 – 2-39 Tab Housings 2-40 – 2-41 ✓ ✓ Unsealed Junior Timer Housings Receptacle Housings 2-42 – 2-47 ✓ 2-48 – 2-52 ✓ Unsealed Junior Power Timer Housings Receptacle Housings Unsealed Junior Timer and Junior Power Timer Housings Junior Timer and Junior Power Timer Housings – 4 to 22 Positions 2-53 – 2-54 Junior Power Timer Housings – 6 to 21 Positions, Not Waterproof
THE PRODUCTS ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ XV
T E AU TO M OT I V E Page Housings and Connectors Sealed Micro Timer II Housings Receptacle Housings 2-107 – 2-111 Tab Housings 2-112 – 2-214 Receptacle Housings 2-115 – 2-118 ✓ ✓ ✓ Sealed Junior Timer Housings Receptacle Housings 2-119 – 2-124 ✓ 2-125 – 2-133 ✓ 2-134 – 2-138 ✓ 2-139 ✓ 2-140 ✓ 2-141 ✓ 2-142 ✓ 2-143 ✓ 2-144 – 2-145 ✓ Sealed Junior Power Timer Housings Receptacle Housings for Contacts 18.
THE PRODUCTS ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ XVII
T E AU TO M OT I V E Page Housings and Connectors Sealed Junior Power Timer and Micro Timer II Housings Receptacle Housings for Contacts 18.0 mm Length 2-146 ✓ 2-147 ✓ Sealed Junior Power Timer Housings Receptacle Housings for Contacts 18.0 mm Length Sealed Junior Power Timer Housings Receptacle Housings for Contacts 21.0 mm Length 2-148 – 2-167 Tab Housings for Contacts 21.0 mm Length 2-168 – 2-169 ✓ ✓ Sealed Power Timer and Micro Timer II Housings Receptacle Housings for Contacts 21.
THE PRODUCTS ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ XIX
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Engineering Notes XX All specifications subject to change. Consult TE Connectivity for latest specifications.
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Introduction For Decades the Timer Interconnection System has Proven its Reliability in the Automotive Industry The comprehensive range of AMP Timer contacts are extensively used in the automotive industry. Each contact consists of a flat receptacle, which mates with a flat tab. The receptacle has two respective four contact springs, which are independent of each other. Two-piece contacts with a steel top spring are pre-dominantly.
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Engineering Notes 2 All specifications subject to change. Consult TE Connectivity for latest specifications.
Timer Interconnection System Contact Systems Catalog 889759-3 Revised 7-2011 Introduction The receptacle contact has two, respective four contact springs, which are independent of each other and a steel top spring. All Timer contacts can be combined in one connector, same secondary locking device. Independent of both, watertight and non-watertight connectors, tabs and receptacle can be applied.
Timer Contact System Micro Timer I Catalog 889759-3 Revised 7-2011 Receptacle Contacts Technical Features Contact Material: CuSn, CuFe Cantilever Spring: Stainless Steel Contact Finish: pre-tin plated, gold plated 2.4 Wire Size Range: 0.2–1.5 mm2 FLR (thin walled wire) 18.7 Contact Resistance (New State): CuSn: < 5 m CuFe: <4 m Total Temperature max.: –40 °C to +120 °C (tin plated) –40 °C to +140 °C (gold plated) 2.4 Mating Cycles: 10 (tin plated) 100 (gold plated) Insertion Force✱: max.
Timer Contact System Micro Timer II and Micro Timer III ✱✱ Catalog 889759-3 Revised 7-2011 Receptacle Contacts Technical Features Receptacle Contact Contact Material: CuSn, CuFe, CuNiSi Cantilever Spring: Stainless Steel 19.0 Contact Finish: pre-tin plated, gold plated 5.7 0.32 Wire Size Range: 0.2–0.5 mm2 (FLR) 0.5–1.0 mm2 (FLR) 1.5 mm2 (FLR) 1.2 0.4 Spring 1 Contact Resistance (New State): CuSn: < 5 m CuFe: < 4 m Total Temperature max.
Timer Contact System Micro Timer II and Micro Timer III Catalog 889759-3 Revised 7-2011 Receptacle Contacts (continued) Standard Receptacle Contacts Wire Size Range (mm2 ) 0.2–0.5 0.5–1.0 Insulation Diameter (mm) FLK FLR – 1.15–1.60 – 1.4–2.
Timer Contact System Micro Timer II and Micro Timer III Catalog 889759-3 Revised 7-2011 Tab Contacts Tabs 1.6 x 0.6 mm with Steel Top Spring, Mates with Micro Timer II 22.4 5.7 0.32 1.6 Extraction Tool: Part No. 539960-1 Product Specification: 108-18331 0.4 Spring 1 Application Specification: 114-18082 1.2 0.6 8.0 5.7 Standard Tab Contacts Wire Size Range (mm2 ) 0.2–0.5 0.5–1.0 Insulation Diameter (mm) FLK FLR – 1.15–1.60 – 1.4–2.
Timer Contact System Micro Timer II and Micro Timer III Catalog 889759-3 Revised 7-2011 Tab Contacts Tabs 1.6 x 0.6 mm with Modified Steel Top Spring, Mates with Micro Timer II 22.4 5.7 0.32 1.6 Extraction Tool: Part No. 539960-1 0.6 Spring 2 Product Group Drawing: 1355055 Product Specification: 108-18331 Application Specification: 114-18082 0.8 0.6 5.7 8.0 Standard Tab Contacts with Modified Spring Wire Size Range (mm2 ) 0.2–0.5 0.5–1.0 1.5 Insulation Diameter (mm) FLK FLR – 1.15–1.
Timer Contact System Micro Timer II and Micro Timer III Catalog 889759-3 Revised 7-2011 Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for Micro Timer II; Micro Timer III and 1.6 mm Tabs 2.6 3.9 4.3 7.8 Insulation Diameter (mm) Color Part Number Package Quantity 0.35–0.50 Blue 1394133-12 10,000 0.9–1.2 Green 1718705-10 10,000 1.2–1.6 Red 964971-1 10,000 1.4–1.9 Gray 963530-1 10,000 1.9–2.
Timer Contact System Catalog 889759-3 Revised 7-2011 Engineering Notes 10 All specifications subject to change. Consult TE Connectivity for latest specifications.
Timer Contact System Junior Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts Technical Features Wire Size Range: 0.12–2.5 mm2 (suitable for insulation-reduced stranded wires) 5.0 5.0 Current Carrying Capacity: up to approx. 20 A Insertion Force✱: approx. 8 N 3.1 Extraction Force✱: approx. 6 N Contact Material: CuZn or CuSn Contact Finishes: plain, tin plated, silver plated or gold plated. Special materials and finishes on request. 4.1 2.
Timer Contact System Junior Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts (continued) Junior Timer Receptacle Contacts Wire Size Range (mm2 ) Insulation Diameter (mm) FLK Part Numbers Material and Finish ✱ FLR Strip Form Package Quantity LoosePiece Package Quantity ◆ Applicator ◆ 0.12–0.25 0.9–1.4 – -1 4) / -2 5) 926755 5,000 926756 500 1528556 0.5–1.0 2.0–2.7 – -1 / -2 1) / -3 / -4 927863 4,000 927864 500 1426120 0.5–1.5 2.0–3.
Timer Contact System Junior Power Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts Technical Features Receptacle Contact Contact Material: CuSn, CuFe, CuNiSi Cantilever Spring: Stainless Steel Contact Finish: – tin plated – silver plated – selective gold plated 18.8 – 21.0 2.4 4.15 0.32 Wire Size Range: 0.2–2.5 mm2 FLK and FLR Contact Resistance (New State): CuFe: <2 m CuSn: <3 m Total Temperature max.
Timer Contact System Junior Power Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts (continued) Standard Receptacle Contacts (Length 18.8 mm) Wire Size Range (mm2 ) Insulation Diameter (mm) FLK FLR 1.15–2.30 – Part Numbers Material and Finish ✱ -1 / -3 / 1-xxx-1 0.22–0.50 0.5–1.0 2.0–2.
Timer Contact System Junior Power Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts (continued) Receptacle Contacts with Single Wire Sealing System (Length 21.0 mm) Wire Size Range (mm2 ) Insulation Diameter (mm) Part Numbers Material and Finish ✱ Strip Form Package Quantity LoosePiece Package Quantity ◆ Applicator ◆ -1 / -3 / -6 / 1-xxx-1 / 2-xxx-1 929941 3,750 929942 500 1528027 – -1 / -3 / -6 / 1-xxx-1 / 2-xxx-1 929939 3,750 929940 500 1528006 2.7-3.
Timer Contact System Junior Power Timer Catalog 889759-3 Revised 7-2011 Tab Contacts Asymmetric Tabs 2.8 x 0.8 mm with Asymmetric Steel Top Spring, Mates with Junior Power Timer 7.9 3.0 0.8 0.38 Extraction Tool: Part No. 2-1579007-5 Product Specification: 108-18063 Application Specification: 114-18051 2.8 4.0 9.5 5.5 Standard Tab Contacts Wire Size Range (mm2 ) Part Numbers Insulation Diameter (mm) Material and Finish ✱ FLK FLR 0.2–0.5 – 1.1–1.6 0.5–1.0 – 1.4–2.1 1.5–2.5 – 2.2–3.
Timer Contact System Junior Power Timer Catalog 889759-3 Revised 7-2011 Tab Contacts Symmetric Tabs 2.8 x 0.8 mm with Steel Top Spring, Mates with Junior Power Timer 25.5 – 28.6 0.32 2.8 Extraction Tool: Part No. 1-1579007-6 0.85 Product Group Drawing: 1355052 Product Specification: 108-18063 6.0 9.5 0.8 Application Specification: 114-18051 1.
Timer Contact System Junior Power Timer Catalog 889759-3 Revised 7-2011 Tab Contacts Symmetric Tabs 2.8 x 0.8 mm with Modified Steel Top Spring, Mates with Junior Power Timer 24.2 – 25.0 0.32 2.8 Extraction Tool: Part No. 1-1579007-6 Product Group Drawing: 1355364 0.85 Product Specification: 108-18063 6.0 9.5 Application Specification: 114-18051 0.8 0.
Timer Contact System Junior Power Timer Catalog 889759-3 Revised 7-2011 Tab Contacts Side Feed Tabs 2.8 x 0.8 mm Side Feed, Mates with Junior Power Timer 8.5 Contact Material: CuZn, CuSn, CuNiSi 2.8 Contact Finish: plain, pre-tin plated, silver plated, gold plated Wire Size Range: 0.2–3.0 mm2 (FLR) 22.0 0.8 Extraction Tool: Part No. 725864-1 Part No. 1-1579007-4 Product Group Drawing: 1670467 Product Specification: 108-18299 Application Specification: 114-18014 Tab Contacts Wire Size Range (mm2 ) 0.
Timer Contact System Junior Power Timer Catalog 889759-3 Revised 7-2011 Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for Junior Power Timer and 2.8 mm Tabs (Two Cavity Diameters) 4.3 3.4 A 7.8 Cavity Size Function Relevant Insulation Diameter (mm) A 1.2–2.1 冸 冹 Example for Wire Size, FLR Insulation according ISO 6722 (mm2 ) Color Diameter A (mm) (0.35–1.00) Blue 5.6 Part Number Package Quantity 828904-1 1,000 828904-2 10,000 10,000 A 2.2–3.0 (1.5–2.
Timer Contact System Junior Power Timer Catalog 889759-3 Revised 7-2011 Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for Junior Power Timer and 2.8 mm Tabs (Cavity Diameter 5.2 mm) 5.65 3.4 4.3 7.8 Wire Size Range (mm2 ) FLK FLR Insulation Diameter (mm) 0.35 0.35–1.00 1.2–2.1 Blue 963294-1 5,000 0.5–1.0 1.5 2.0–2.7 Red-Brown 963293-1 5,000 1.5 2.5 2.7–3.
Timer Contact System Standard Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts Technical Features Standard Timer Temperature Range: –40 °C to +110 °C Modified (Two Locking Lances) Current Carrying Capacity: 25 A max. (see Product Spec. 108-18054) Wire Size Range: 0.2–2.5 mm2 (suitable for insulation-reduced stranded wires) Insulation Diameter: 1.0–4.3 mm Contact Material: CuZn, CuSn, CuFe, CuNiSi. Additional materials and finishes on request.
Timer Contact System Standard Power Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts Technical Features Receptacle Contact Contact Material: CuSn, CuFe, CuNiSi, Cantilever Spring: Stainless Steel 19.5 – 20.0 Contact Finish: tin plated, silver plated, selective gold plated 6.85 4.8 Contact Resistance (New State): 2 m 0.4 0.4 Total Temperature max.: –40 °C to +130 °C (tin plated) –40 °C to +140 °C (silver plated) –40 °C to +150 °C (gold plated) min. 0.
Timer Contact System Standard Power Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts (continued) Standard Receptacle Contacts Wire Size Range (mm2 ) 0.2–0.5 0.5–1.0 Insulation Diameter (mm) FLK FLR 1.15–2.30 – 2.0–2.
Timer Contact System Standard Power Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts (continued) Standard Receptacle Contacts with Modified Spring Wire Size Range (mm2 ) Insulation Diameter (mm) Part Numbers Material and Finish ✱ Strip Form Package Quantity LoosePiece Package Quantity ◆ Applicator ◆ -1 964322 2,300 964321 500 1530002 -1 964324 2,300 964323 500 1528206 2.2–3.0 -1 / -5 964326 2,300 964325 500 1528095 3.4–4.
Timer Contact System Standard Power Timer Catalog 889759-3 Revised 7-2011 Tab Contacts Asymmetric Tabs 4.8 x 0.8 mm with Asymmetric Steel Top Spring, Mates with Standard Power Timer 26.9 0.8 0.38 Extraction Tool: Part No. 2-1579007-5 Product Specification: 108-18064 Application Specification: 114-18052 4.8 9.5 5.
Timer Contact System Standard Power Timer Catalog 889759-3 Revised 7-2011 Tab Contacts Symmetric Tabs 5.8 x 0.8 mm with Steel Top Spring, Mates with Standard Power Timer 26.5 – 30.5 0.38 5.8 Extraction Tool: Part No. 1-1579007-6 Product Group Drawing: 1241895 1.4 Product Specification: 108-18064 9.5 6.0 0.8 Application Specification: 114-18052 1.
Timer Contact System Standard Power Timer Catalog 889759-3 Revised 7-2011 Tab Contacts Symmetric Tabs 5.8 x 0.8 mm with Modified Steel Top Spring, Mates with Standard Power Timer 25.2 – 27.2 5.8 0.38 Extraction Tool: Part No. 1-1579007-6 1.6 Product Group Drawing: 1394011 Product Specification: 108-18064 6.0 9.5 Application Specification: 114-18052 0.8 1.
Timer Contact System Standard Power Timer Catalog 889759-3 Revised 7-2011 Tab Contacts Side Feed Tabs 6.3 x 0.8 mm Side Feed, according to DIN 46343, Mates with Standard Power Timer 0.8 Extraction Tool: Part No. 1-1579007-4 6.3 1.0 15.8 28.0 Tab Contacts Side Feed Wire Size Range (mm2 ) Insulation Diameter (mm) FLK FLR 0.2–0.5 – 1.15–1.60 0.5–1.0 – 1.4–2.1 > 1.0–2.5 > – 2.2–3.0 > 2.5–4.0 > – 3.3–4.
Timer Contact System Standard Power Timer Catalog 889759-3 Revised 7-2011 Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for Standard Power Timer and 5.8 mm (4.8 mm) Tabs (Cavity Diameter see below) 6.0 A 8.5 Insulation Diameter (mm) Diameter A (mm) Color Part Number Package Quantity 1.4–2.1 Blue 8.2 963243-1 2,500 2.2–3.0 White 8.2 963244-1 2,500 3.4–3.7 Yellow 8.2 963245-1 2,500 Sealing Plug Black 8.
Timer Contact System Standard Power Timer Catalog 889759-3 Revised 7-2011 Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for Standard Power Timer and 5.8 mm (4.8 mm) Tabs (Cavity Diameter 8.5 mm) 6.0 9.0 4.3 8.0 Insulation Diameter (mm) Color Part Number Package Quantity 2.0–2.7 White 1394511-1 10,000 3.4–3.7 Blue 1394512-1 10,000 4.0–4.
Timer Contact System Catalog 889759-3 Revised 7-2011 Engineering Notes 32 All specifications subject to change. Consult TE Connectivity for latest specifications.
Timer Contact System Maxi Power Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts Technical Features Contact Material: CuNiSi, Cantilever Spring: Stainless Steel 37.5 / 41.0 Contact Finish: pre-tin plated Wire Size Range: > 2.5–4.0 mm2 > 4.0–6.0 mm2 > 6.0–10.0 mm2 11.2 7.85 0.65 Contact Resistance (New State): < 0.3 m 2.7 Total Temperature max.: –40 °C to +130 °C (tin plated) Mating Cycles: 10 (tin plated) Retention Force: – from housings without second locking device min.
Timer Contact System Maxi Power Timer Catalog 889759-3 Revised 7-2011 Receptacle Contacts (continued) Standard Receptacle Contacts (Tab 9.5 x 1.2 mm) Wire Size Range (mm2 ) Insulation Diameter (mm) Part Numbers Material and Finish ✱ Strip Form Package Quantity LoosePiece Package Quantity ◆ Applicator ◆ Hand Tool -1 962928 600 962929 500 1855533 734531-1 -1 / 1-xxx-6 962930 600 962931 500 1855531 734532-1 962932 600 962933 500 1855534 734533-1 FLK FLR > 2.5–4.0 > 3.3–4.
Timer Contact System Maxi Power Timer Catalog 889759-3 Revised 7-2011 Tab Contacts Tabs 9.5 x 1.2 mm with Steel Top Spring, Mates with Maxi Power Timer 45.5 – 49.0 11.3 0.58 9.5 Modular Dimensions 2.6 Standard Version: min. 11.0 mm x 12.5 mm Modular Dimensions with Single Wire Sealing System: 16.0mm x 16.0mm / 14.0mm x 16.0 mm 1.2 Extraction Tool: Part No. 1-1579007-7 Application Specification: 114-18076 18.0 11.
Timer Contact System Maxi Power Timer Catalog 889759-3 Revised 7-2011 Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for Maxi Power Timer Contact and 9.5 mm Tab 15.6 7.8 10.0 3.8 16.2 Insulation Diameter (mm) Color Part Number Package Quantity 4.7–5.3 Light-Blue 1355307-1 4,000 16.5 17.5 A 10.5 36 Insulation Diameter (mm) Color Part Number Package Quantity 4.6–5.2 Violet 1355437-1 4,000 5.8–6.6 Blue 1355437-2 4,000 7.1–8.
Timer Interconnection System Housings and Connectors Catalog 889759-3 Revised 7-2011 Introduction Receptacle and tab housings are available for different applications. Free hanging coupling or group connection. These housings are available up to 100 contacts. The speciality of the Timer housings is that they are suitable for high position connections up to 100 positions. Impassivity to Angular Contacting α up to 5° β up to 15° In such high position connectors a lever is uesed to provide easy mating.
Timer Housings and Connectors Unsealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 2 Position Type A 11.6 Housing Material: PBT GF20 7.2 4.6 Wire Size Range: 0.35 – 1.5 mm2 3.5 Product Specification: 108-94118 Application Specification: 114-18901 22.5 7.8 2 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 3 Position Type A 15.88 Housing Material: PA66 Wire Size Range: 0.35– 1.5 mm2 Product Specification: 108-18822 4.6 Application Specification: 114-18515 3.5 22.9 13.23 3 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 2 Positions 9.6 Housing Material: PBT GF20 6.4 Wire Size Range: 0.35– 0.75 mm2 6.3 4.6 3.5 Product Specification: –– 13.0 7.8 Application Specification: –– 30.5 2 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 3 Positions 11.3 Housing Material: PBT GF20 4.75 Wire Size Range: 0.3–0.75 mm2 4.6 6.4 3.5 17.5 17.1 Product Specification: –– Application Specification: –– 11.6 30.5 3 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 12 Positions 34.7 Housing Material: PA66 GF13 12.1 16.3 Wire Size Range: See customer drawing Product Specification: –– 10.5 5.0 Application Specification: –– 44.5 16.2 12 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 16 Positions 3.0 Housing Material: PA66 GV13 16.3 Wire Size Range: See customer drawing 12.4 Product Specification: –– 5.0 Application Specification: –– 50.45 10.0 44.6 16 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 25 Positions 22.0 76.0 Housing Material: PA66 GV13 11.7 11.7 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 73.0 66.8 67.0 25 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 35 Positions 18.0 Housing Material: PA66 GV30 39.0 Wire Size Range: See customer drawing 25.0 118.5 Product Specification: –– Application Specification: –– 10.0 149.5 35 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 35 Positions 149.5 29.0 Housing Material: PA66 GV30 39.0 Wire Size Range: See customer drawing Product Specification: –– 21.0 25.0 Application Specification: –– 114.0 5.0 5.0 35 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 35 Positions 2.5 5.0 Housing Material: PA66 GV13 16.3 Wire Size Range: See customer drawing 12.4 5.0 Product Specification: –– Application Specification: –– 124.0 22.0 91.5 35 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 15 Positions 37.2 Housing Material: PA66 GV13 11.7 Wire Size Range: See customer drawing 6.9 Product Specification: 108-18053 22.0 5.0 Application Specification: 114-18079 47.2 42.2 15 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 25 Positions Housing Material: PA66 GV13 7.9 11.7 Wire Size Range: See customer drawing 5.0 Product Specification: –– Application Specification: –– 67.0 7.5 25 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 25 Positions Housing Material: PA66 GV13 11.7 Wire Size Range: See customer drawing 7.9 5.0 Product Specification: –– Application Specification: –– 67.0 7.5 25 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 35 Positions 178.5 31.0 Housing Material: PA66 GV30 Wire Size Range: See customer drawing 41.0 Product Specification: –– 25.0 118.5 Application Specification: –– 2.5 19.8 5.0 5.0 35 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 39 Positions 4 x Junior Power Timer 35 x Micro Timer II Housing Material: PA66 GV30 Wire Size Range: See customer drawing 16.2 4.5 16.5 88.0 Product Specification: –– Application Specification: –– 51.0 5.0 3.0 5.0 2.5 48.0 39 Position Mixed Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Timer & Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Junior Timer and Junior Power Timer Housings – 4 to 22 Positions These unsealed Timer Housings are a complete family group. They are available in wire-to-wire as well as wire-to-pc board, rightangle and vertical applications. The tab housings are designed to lock into mounting collar. No. of Pos. 4 6 8 10 14 18 22 2 3 4 6 8 10 Junior Timer or Junior Power Timer Housings 23.
Timer Housings and Connectors Unsealed Junior Timer & Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle and Tab Housings – 4 to 22 Positions Technical Features 29.5 No. of Positions: 4–22 Positions 7.0 16.0 11.6 Housing Material: PBT-VO-reinforced 5.0 Wire Size Range: Max. 2.5 mm2 18.5 Product Specification: –– Application Specification: –– 11.0 66.85 13.8 22.4 5.0 26.0 4 – 22 Position Receptacle and Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Junior Power Timer Housings – 6 to 21 Positions, Not Waterproof Shown: 18 Position Connection No. of Pos. 6 n 1 9 12 15 18 21 2 3 4 5 6 27.5 n x 5 + 6.2 5.0 n x 5 + 12.5 35.5 Tab Housing 18.2 23.0 23.0 n x 5 + 6.2 Junior Power Timer Housing 5.5 23.0 1 Secondary Locking Feature (same for Junior Power Timer and Tab Housing). Optional but recommended use. n x 5 + 15.0 3.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle and Tab Housings Technical Features 26.5 No. of Positions: 6 Positions Housing Material: PBT GF10 27.4 Wire Size Range: Max. 2.5 mm2 5.5 Product Specification: –– 5.0 Application Specification: –– 14.8 17.5 5.5 32.05 29.0 17.6 5.0 18.1 35.5 6 Position Unsealed Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle and Tab Housings Technical Features 10.0 No. of Positions: 9 Positions Housing Material: PBT GF10 27.4 Wire Size Range: Max. 2.5 mm2 11.0 5.5 Product Specification: –– 5.0 Application Specification: –– 23.0 19.8 26.5 17.7 10.0 11.0 32.1 17.6 5.5 5.0 18.1 22.5 35.5 22.5 9 Position Unsealed Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle and Tab Housings Technical Features 15.0 No. of Positions: 12 Positions Housing Material: PBT GF10 27.4 Wire Size Range: Max. 2.5 mm2 11.0 5.5 Product Specification: –– 23.0 5.0 Application Specification: –– 24.8 26.5 22.7 15.0 32.1 17.6 11.0 5.5 5.0 18.1 22.7 35.5 27.5 12 Position Unsealed Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle and Tab Housings Technical Features 26.2 No. of Positions: 15 Positions Housing Material: PBT GF10 27.4 Wire Size Range: Max. 2.5 mm2 Product Specification: –– 5.0 Application Specification: –– 26.5 29.8 26.2 32.05 35.5 17.4 5.5 5.0 32.5 15 Position Unsealed Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle and Tab Housings Technical Features No. of Positions: 18 Positions 31.2 Housing Material: PBT GF10 27.4 Wire Size Range: Max. 2.5 mm2 5.5 Product Specification: –– 5.0 Application Specification: –– 34.8 26.5 32.05 31.2 35.5 17.4 5.5 37.5 5.0 18 Position Unsealed Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle and Tab Housings Technical Features No. of Positions: 21 Positions 26.5 36.2 Housing Material: PBT GF10 27.4 Wire Size Range: Max. 2.5 mm2 5.5 Product Specification: –– Application Specification: –– 5.0 39.8 42.5 26.5 32.05 5.0 36.2 35.5 21 Position Unsealed Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Maxi Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features 23.9 No. of Positions: 2 Positions Housing Material: PA66 GF30 27.1 Wire Size Range: 4.0–10.0 mm2 Product Specification: –– 11.5 41.4 Application Specification: –– 51.5 2 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Maxi Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 2 Positions 19.74 43.64 Housing Material: PA66 Wire Size Range: 2.5–10.0 mm2 20.94 Product Specification: 108-18538-1 Application Specification: 114-18185-1 55.82 2 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Maxi Power Timer Housings Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 2 Positions 34.3 Housing Material: PA66 GF30 22.6 25.75 Wire Size Range: 2.5–10.0 mm2 Product Specification: –– 11.5 Application Specification: –– 56.5 24.7 66.5 2 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 12 Positions 20.0 42.8 Housing Material: PA66 GV13 17.7 3.5 Product Specification: –– Application Specification: –– 5.0 5.0 43.8 28.0 15.5 37.8 12 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 15 Positions 45.3 25.5 Housing Material: PA66 GV13 Product Specification: –– Application Specification: –– 51.3 10.5 17.5 15 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 15 Positions 17.5 Housing Material: PA66 GV13 17.7 15.0 Product Specification: –– Application Specification: –– 5.0 25.5 51.3 45.3 15 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 25 Positions 11.7 Housing Material: PA66 GV13 24.0 17.7 Product Specification: –– Application Specification: –– 5.0 26.7 82.9 88.9 25 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 25 Positions 18.5 82.9 Housing Material: PA66 GV13 5.0 3.5 15.0 Product Specification: –– Application Specification: –– 5.0 88.9 25.5 25 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 25 Positions 17.3 82.9 Housing Material: PA66 GV13 Product Specification: –– 15.0 3.5 Application Specification: –– 5.0 88.9 10.5 25 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 25 Positions Housing Material: PA66 GV13 15.0 Product Specification: –– Application Specification: –– 5.0 12.5 8.0 96.0 71.8 25 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 25 Positions 27.8 Housing Material: PA66 GV13 15.0 Product Specification: –– Application Specification: –– 5.0 8.0 96.0 8.0 71.8 25 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 25 Positions 12.0 Housing Material: PA66 GV13 15.0 17.7 Product Specification: –– Application Specification: –– 5.0 90.0 13.6 25 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 25 Positions 96.0 Housing Material: PA66 GV13 Product Specification: –– 3.5 Application Specification: –– 5.0 14.0 8.0 8.0 71.8 25 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 35 Positions 97.1 Housing Material: PA66 GV13 17.3 Product Specification: –– 3.5 15.0 Application Specification: –– 5.0 114.0 10.5 35 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 35 Positions 114.0 17.3 Housing Material: PA66 GV13 Product Specification: –– 15.0 Application Specification: –– 21.9 5.0 10.5 97.1 35 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 35 Positions 18.8 Housing Material: PA66 GV13 15.0 Product Specification: –– 17.7 12.0 5.0 Application Specification: –– 115.0 116.0 35 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 35 Positions 115.0 12.0 Housing Material: PA66 GV13 Product Specification: –– 15.0 Application Specification: –– 27.0 103.0 35 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 39 Positions 27.0 3.0 5.0 Housing Material: PA66 GV13 17.6 Product Specification: –– 3.5 Application Specification: –– 91.0 90.0 39 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 39 Positions 3.0 5.0 27.0 Housing Material: PA66 GV35 Product Specification: –– 28.8 25.3 Application Specification: –– 91.0 90.0 39 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 39 Positions 3.0 5.0 27.0 Housing Material: PA66 GV35 Product Specification: –– 25.3 Application Specification: –– 91.0 90.0 39 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 39 Positions 22.8 3.0 5.0 Housing Material: PA66 GV13 15.0 Product Specification: –– 25.3 Application Specification: –– 91.0 90.0 39 Position PCB Header Double Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 55 Positions 58.0 5.0 Housing Material: PA66 GV35 35.3 Product Specification: –– Application Specification: –– 37.7 137.0 58.0 55 Position PCB Header Double and Triple Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 55 Positions 2.5 Housing Material: PA66 GF20 32.0 10.0 Product Specification: –– Application Specification: –– 5.0 103.0 26.4 138.5 55 Position PCB Header Double and Triple Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed PCB Headers Catalog 889759-3 Revised 7-2011 Printed Circuit Board Headers Technical Features No. of Positions: 55 Positions 5.0 5.0 5.0 Housing Material: PA66 GF20 25.6 Product Specification: –– Application Specification: –– 113.85 34.0 55 Position PCB Header Double and Triple Row Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 8 Position Type A 25.0 23.0 Housing Material: PBT Wire Size Range: 0.2–2.5 mm2 11.0 12.6 Product Specification: –– Application Specification: –– 22.0 8 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 8 Position Type A with Secondary Locking 23.0 25.0 Housing Material: PBT Wire Size Range: 0.2–2.5 mm2 12.6 11.0 Product Specification: –– Application Specification: –– 22.0 8 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 8 Position Type A with Different Clips 36.5 Housing Material: PA66 11.0 12.6 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 23.0 Application Specification: –– 20.0 25.0 8 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 8 Position Type B 36.5 Housing Material: PA66 11.0 Wire Size Range: 0.2–2.5 mm2 12.6 Product Specification: –– 23.0 Application Specification: –– 22.0 25.0 8 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 8 Position Type B with Secondary Locking 36.5 Housing Material: PA66 11.0 12.6 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 23.0 Application Specification: –– 22.0 25.0 8 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 8 Position Type B with Differents Clips 36.5 Housing Material: PA66 11.0 12.6 Wire Size Range: 0.2–2.5 mm2 23.0 Product Specification: –– Application Specification: –– 22.0 25.0 8 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 8 Position Type C 36.5 Housing Material: PA66 11.0 Wire Size Range: 0.2–2.5 mm2 12.6 Product Specification: –– 23.0 Application Specification: –– 22.0 25.0 8 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 10 Position Type C with Secondary Locking 42.5 Housing Material: PA66 11.0 12.6 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 23.0 Application Specification: –– 22.0 31.0 10 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 10 Position Type B with Differents Clips 31.0 Housing Material: PA66 11.0 5.0 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 6.0 Application Specification: –– 2.0 23.0 10 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 8 Position Type A + B 32.5 Housing Material: PBT 14.4 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 15.2 6.0 Application Specification: –– 28.0 35.0 8 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Car Radio acc. to ISO-TC22/WG 5 Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 10 Position Type C 38.5 Housing Material: PBT 14.4 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 15.2 6.0 Application Specification: –– 34.0 35.0 10 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 2 Position Junior Power Timer 21.5 Housing Material: PA66 4.8 Wire Size Range: 0.2–2.5 mm2 6.2 Product Specification: –– Application Specification: –– 22.5 13.4 11.5 2 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 4 Position Junior Power Timer 11.5 Housing Material: PA66 12.6 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 22.5 6.2 Application Specification: –– 19.6 1.0 4 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 6 Position Junior Power Timer 2.0 Housing Material: PA66 12.6 4.8 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 22.5 6.2 Application Specification: –– 25.8 11.5 6 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 8 Position Junior Power Timer 2.0 Housing Material: PA66 4.8 Wire Size Range: 0.2–2.5 mm2 22.5 6.2 Product Specification: –– Application Specification: –– 32.0 11.5 8 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 14 Position Junior Power Timer 24.0 Housing Material: PA66 3.4 9.2 5.8 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 6.2 22.5 9.1 40.1 Application Specification: –– 14 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 2 Position Junior Power Timer 20.0 11.4 Housing Material: PA66 10.4 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 6.2 Application Specification: –– 4.0 14.3 31.3 2 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 4 Position Junior Power Timer 20.6 Housing Material: PA66 5.8 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 6.2 31.3 Application Specification: –– 13.0 19.3 4 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 6 Position Junior Power Timer 26.8 Housing Material: PA66 17.2 7.0 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 6.2 Application Specification: –– 36.2 31.3 6 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 8 Position Junior Power Timer 33.0 Housing Material: PA66 7.0 Wire Size Range: 0.2–2.5 mm2 Product Specification: –– 6.2 Application Specification: –– 31.3 42.4 8 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Unsealed Housings for Wire-to-Wire Applications Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 14 Position Junior Power Timer 51.6 Housing Material: PA66 5.8 15.2 Wire Size Range: 0.2–2.5 mm2 6.2 Product Specification: –– 31.3 Application Specification: –– 61.0 17.8 14 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 6 Position Assy 21.0 23.4 Housing Material: PA66 GF30 Wire Size Range: 0.5–1.0 mm2 21.4 25.4 Product Specification: 108-18633 4.2 Application Specification: 114-18272 17.9 26.4 28.5 40.4 6 Position Receptacle Housings with Slide Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 10 Position Assy 30.8 Housing Material: PBT GF20 Wire Size Range: 0.2 –1.0 mm2 25.52 9.6 Product Specification: 108-18816-1 Application Specification: 114-18485-1 4.2 29.3 22.2 10 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 22 + 4 Position Micro Timer II + Standard Power Timer Assy with Slide 82.4 Housing Material: PBT GF15 8.9 Wire Size Range: MTII: 0.35– 1.0 mm2 SPT: 0.50 – 4.0 mm2 Product Specification: 108-18792-1 4.0 23.5 Application Specification: 114-18480-1 92.37 31.9 22 + 4 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 30 Position Micro Timer II + Junior Power Timer with Slide 4.0 Housing Material: PBT GF20 35.6 39.6 Wire Size Range: MTII: 0.5– 1.0 mm2 JPT: 0.5 – 2.5 mm2 43.4 63.45 Product Specification: 108-18672-1 Application Specification: 114-18315-1 60.7 22.8 62.4 30 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 102 Position Micro Timer II + Junior Power Timer + Maxi Power Timer 76.9 13.3 Housing Material: PBT GF20 Wire Size Range: MTII: 0.2– 1.0 mm2 SPT: 0.2 – 2.5 mm2 MPT: 2.5– 10.0 mm2 43.0 78.4 Product Specification: 108-18931 Application Specification: 114-18634 58.0 61.3 102 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 10 Positions 28.8 30.2 Housing Material: PBT GF20 15.8 Wire Size Range: 0.2–1.0 mm2 28.95 Product Specification: 108-18816-1 Application Specification: 114-18485-1 4.2 42.3 10 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 30 Position Micro Timer II + Junior Power Timer with Slide 59.2 18.78 Housing Material: PBT GF20 27.4 Wire Size Range: See customer drawing Product Specification: 108-18672-1 4.0 Application Specification: 114-18315-1 44.55 83.5 59.2 30 Position Mixed Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Tab Housings Technical Features No. of Positions: 102 Position Micro Timer II + Junior Power Timer + Maxi Power Timer 89.95 57.0 Housing Material: PBT GF20 Wire Size Range: See customer drawing Product Specification: 108-18931 Application Specification: 114-18634 127.1 83.1 102 Position Mixed Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 2 Position Assy 22.6 Housing Material: PBT GF20 Wire Size Range: 0.5–1.0 mm2 Product Specification: 108-18872-1 Application Specification: 114-18564-1 28.4 6.0 8.6 12.6 2 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 4 Positions 32.0 24.55 Housing Material: PBT GF30 Wire Size Range: 0.35– 0.5 mm2 19.8 Product Specification: 108-18664 Application Specification: 114-18308 4.0 14.1 28.9 4 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 6 Positions 24.55 4.0 Housing Material: PBT GF30 Wire Size Range: 0.35– 0.5 mm2 4.0 23.8 Product Specification: 108-18664 Application Specification: 114-18308 16.85 28.9 28.0 6 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 10 Positions 36.0 Housing Material: PBT GF30 Wire Size Range: 0.35–0.5 mm2 4.0 25.8 Product Specification: 108-18664 Application Specification: 114-18308 4.0 16.85 35.0 28.9 10 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 25 Positions 29.0 150.3 Housing Material: PA66 GV30 42.4 Wire Size Range: See customer drawing Product Specification: –– 25.0 90.5 Application Specification: –– 2.5 20.0 5.0 5.0 25 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 35 Positions 167.5 51.5 Housing Material: PA66 GV30 25.0 Wire Size Range: max. 25 mm2 FLR Product Specification: –– 36.0 5.0 Application Specification: –– 51.0 117.31 35 Position Receptacle Housings Part Numbers ✱) No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 35 Positions Housing Material: PA66 GV30 49.5 Wire Size Range: See customer drawing Product Specification: –– 25.0 117.98 Application Specification: –– 166.5 27.0 35 Position Receptacle Housings Part Numbers ✱) No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 35 Positions 53.09 Housing Material: PA66 GV30 Wire Size Range: See customer drawing 9.02 Product Specification: –– 47.04 31.46 Application Specification: –– 37.8 10.89 35 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 35 Positions 158.0 32.0 Housing Material: PA66 GV30 46.7 Wire Size Range: See customer drawing 17.15 Product Specification: –– 129.8 25.0 Application Specification: –– 2.5 5.0 32.6 5.0 35 Position Receptacle Housings Part Numbers ✱) No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings Technical Features No. of Positions: 38 Positions 5.0 Housing Material: PA66 GV13 36.0 25.0 Wire Size Range: See customer drawing Product Specification: –– 168.0 Application Specification: –– 51.0 38 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 4 Positions 15.0 Housing Material: PBT ASA GF30 19.0 21.0 Wire Size Range: max. 2.5 mm2 Product Specification: 108-18102 5.0 Application Specification: 114-18175-2 19.8 21.2 37.75 36.7 4 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 4 Positions 26.4 Housing Material: PBT GF20 Wire Size Range: 2.5–2.5 mm2 26.8 12.3 Product Specification: 108-18793 Application Specification: 114-18485 5.5 31.3 17.8 4 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 16 Positions 35.0 Housing Material: PBT ASA GF30 24.3 6.0 26.3 Wire Size Range: 0.35–2.5 mm2 Product Specification: 108-18102 19.8 5.0 Application Specification: 114-18175 41.2 37.75 55.25 16 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 25 Positions 109.35 5.0 Housing Material: PA66 GV13 20.0 Wire Size Range: See customer drawing 25.0 31.0 Product Specification: –– 5.0 Application Specification: –– 96.5 38.8 25 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 25 Positions 150.3 29.0 Housing Material: PA66 GV30 42.4 Wire Size Range: See customer drawing Product Specification: –– 25.0 90.5 Application Specification: –– 2.5 20.0 5.0 5.0 25 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 35 Positions 52.65 5.0 Housing Material: PA66 GV30 25.0 36.0 Wire Size Range: See customer drawing Product Specification: –– Application Specification: –– 166.29 48.15 35 Position Receptacle Housings Part Numbers ✱) No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 55 Positions Housing Material: PA66 GV13 57.7 Wire Size Range: See customer drawing Product Specification: –– 26.2 107.3 Application Specification: –– 30.8 146.2 55 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 55 Position 8 x Junior Power Timer 47 x Micro Timer II 149.5 29.0 Housing Material: PA66 GV30 39.0 Wire Size Range: See customer drawing 25.0 21.0 Product Specification: –– Application Specification: –– 114.0 5.0 5.0 3.0 55 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer / AMP MCP 6.3 Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 4 Position Junior Power Timer 1 Position AMP MCP 6.3 35.4 32.15 Housing Material: PBT GF20 Wire Size Range: JPT: 0.35 – 2.5 mm2 AMP MCP 6.3: 1.0 – 6.0 mm2 40.2 22.0 Product Specification: 108-18974 Application Specification: 114-18686 9.0 25.0 4 Position Mixed Junior Power Timer / AMP MCP 6.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 2 Position Type A 28.0 5.0 Housing Material: PA66 GV30 Wire Size Range: See customer drawing 17.8 Product Specification: –– 16.0 Application Specification: –– 23.0 2 Position Junior Timer Receptacle Housings, Type A Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 5 Position Type A 28.6 5.0 Housing Material: PA66 GV13 Wire Size Range: See customer drawing 23.5 Product Specification: –– Application Specification: –– 16.6 23.0 5 Position Junior Timer Receptacle Housings, Type A Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 7 Position Type A 48.0 28.0 Housing Material: PA66 GV13 Wire Size Range: See customer drawing 17.5 Product Specification: –– 11.0 5.0 Application Specification: –– 2.0 45.0 39.0 16.0 7 Position Junior Timer Receptacle Housings, Type A Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 2 Position Type B 20.0 28.0 17.0 Housing Material: PA66 GV13 Wire Size Range: See customer drawing 15.3 Product Specification: –– Application Specification: –– 5.0 16.0 23.0 2 Position Junior Timer Receptacle Housings, Type B Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 2 Position Type C 23.4 Housing Material: PA66 GV30 Wire Size Range: See customer drawing 15.3 Product Specification: –– Application Specification: –– 16.0 5.0 28.0 2 Position Junior Timer Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 2 Position Type C 28.0 23.4 Housing Material: PA66 GV30 Wire Size Range: See customer drawing 15.3 Product Specification: –– Application Specification: –– 5.0 20.0 16.0 2 Position Junior Power Timer Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 3 Position Type C 30.5 27.7 Housing Material: PA66 GV30 Wire Size Range: See customer drawing 14.9 Product Specification: –– Application Specification: –– 5.0 25.0 15.7 3 Position Junior Timer Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 3 Position Type C 30.5 28.0 Housing Material: PA66 GV30 Wire Size Range: See customer drawing 14.9 Product Specification: –– Application Specification: –– 5.0 16.0 25.0 3 Position Junior Power Timer Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 5 Position Type C 5.0 28.6 Housing Material: PA66 GV13 Wire Size Range: See customer drawing 25.0 Product Specification: –– Application Specification: –– 16.6 35.0 40.5 5 Position Junior Timer Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 5 Position Type C 5.0 Housing Material: PA66 GV13 24.5 Wire Size Range: See customer drawing Product Specification: –– 31.75 Application Specification: –– 16.6 28.6 40.5 5 Position Junior Power Timer Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 5 Position Type C 30.0 28.6 Housing Material: PA66 GV30 Wire Size Range: See customer drawing 25.0 Product Specification: –– 16.6 5.0 Application Specification: –– 45.0 50.5 5 Position Junior Timer Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings with Locking Spring and Seal Technical Features No. of Positions: 5 Position Type C 5.0 28.6 Housing Material: PA66 GV30 Wire Size Range: See customer drawing 24.5 Product Specification: –– 5.0 Application Specification: –– 45.0 50.5 5 Position Junior Timer Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer & Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 45 Position for Aggregate Applications 128.2 4.0 Housing Material: PA66 GF 41.0 Wire Size Range: MTII: 0.2 – 1.0 mm2 JPT: 0.2 – 2.5 mm2 4.0 Product Specification: –– Application Specification: –– 113.2 31.1 45 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 18.0 mm Length Technical Features No. of Positions: 68 Position for Aggregate Applications 4.0 Housing Material: PA66 GF30 12.4 41.0 Wire Size Range: See customer drawing Product Specification: –– 113.2 32.8 Application Specification: –– 128.2 68 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 2 Position Type A for Aggregate Applications Housing Material: PA66 GF 22.0 15.1 11.8 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 17.0 34.5 16.0 2 Position Receptacle Housings, Type A Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 2 Position Type A for Aggregate Applications 23.4 37.6 Housing Material: PA66 GF 17.5 Wire Size Range: See customer drawing Product Specification: –– 5.0 16.0 20.0 Application Specification: –– 2 Position Receptacle Housings, Type A Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features 37.6 23.4 No. of Positions: 2 Position Type B for Aggregate Applications Housing Material: PA66 GF 22.0 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 20.0 16.0 2 Position Receptacle Housings, Type B Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 2 Position Type C for Aggregate Applications 35.5 Housing Material: PBT GF15 23.6 Wire Size Range: See customer drawing Product Specification: –– 5.0 16.0 Application Specification: –– 23.4 2 Position Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 3 Position Type B for Aggregate Applications 10.0 Housing Material: PA66 GF 25.0 Wire Size Range: See customer drawing Product Specification: –– 16.6 5.0 Application Specification: –– 24.8 38.2 30.4 3 Position Receptacle Housings, Type B Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 4 Position Type B for Aggregate Applications 38.2 15.0 Housing Material: PA66 GF 25.0 14.6 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 29.8 16.6 35.4 4 Position Receptacle Housings, Type B Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 4 Position Type B for Aggregate Applications 15.0 38.2 Housing Material: PA66 GF 25.0 14.6 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 29.8 16.6 35.4 4 Position Receptacle Housings, Type B Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 4 Position Type C for Aggregate Applications 15.0 38.2 Housing Material: PA66 GF 25.0 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 16.6 29.8 35.4 4 Position Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 4 Position Type C for Aggregate Applications 15.0 38.2 Housing Material: PA66 GF 25.0 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 29.8 16.6 35.4 4 Position Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 5 Position Type C for Aggregate Applications 38.15 20.0 Housing Material: PA66 GF 25.0 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 16.6 34.8 40.4 5 Position Receptacle Housings, Type C Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 5 Position Type B for Aggregate Applications 20.0 38.2 Housing Material: PA66 GF 25.0 Wire Size Range: See customer drawing Product Specification: –– 16.6 5.0 Application Specification: –– 34.8 40.4 5 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 7 Position for Aggregate Applications 30.0 38.15 Housing Material: PA66 GF 25.0 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 16.6 44.8 50.4 7 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 7 Position for Aggregate Applications 38.15 30.0 Housing Material: PA66 GF 25.0 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 16.6 44.8 50.4 7 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 7 Position for Aggregate Applications 36.1 5.0 Housing Material: PBTP GFV30 25.5 Wire Size Range: See customer drawing Product Specification: –– 16.6 Application Specification: –– 50.5 7 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 7 Position for Aggregate Applications 36.1 5.0 Housing Material: PBTP GFV30 25.5 Wire Size Range: See customer drawing Product Specification: –– Application Specification: –– 16.6 50.5 7 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 15 Position for Aggregate Applications 5.0 34.0 Housing Material: PBTP GV15 33.3 Wire Size Range: See customer drawing Product Specification: –– 15.0 Application Specification: –– 56.75 15 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 25 Position for Aggregate Applications 125.95 27.0 Housing Material: PA66 GF 39.6 Wire Size Range: See customer drawing Product Specification: –– 5.0 Application Specification: –– 27.0 25 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 35 Position for Aggregate Applications 146.0 37.0 Housing Material: PA66 GF 20.0 Wire Size Range: See customer drawing Product Specification: –– 25.0 Application Specification: –– 132.0 25.5 35 Position Receptacle Housings, Standard Version Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 35 Position for Aggregate Applications 141.35 36.5 Housing Material: PA66 GF Wire Size Range: See customer drawing 36.29 Product Specification: –– Application Specification: –– 128.3 5.0 35 Position Receptacle Housings, Opposite Cable Exit Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 55 Position for Aggregate Applications 5.0 Housing Material: PBT GF15 36.0 Wire Size Range: See customer drawing 143.3 Product Specification: –– Application Specification: –– 46.8 100.7 55 Position Receptacle Housings, Opposite Cable Exit Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Tab Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 2 Position for Aggregate Applications 17.2 Housing Material: PBT Wire Size Range: See customer drawing 8.5 7.3 7.0 19.0 12.65 36.5 Product Specification: –– 13.8 1.5 12.3 Application Specification: –– 19.6 2 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Junior Power Timer Housings Catalog 889759-3 Revised 7-2011 Tab Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 15 Position for Aggregate Applications 50.3 Housing Material: PBTP GV10 Wire Size Range: See customer drawing 33.45 Product Specification: –– Application Specification: –– 62.0 47.1 16.7 5.0 15 Position Tab Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Power Timer & Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 4 Positions 19.8 29.4 22.5 Housing Material: PBT GFV30 Wire Size Range: See customer drawing 19.0 Product Specification: 108-18102 Application Specification: 114-18175 5.0 37.75 4 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Power Timer & Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 4 Positions 31.9 Housing Material: PBT GV30 19.0 Wire Size Range: See customer drawing Product Specification: 108-18102 5.0 37.75 Application Specification: 114-18175 33.3 4 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Power Timer & Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 6 Positions 37.75 5.0 Housing Material: PBT ASA GF30 Wire Size Range: See customer drawing 24.3 Product Specification: 108-18102 Application Specification: 114-18175 34.5 37.75 6 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Power Timer & Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 10 Positions 42.2 26.3 Housing Material: PBT ASA GF30 Wire Size Range: See customer drawing 37.75 Product Specification: 108-18102 Application Specification: 114-18175 5.0 24.3 10 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Power Timer & Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 16 Positions 52.1 Housing Material: PBT ASA GF30 Wire Size Range: See customer drawing 24.3 Product Specification: 108-18102 Application Specification: 114-18175 5.0 37.75 50.6 19.8 16 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Power Timer & Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 25 Positions 9.5 2.0 38.1 Housing Material: PBT GF10 Wire Size Range: See customer drawing 9.5 32.5 8.0 Product Specification: –– 4.0 Application Specification: 114-18175 78.5 38.1 30.6 62.0 25 Position Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Power Timer & Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 42 Position 6 x Junior PowerTimer 36 x Micro Timer II 81.5 5.0 Housing Material: PBT GF30 32.0 17.6 Wire Size Range: 0.5–2.5 mm2 Product Specification: –– 4.0 Application Specification: –– 77.2 63.6 42 Position Mixed Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Sealed Power Timer & Micro Timer II Housings Catalog 889759-3 Revised 7-2011 Receptacle Housings for Contacts 21.0 mm Length Technical Features No. of Positions: 70 Position 10 x Junior PowerTimer 60 x Micro Timer II 31.5 46.6 Housing Material: PBT GF30 Wire Size Range: 0.5–2.5 mm2 38.49 133.1 Product Specification: –– 5.0 Application Specification: –– 4.0 70 Position Mixed Receptacle Housings Part Numbers No. of Pos.
Timer Housings and Connectors Catalog 889759-3 Revised 7-2011 Engineering Notes 178 All specifications subject to change. Consult TE Connectivity for latest specifications.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Introduction TE Connectivity Tooling for the Automotive Industry The TE Connectivity Application Tooling group is dedicated to providing high quality equipment options to meet all levels of your connector product specifications. We are also able to provide a broad range of equipment for other manufacturer’s products.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Insertion Machines for Single Contacts Pin Insertion Machine TE Connectivity Insertion Machine platforms combined with performance enhancing accessories provide the flexibility to meet a wide range of customer requirements in the manufacturing of printed circuit boards. Our goal is to provide the optimal solution for the production needs of our customers.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Insertion Machines for Single Contacts P 200 Semi-Automatic Bench Machine for PCB Processing The P 200 semi-automatic bench machine positions manual loaded PCBs under an installed tool. The tool may be a solder head, a camera for automatic inspection, or an insertion head for the application of TE Connectivity products.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Insertion Machines for Single Contacts P 350 Fully-Automatic Insertion Machine for High Volumes Single Pin Repair Station The P 350 is a fully-automatic insertion machine with the ability to handle a large variety of TE Connectivity terminals as well as customer specific terminals. A standard P 350 machine comes with 3 base insertion tools mounted onto an automatic tool changer.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 IDC Machines IWS 188 IDC Workstation The IDC workstation produces electrical connections for harness assemblies specifically intended for the use within dashboard applications in the automotive industry. The proven insulation displacement technology ensures a high level of reliability. The software allows the production of different harness configurations featuring up to 11 connectors.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Lead Makers Precision Controller The new Precision Controller provides an upgrade path for already installed equipment. By installing the Precision Controller onto a bench terminator or a Komax Gamma 333 PC lead maker, the System III-FA Applicator can be used.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Lead Makers Gamma 255 Lead Maker Processing of Small Wire Sizes The Gamma 255 Lead Maker is a flexible fully-automatic crimping machine for efficient wire processing. It processes cross sections in a range from 0.013 mm2 up to 2.5 mm2 in excellent quality. The entire cross section is processed using programmable, highly dynamic servo-drives and V stripping blades.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Lead Makers Alpha 355 / 355 S Lead Makers The Alpha 355 and 355 S are four Station Lead Makers. The dual channel cutting head allows for a large range of wire sizes without blade changes. The drive unit for the cutting head is positioned beneath the wire line to give the machine an uncluttered and ergonomic design. All processing stations are readily accessible through the vertically opening safety covers.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Lead Makers Alpha 358 Fully-Automatic Crimping Machine The Alpha 358 fully-automatic crimping machine is designed for two-sided crimping and seal loading and sets new standards in the processing of long cables. Cables up to 35 meters (27.34 yards) in length can now be processed at high speed on a machine just four meters (4.37 yards) long.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Lead Makers Alpha 477 Lead Maker Double Crimp Connections with Two Different Wires The Alpha 477 machine allows the processing of a wide variety of wire combinations from a double crimp up to three different contacts, two different seals and two different wire sections. The arrangement of six processing stations plus a double gripper unit make for highly diverse processing possibilities.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Lead Makers Zeta 633 / 633 L Fully-Automatic Crimping Machine The Zeta 633 and 633 L are highly flexible fully-automatic crimping machines for just-in time production. The flexible machine concept creates an almost unlimited number of possibilities for handling small jobs or wire sequences. The operator is able to reduce the required material changeovers and interruptions in production to a minimum.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Lead Makers Zeta 651 Single End Block Loader The Zeta 651 is the economical solution for the production of harnesses with single sided insertion in housings with one or two rows. This machine is especially characterized by a high degree of automation and the reliable insertion process. The machine is used in combination with the flexible Zeta 633 base machine.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Lead Makers Zeta 655 / 656 Lead Maker Double End Block Loader The Zeta 655/656 Lead Maker is the flexible solution for single and double-sided housing insertion. This machine is characterized by a high degree of automation and a reliable insertion process.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Applicators Ocean Series of Applicators Why a new Applicator Design? We standardized our applicator offerings to provide global design consistency and to offer you the ultimate flexibility with choices in feeding options. The Ocean Applicators are designed so that all feed options are interchangeable with the common base applicator. Our pneumatic and mechanical feed options have been completely re-designed.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Applicators Applicator Wear Parts Applicator Wear Parts Stocking Programm To ensure the support of our installed Applicator base, we have established a stocking programm for wear parts. Subsequently, all crimpers and anvils for your applicator are normally available ex stock, ensuring the shortest possible lead times.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Applicators System III Applicator with Feeder Applicator for Large Wire Sizes Flexible and efficient termination of single and double wire applications, self-adjustment of the feeder and optimum quality of wire termination are the main features of our new applicator – the System III Applicator.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories AMP 3K/40 and AMP 5K/40 Terminators Based on the field proven Model “G” Terminator, the AMP 3K/40 and AMP 5K/40 Terminators are the latest in a series of machines for wire termination using reeled terminals. The AMP 3K/40 Terminator provides 13 kN (3,000 lb) crimp force and is capable of crimping approx. 2.5 mm2 (14 AWG) wire size.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories SC15 Stripper Crimper The pneumatically and electrically driven SC15 crimping machine is a particularly efficient and operator friendly crimping machine with outstanding repetitive precision, which satisfies the highest requirements. It can be adjusted to the specific requirements of any given contact/cable connection.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories Crimp Quality Monitor II (CQM II) Simply put, crimp height measurement is the best nondestructive way to ensure the quality of a crimped terminal. A proper crimp height ensures the mechanical and electrical properties of the crimp meeting the stringent application specifications designed by the terminal engineer.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories BT 752 Stripping, Sealing and Crimping Machine The BT 752 crimping machine delivers three processes in a single device: stripping, seal loading and crimping. BT 711 Crimp Module The BT 711 machine is a crimp module for the most demanding applications.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories BT 722 Bench Top Press The BT 722 Bench Top Press is used for the manual crimping of contacts. The BT 722 Press is operated from a touch screen. The new TopTouch user interface allows jobs to be set-up quickly and easily. Even during production set-up, the machine operator is prompted to conduct quality measurements.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories CRIMPMATIC 970 and 971 Crimp Presses for Reeled or Loose-Piece Terminals Both machine versions permit the cost effective manufacturing of crimp connections with a high production efficiency. The CRIMPMATIC 970 machines are cabable of processing wires of up to approx. 16 mm2 (AWG 5), depending on the terminal stock thickness.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories AT-SC Pneumatic Safety Crimping Press This pneumatic crimping machine features a newly developed safety mechanism, and is designed to crimp connections up to 50.0 mm2 depending on the terminal design. By means of a fitted safety valve, crimping is not released where the size of the opening between the impact surfaces of the dies exceeds 5.9 mm.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories AT-66 Hydraulic Crimping Machine The AT-66 hydraulic crimping machine features an extremely compact design resulting in low space requirement. The hydraulic power is provided by a separate hydraulic unit with main switch, power distribution and pump.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories StripCrimp PP3 Stripping and Crimping Machine Extremely fast stripping and crimping of wires down to a wire cross section of 0.012 mm2, minimum strip lengths and a most compact overall design are the special features of StripCrimp PP3 machine, which is controlled and powered pneumatically.
Timer Interconnection System Application Tooling and Equipment Crimping Presses and Accessories The AVG 0160 is a stripping and twisting machine for wires with insulation such as PVC, Teflon™, Silicon, Fiberglass, Rubber etc. The machine can cover a wire size range from 0.03 mm2 up to 6 mm2 with an adjustable stripping length from 0.5 mm up to 29 mm. The machine utilizes rotary stripping blades for a smooth, 360° cutting of the insulation. The blades are made out of a special tool steel for longevity.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Crimping Presses and Accessories Kappa Cut and Strip Family The Kappa family strippers are ideal for cutting individual and special wires to length and stripping them. They can strip in sections, allowing them to strip even extremely long length in perfect quality. The machines cover an extraordinarily broad range of cross sections.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Resistance Welding Equipment Resistance Welding Module TE Connectivity offers semiand fully-automatic modules for resistance compact welding of terminals. This resistance welding process allows us to achieve minimum transitional resistance between conductor and contact, higher current capacity and long-term stability of the wire termination.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 MOST TM Equipment Lambda 9100 POF Fully-Automatic Processing of MOST™ Leads For processing large quantities of plastic optical fibers (POF) with low human recourses, TE Connectivity offers the fully-automatic machine Lambda 9100 POF. All processing steps – from feeding and preparation to testing and deposition – are fully-automatic.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 MOST TM Equipment MOST™ Measuring Devices These devices measure the position of the prepared end of the optical fibers relative to the reference point of the insert extremely accurately. The result is displayed clearly by means of the digital read out. The digital display can be zeroed by means of the setting gauge. A special Digital Crimp Height Micrometer verifies the crimp height of metal inserts.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Hand Tools SDE Standard Die Envelope SDE die system is a flexible approach to crimp tooling that allows the use of the same dies with tooling across a range of application platforms. A large selection of die options are already available for crimping a broad range of terminals and wire sizes.
Timer Interconnection System Application Tooling and Equipment Hand Tools IDC Hand Tools IDC or Insulation Displacement Crimping is based on an entirely different concept to conventional crimping and requires these special types of tool. We provide a large range of tools for connector families like: • MQS Connectors, • AMP DUOPLUG, • AMP MONO-SHAPE and • AMP multifitting and usually based on the well proven Pistol Grip tools, featuring connector holding fixtures that crimp and index one pitch at a time.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Hand Tools Hand Tool Kits TE Connectivity provides standard kits that contain the necessary equipment to carry out specific tasks to the highest professional standards. We can also provide custom kits for volume requirements containing only tools, or a combination of tools and terminals tailored to your specific requirements.
Timer Interconnection System Application Tooling and Equipment Hand Tools Hand Tool Kits For more detailed information please visit our websites: www.tooling.te.com • www.tooling.te.com/europe • www.tooling.te.com/china 2-212 All specifications subject to change. Consult TE Connectivity for latest specifications.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Hand Tools Insertion and Extraction Tools Insertion and Extraction Tools are used for inserting discrete terminals into connector housings or removing them, without causing damage to either the terminals or housings.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 FFC-FPC Equipment FFC Hand Tool The very easy-to-handle 10 position hand tool allows variable settings for both the foil stop and foil guide. A correct and repeatable crimp process is achieved by an integrated ratchet mechanism. A FFC hand tool case can be built up around your particular application requirements.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 FFC-FPC Equipment Assembly Machine to Connect FFC and PCB This machine has been specially designed to connect a Flexible Printed Sensor with a PCB by using an ACTION PIN FFC Contact. The Flexible Printed Sensor and the PCB are manually loaded into the machine. After the cycle has been started, the insertion head is positioned above the first insertion position.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Magnet Wire Equipment MAG-MATE and SIAMEZE Inserter Mark II with PLC TE Connectivity magnet wire terminations are a perfect connecting alternative to all soldering techniques used in a lead-free environment. With the Inserter Mark II TE Connectivity can offer an economic solution especially for the application of MAG-MATE and SIAMEZE terminals.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Magnet Wire Equipment AMPLIVAR Terminator for Parallel and End Connections The machine was especially developed for processing magnet wire connections. Different versions for end-feed and side-feed contacts are available. The design takes into account that the motor windings and coils can be supplied directly to the connectors. The exposed crimp position permits precise handling.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Board Processing Equipment Press-Fit Systems TE Connectivity offers a complete line of manual and automatic servo-electric driven presses for the application of press-fit connectors. Each unit is PC controlled and incorporates force feedback through load cells. The servoelectric drive can precisely control applied force, speed and travel without the “spring” effect common in pneumatic and hydraulic presses.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Board Processing Equipment CBP-3T/5T Bench Manual Electric Press The benchtop press with midrange board handling and pressing capacities utilizes PC control and servo-electric drive system. Pressing capacities of 27 kN [3 tons] and 44 kN [5 tons] allow for a wide range of applications on boards up to 460 mm x 610 mm [18" x 24"].
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Board Processing Equipment CAP 6T Automatic Electric Press The CAP-6T Automatic Electric Press is the newest addition to the successful TE Connectivity servo press line. It provides the proven force control capabilities and quality assurance of the line in an automatic press.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Board Processing Equipment PCB Depanelling Systems TE Connectivity knows the total applied cost of your product is almost at its highest when the PCB is separated from the panel. Protect the time and investment that has been applied to your product by using a gentle, safe and effective depanelling equipment solutions offered by TE Connectivity.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Equipment for Electrical Testing Electrical Test Equipment for the Automotive Industry Specialized wire harness testing for the automotive subcontracting industry is based on high volume requirements and incorporates the automatic inspection of non-electrical parameters. To this aim well thought out adaptation systems are the key factor providing a fast, reliable and user-friendly test environment.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Application Tooling Global Field Service Organization TE Connectivity provides Global Field Service support on our application tooling. Field Specialists are located across every continent to provide timely response to customer needs.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Application Tooling Americas Field Service Locations Americas Field Service Locations Canada: Toronto United States: California Florida Minnesota Missouri New Jersey Ohio Pennsylvania Texas Mexico: Chihuahua Guadalajara Hermosillo Juarez Reynosa AMERICAS FIELD SERVICE 1-800-722-1111 fieldservicesnorthamerica@te.com For more detailed information please visit our websites: www.tooling.te.com • www.tooling.te.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Application Tooling EMEA Field Service Locations EMEA Field Service Locations Austria Czech Republic Denmark Finland France Germany Great Britain India Italy Morocco Netherlands Norway Poland Russia South Africa Spain Sweden Switzerland Tunisia EMEA FIELD SERVICE +49 (0) 6251 133 1376 kd-hotline.ampde@te.com For more detailed information please visit our websites: www.tooling.te.com • www.tooling.te.
Timer Interconnection System Application Tooling and Equipment Catalog 889759-3 Revised 7-2011 Application Tooling Asia Pacific Field Service Locations Asia Pacific Field Service Locations Australia Singapore China Taiwan Japan Thailand Korea Vietnam ASIA PACIFIC FIELD SERVICE Please contact your local Sales or Service Engineer For more detailed information please visit our websites: www.tooling.te.com • www.tooling.te.com/europe • www.tooling.te.
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Numerical Index Part Number Page Part Number 58495-1 100132-1 106455-3 2-120 2-300 2-87,0 2-89,0 2-91,0 2-950 2-950 2-93,0 2-960 2-135, 2-138, 2-149, 2-151, 2-168 2-131 2-840 2-131 2-164 2-164 2-165 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-168 2-156 2-156 2-157 2-157 2-160 2-160 2-165 2-166 2-155 2-152 2-152 2-152 2-152 2-152 2-152 2-168 2-168 282762-3 282762-4 282762-5 282762-6 282762-7 2
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Numerical Index Part Number 827229-1 827229-2 827229-3 827229-4 827229-5 827229-6 827249-1 827254-1 2-42, 2-42, 2-42, 2-42, 2-42, 2-42, 2-71, 2-74, 2-71, 2-74, 2-71, 2-74, 2-71, 2-74, 2-71, 2-74, 2-71, 2-74, 2-76, 827257-1 2-75, 827257-2 2-75, 827257-3 2-75, 827257-4 2-75, 827257-5 2-75, 827257-6 2-75, 827257-7 2-75, 827257-8 2-75, 827257-9 2-75, 1-827257-1 2-75, 1-827257-2 2-75, 1-827257-3 2-75, 1-827257-4 2-75, 1-
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Numerical Index Part Number 926005-1 926005-2 926005-3 926006-1 926006-2 926006-3 926007-1 926007-2 926007-3 926008-1 926008-2 926008-3 926171-1 926171-2 926755-1 926755-2 926756-1 926756-2 926965-1 926965-2 926973-1 926984-1 926984-2 926985-1 926985-2 927766-1 927766-3 927766-8 1-927766-1 2-927766-1 927768-1 927768-3 927768-6 927768-8 927768-9 1-927768-1 2-927768-1 927770-1 927770-3 927770-6 927770-8 927771-1 927771-3 927771-6 927771-8 927771-
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Numerical Index Part Number 927857-1 927857-2 927857-4 927857-5 927863-1 927863-2 927863-3 927863-4 927864-1 927864-2 927864-3 927864-4 927865-1 927865-2 927865-3 927866-1 927866-2 927866-3 927871-1 927871-2 927871-4 927872-1 927872-2 927872-4 927877-1 927877-2 927877-4 927878-1 927878-2 927878-4 927879-1 927879-2 927879-3 927880-1 927880-2 927880-3 927892-1 927892-2 927892-3 927892-4 927892-5 927893-1 927893-2 927893-3 927893-4 927893-5 927936
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Numerical Index Part Number 929941-6 1-929941-1 2-929941-1 929942-1 929942-3 929942-6 1-929942-1 2-929942-1 929948-1 929948-2 929948-3 929948-4 929948-5 929948-6 929948-7 929949-1 929949-2 929949-3 929949-4 929949-5 929950-1 929950-2 929950-3 929950-4 929951-1 929951-2 929951-3 929951-4 929952-1 929952-2 929952-3 929952-4 929952-7 929952-8 929953-1 929953-2 929953-3 929953-4 929953-7 929953-8 929954-1 929954-2 929954-3 929954-4 929955-1 929955-
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 963208-1 963209-1 1-963211-1 2-963211-1 3-963211-1 4-963211-1 5-963211-1 963213-1 1-963215-1 2-963215-1 3-963215-1 4-963215-1 5-963215-1 963216-1 1-963217-1 2-963217-1 963225-1 963243-1 963244-1 963245-1 963292-1 963293-1 963294-1 963317-1 2-171 2-170 2-172 2-172 2-172 2-172 2-172 2-173 2-174 2-174 2-174 2-174 2-174 2-174 2-127 2-127 2-176 2-300 2-300 2
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 963825-2 1-963860-1 1-963860-2 1-963860-3 2-963860-1 2-963860-2 2-963860-3 1-963861-1 1-963861-2 1-963861-3 2-963861-1 2-963861-2 2-963861-3 963884-1 963885-1 963898-1 963898-2 963898-3 963899-1 963899-2 963899-3 963900-1 963900-2 963900-3 963900-4 963901-1 963901-2 963901-3 963901-4 963902-1 963902-2 963902-3 963903-1 963903-2 963903-3 963904-1 963904-2
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 1-964295-3 2-964295-1 2-964295-2 1-964296-3 2-964296-1 2-964296-2 1-964297-3 2-964297-1 1-964298-3 2-964298-1 1-964299-3 2-964299-1 4-964299-1 1-964300-3 2-964300-1 4-964300-1 1-964301-3 2-964301-1 1-964302-3 2-964302-1 964303-1 964304-1 964305-1 964305-3 964306-1 964306-3 964307-1 964308-1 964309-1 964310-1 964311-1 964312-1 964313-1 964314-1 964321-1 9
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Numerical Index Part Number Page Part Number Page Part Number Page Part Number 2-968965-2 3-968965-1 1-968966-1 1-968966-2 2-968966-1 2-968966-2 3-968966-1 969005-2 969005-3 969005-6 4-969005-1 969007-1 969008-1 969019-2 969019-3 969019-6 4-969019-1 969022-1 969023-1 969028-2 969028-3 969029-2 969029-3 969036-4 969040-1 969041-1 969042-1 969043-1 969044-1 969044-5 1-969044-5 969045-1 969045-5 1-969045-5 969079-2 969079-3 969080-2 969080-
Timer Interconnection System Catalog 889759-3 Revised 7-2011 Disclaimer and Trademarks Disclaimer While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice.
Global Contacts Americas Argentina – Buenos Aires Phone: +54-11-4733-2202 Fax: +54-11-4733-2250 Brasil – São Paulo Phone: +55-11-2103-6105 Fax: +55-11-2103-6204 Chile – Santiago Phone: +56-2-345-0300 Fax: +56-2-223-1477 Canada – Toronto Phone: +1-905-475-6222 Fax: +1-905-474-5520 Product Information Center: Phone: +1-905-470-4425 Fax: +1-905-474-5525 Colombia – Bogotá (Venezuela /Ecuador) Phone: +57-1-319-8999 Fax: +57-1-319-8989 Mexico – Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1
Tyco Electronics AMP GmbH a TE Connectivity Ltd. company AMPèrestr. 12–14 64625 Bensheim / Germany Phone: +49-(0)6251-133-0 Fax: +49-(0)6251-133-1600 www.te.com www.te.com/automotive www.te.com/automotive/sensors www.te.com/automotive/most.com TE Connectivity and TE connectivity (logo) are trademarks. Tyco Electronics AMP GmbH certified acc.