User Manual

AMP Metrimate
Pin and Socket Connectors
44
Catalog 82045 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 06-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets are Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com equivalent U.S. Customary Units. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NOTE: All part numbers
are RoHS Compliant
Free-Hanging Connector
and PC Board Mount Pin
Header
Material and Finish
Connector
Red thermoplastic, 94V-0 rated
Header
Housing - Red thermoplastic,
94V-0 rated
Contact - Copper alloy, plated
tin or gold duplex
Related Product Data
Contacts - Pages 9–14
Keying Plug - See Below
Dimensional Specifications
and Recommended PC Board
Layout - Pages 45–47
Performance Characteristics -
Page 3
Technical Documents - Page 58
Plug Housing
(Accepts Socket Contacts)
Right-Angle
Pin Header
Key Knock-Out
Locations
Keying
Wedges
Locking
Latch
AMP/2007
Metrimate Pin and Socket Catolog
Illustration No. 43
DG/mra • 1-25-94
Revised by MPD • 7-27-94
A
B
No. of In-Line Connector
Right-Angle Pin Header
Positions Plug Part No.*
Contact Standard Keyed
Plating Part No. Part No.
6 208117-1 Tin ***208116-4*** —
10 208404-1 Tin 3-208403-2
3-208403-3
1
,
3-208403-4
2
Tin 208099-3 —
19 208100-1
Gold** 212630-4 —
*** Housing only, order contacts separately. See pages 9–14 for contact
specifications.
*** Duplex plated 0.00076 [.000030] gold on mating end, tin on
termination end, with entire contact nickel underplated.
***Longer tail version also available, P/N 208116-5.
****1
Location A knocked out.
****2
Location B knocked out.
Keying Plugs
(for use with all types)
Material
Nylon
Related Product Data
Used with:
Square Grid Connectors -
Pages 31–34
In-Line Connectors -
Pages 39–41
Drawer Connectors -
Pages 18, 19
For Socket Headers
For Plug Housings
AMP/2007
Metrimate Pin and Socket Catolog
Illustration No. 44
DG/marcusio • 1-25-94
Revised by MPD • 7-27-94
Keying Plug
Part No. 207654-1
(For use in socket
cavities only)
Plug Housing
(Shown for reference only)
Keying Plug
(Installed)
AMP/2007A
Metrimate Catalog #82045
Illustration No. 81
MPD • 7-27-94
2.41
[
.095
]
5.72
[
.225
]
10.16
[
.630
]
AMP/2007A
Metrimate Catalog #82045
Illustration No. 82
MPD • 7-27-94
Keying Plug
Part No. 211108-1
Keying Plug
(Installed)
Keying Wedge
Part No. 208400-1
(for use with In-Line Plug
Connectors, above)
In-Line Connectors, 5.08 [.200] Centerline
Keying Plugs
In-Line Connectors