User Manual

55
AMP Metrimate
Pin and Socket Connectors
Catalog 82045 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 06-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets are Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com equivalent U.S. Customary Units. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NOTE: All part numbers
are RoHS Compliant
Product Facts
36-circuit power •
distribution system
High current capability•
Compact design: •
95.1 [3.744] x 33 [1.300]
Accommodates one or •
two voltages (with split
bus)
Notes: 1. Copper bus for Part Nos. 208063-6 and 208063-7 is divided lengthwise, providing dual 18-cir-
cuit buses. Other bussing configurations can be made available, consult Tyco Electronics.
Notes: 2. These connectors mate with 36-circuit Square Grid Receptacle Part No. 207020-1 (page 31).
Notes: 3. Dimensional tolerances are not illustrated. This information is available on Tyco Electronics
engineering drawings; use product part number when ordering drawings.
95.1
[3.744]
84.9
[3.344]
5.1
[.200]
6.35
[.250]
20.3
[.800]
16.5
[.650]
33
[1.300]
Split Bus
(See Note 1.)
Copper Bus
Base
4.3
[.169]
Dia.
Socket Header
(See Note 2.)
M5 x 0.8
[10-32]
Screw (2)
Heat Rise
Characteristics
The following graph indi-
cates the maximum temper-
ature rise of a power
distribution connector with
various currents being
applied. The specific con-
nector under test is a fully
bussed, 36-circuit power
distribution connector with
7-8 mm
2
[8 AWG] input
wire. The mating connector
is a standard 36-circuit Met-
rimate receptacle with all
contacts terminated to 1 219
[48] leads using 2 mm
2
[14
AWG] wire.
30
20
10
A B C D E F G H
Current Applied
Max. Temperature Rise. ºC
A — 13 amperes, one central contact.
B — 13 amperes (combined), two adjacent central contacts.
C — 20 amperes (combined), four central contacts.
D — 40 amperes (combined), four central contacts.
E — 60 amperes (combined), four central, three end contacts.
F — 50 amperes (combined), four corner contacts.
G — 100 amperes (combined), 36 contacts.
H — 155 amperes (combined), 36 contacts.
Bus Contact Connector
Configuration Plating Part No.
Full Bus Tin 208063-5
Split Bus
Tin
208063-6
(See Note 1.)
Sel. Gold/
208063-7
Nickel
1
1
0.00076 [.000030] gold on mating
area, 0.00381 [.000150] tin on
remainder, both over 0.00127
[.000050] nickel.
Power Distribution Connectors
Power Distribution Connectors