User Manual

AMP Metrimate
Pin and Socket Connectors
58
Catalog 82045 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 06-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets are Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com equivalent U.S. Customary Units. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NOTE: All part numbers
are RoHS Compliant
Application Tooling (Continued)
The unique system pro-
vides 100% on-the-fly crimp
inspection. It measures the
crimp height of each termina-
tion, and evaluates the quality
of each crimp. If a crimp is
questionable, the monitor
alerts the operator with both
visual and audible alarms. It
also provides ports for print-
ing and networking. When
used with AMP-O-LECTRIC
Model “G” Termination Ma-
chines, the monitor is mount-
ed to the machine. When
used with AMPOMATOR CLS
IV Lead Making Machines, it is
integrated into the machine’s
operating system.
For more information, request
Catalog 82275.
Crimp Quality Monitor
(CQM)
Part No. 1320420-2
The System III Applicator
introduces several new tech-
nologies into the applicator
including a precision servo-
electric motorized feed-
ing system, a built-in data
module for storing terminal
crimp and set-up information,
a precision fit round ram, and
a newly designed terminal
depressor. It still utilizes the
proven quality of the HD-M
crimper and anvil tooling.
For more information, request
Catalog 1654956-8
System III Applicator
The AMP 3K/40 and AMP
5K/40 Terminators are
designed for customers
that require the increased
output and quality of a
semiautomatic machine
at a competitive price. By
incorporating the most
commonly requested
features as standard and
offering a long list of optional
equipment, these terminators
offer flexibility to meet the
specific needs of various
applications at the lowest
possible cost.
Features
3,000 lb [1361 kg] max. •
crimp force (AMP 3K/40);
5,000 lb [2268 kg] max. •
crimp force (AMP 5K/40)
Toolless removal of •
applicators and guards
Jog capability•
Quiet, fast operation - •
80/76 dBA and cycle time
less than 0.400 seconds
Accepts Heavy Duty Mini •
stye applicators
Wide range of optional •
equipment such as toolless
precision crimp height
adjust, batch counter, CQM
capability and work light
For more information, request
Catalog 1654956-2.
Note: New Stripping Module
available, see page 79.
AMP 3K/40 and AMP
5K/40 Terminating
Machines
Your Quality Program
calls for more than a
Good Crimping System. It
demands proof — the proof
you get with the SLE crimp
force monitor. It has high-
resolution piezo-quartz
sensor technology for a
more precise identification of
typical crimping faults.
Sure, you can sample and
test crimp height with a
micrometer. In fact, that’s
how you standardize your
process. But for ongoing
quality control, testing every
crimp, SLE is the choice.
It’s known worldwide, and
meets our standards or a
high performance terminating
system. That’s how you can
be sure.
High quality crimping — with
verification — means higher
production and productivity.
Crimp Force Monitor
(CFM)
Features
• 1or2Channels
• 128x128DotMatrix
• Zone&PeakForce
Analysis
• ForceTrigger
• EncoderProximityTrigger
• AbsoluteForce
Measurement
• Monitorsthewirebarrel
crimp of open-barrel,
uninsulated contacts and
terminals
• Real-timemonitoringof
every crimp
• Specialapplicatorsarenot
required
• UsewiththeAMP-3K/40
and AMP-5K/40 presses
from Tyco Electronics
• Frame-mountedforce
sensor
• Forbenchorfully-
automatic machines
• Pleasecontactusforany
other type of press you
would like to use with the
CFM
Crimp Force Monitor
Specifications
• Electrical:110-230VAC
Single Phase, 50-60 Hz, 15
watts
• Size(Monitor):178mmx
137mm x 95mm
• Weight(Monitor):1.02kg
(single channel), 1.05kg
(double channel)
For more information, request
Catalog 1309085-2
Application Tooling