User Manual

57
AMP Metrimate
Pin and Socket Connectors
Catalog 82045 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 06-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets are Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com equivalent U.S. Customary Units. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NOTE: All part numbers
are RoHS Compliant
Pneumatic Hand Tool for
Interchangeable Die Sets
6-26 Pneumatic Tool
System
Effortless crimping for a
broad range of terminals,
either bench-mounted or
hand-held for working in
cramped quarters.
• Lightweighttooleliminates
physical force required by
hand tools
• Hand-orfoot-switch
operation
• Terminationwire
range from 26-6 AWG
[0.12-13.0mm2], plus coaxial
and fiber optic cable
• WorkswithexistingAMP-
compatible crimp heads
and die sets
• Ratchetcontroloptionpro-
vides complete crimp cycle,
eliminating partial crimps
• Userotatinghead
assembly to reach difficult
termination locations
For more information, request
Catalog 124208.
Battery-Powered Crimp
Tool Kits
The Battery-Powered
Crimp Tool Kit is a fast,
ergonomically-designed
tool is ideal for use at the
bench, on the line, or in
the field. It’s completely
portable, lightweight (3.48
lbs including battery) and
compact. The charge delivers
over 100 crimps - charge time
is 40 mins. The kit includes
the tool, 2 batteries and the
charger.
P/N 1213890-1 — SDE Battery
Powered Crimp Tool Kit
(dies not included)
P/N 1213805-1 — CERTI-
CRIMP II, SA Battery
Powered Crimp Tool Kit
(heads not included)
P/N 1213840-1 — CERTI-
CRIMP, Large Die, C-Head
Adapter Battery Powered
Crimp Tool Kit (dies not
included)
P/N 1213819-1 — CERTI-CRIMP,
Large Die, Straight-Action
Adapter Battery Powered
Crimp Tool Kit (dies not
included)
For more information, request
Catalog 1773381.
Application Tooling (Continued)
CRIMP MACHINES
Semiautomatic bench
machines for crimping
reeled terminals and con-
tacts, featuring a quiet and
reliable direct motor drive,
microprocessor controls for
ease of setup and operation,
and guarding and light-
ing designed for operator
convenience and safety. All
models are equipped with
either manual or automatic
precision adjustment of crimp
height. Machine-mounted
sensors are available for
crimp quality monitoring
using conventional miniature-
style applicators.
For more information, request
Catalog 1654956-2, Video 198116,
Catalog 82275 [Crimp Quality
Monitor (CQM)], Video 198094.
Note: New Stripping Module
available, see page 79.
AMP-O-LECTRIC Model
“G” Terminating
Machines, Part Nos.
354500-1, -9, -11
AMP-O-LECTRIC Model “K”
Terminating Machine with a
permanently-mounted ap-
plicator that accepts inter-
changeable die sets to apply
a variety of tape-mounted
terminals and splices. Many of
the die sets can also be used
in AMP-O-LECTRIC Termi-
nating Machines with a tape
applicator.
For more information, contact
Tyco Electronics.
AMP-TAPETRONIC
Machine, Part No. 69875
103330
Application Tooling