User Manual

17
AMP Metrimate
Pin and Socket Connectors
Catalog 82045 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 06-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets are Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com equivalent U.S. Customary Units. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
NOTE: All part numbers
are RoHS Compliant
.125 POWERBAND
Contacts
Pin Diameter - .125 [3.175]
Test Current - 50 Amperes‡
Material and Finish
Contact - Copper
Spring - Beryllium copper
Plating Code
A. 0.00508 [.000200] min.
silver on contact area, 0.00127
[.000050] min. on remainder,
all over 0.00127 [.000050] min.
nickel underplate
B. 0.00076 [.000030] min.
gold on contact area, gold flash
on remainder, all over 0.00127
[.000050] min. nickel under-
plate
Related Product Data
Application Tooling - Pages 56,
57
Technical Document - Page 58
Extraction Tool
Part No. 318813-1
(Instruction Sheet 408-4374)
.125 POWERBAND Pin Contact
.125 POWERBAND Socket Contact
1
For use in Metrimate Drawer Connectors listed in chart below and Two-Piece Sealed Circular Plastic Connectors (CPC), Series
5 and 6.
‡ Single contact, free-air test current; not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information, page 3.
Note: Standard Size 8, High Current Upgrade Size 8, and .125 POWERBAND contacts are not intermateable.
* A typical 626 Pneumatic Tool System requires: a power unit (Part No. 189721-2, hand actuated or 189722-2, foot actuated),
an adapter holder (Part No. 356304-1, with ratchet), and “C” Head adapter Part No. 318161-1.
.125 POWERBAND Metrimate Drawer Connectors
No. of
Housing Part No.
Pos.
Plug Receptacle
8 213886-1** 213500-3**
Color: blue
** For use with .125 POWERBAND contacts (Extended Pin
Length), listed above.
10.16
[.400]
Standard
Extended1
12.32
[.485]
5.23
[.206]
Dia.
Contact
Strip
Serrations
Contact Part No.
Tooling Part No.
Heavy Duty Miniature (HDM) Die Sets for
Wire Size
Contact Pin
Strip Loose Piece Applicators (for AMP-O-LECTRIC Hand Tool 69710-1
AWG/mm
2
Finish Length
Pin Socket Pin Socket
Model G Machine, or 626 Pneumatic Tool
Base Part No. 354500) System*
A Standard 213845-1 213847-1 213845-3 213847-3
14-12
B Standard 213845-2 213847-2 213845-4 213847-4
680195-3 356612-1
2-3
A Extended
1
213845-5 — 213845-7 —
B Extended
1
213845-6 — 213845-8 —
A Standard 213841-1 213843-1 213841-3 213843-3
10-8
B Standard 213841-2 213843-2 213841-4 213843-4
356611-1 (8 AWG)
5-8
A Extended
1
213841-5 — 213841-7 —
680197-3
356611-2 (10 AWG)
B Extended
1
213841-6 — 213841-8 —
Power Contacts (Continued)
3.18
[.125]
Dia.
5.23
[.206]
Dia.
Contacts