Manualshelf

User manual

ManualsBrandsTE CONNECTIVITY ManualsD-SUB ConnectorsD-SUB housing Number of pins: 50 Polypropylene (PP) 90 °, 180 ° Black AMPLIMITE HD-20 (HDP-20) 1 pc(s)
12
Instruction Sheet
Cable Clamp Assemblies
for AMPLIMITE*
408--7555
LOC B
1 of 2
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TE Connectivity , TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
TOOLI NG ASSISTANCE CENT ER 1- - 800- -722- -1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
08 APR 11 Rev CHD- 20 a nd HD- 22 Connectors
Slot
Strain-- Relief
Channel
Gate Slot
Shim
Cable
Channel
Clamp
Strain-- Relief
Gate in 45
Outlet Position
Strain-- Relief Gate in
180 Outlet Position
Straight/90 Two --Piece
Connector Position
Gate
Screw
Side
Screw
Gate
Cable
Clamp
Slot
Curved Gate (For
Jacketed Cable)
Blank Gate (For
Discrete Wire)
Strain-- Relief
Section
Connector (Ref)
Internal Cable
Tie Openings
Cable in
90 Position
External Cable
Tie Openings
Connector (Ref)
Cable Tie
Cable in Straight
Position
Cable
Tie
4--40
Mounting
Screw(s)
Strai ght/90 One--Piece
Connector Position
Strai ght/45 One--Piece
Connector Position
SHELL
S
I
Z
E
CONNECTOR
POSITIONS
CLAMP
A
S
S
Y
{
SHELL
S
I
Z
E
CONNECTOR
POSITIONS
CLAMP
A
S
S
Y
{
SHELL
S
I
Z
E
CONNECTOR
POSITIONS
CLAMP
A
S
S
Y
}
S
I
Z
E
HD--20 HD--22
A
S
S
Y
{
S
I
Z
E
HD--20 HD--22
A
S
S
Y
{
S
I
Z
E
HD--20 HD--22
A
S
S
Y
}
1 9 15 5205729 1 9 15 207467 2 15 26 5206471
2 15 26 5205730 2 15 26 207470
3
2
5
4
4
5206472
3 25 44 5205718 3 25 44 207345
3 25 44
5
2
0
6
4
7
2
5745134
4 37 62 5205731 4 37 62 207473 4 37 62 5745081
5 50 78 5205732 5 50 78 207476 5 50 78 5745082
{Recommended only for HDP Connectors. }Recommended for HDE or HDP Connectors.
Figure 1
1. INTRODUCTION
This instruction sheet covers the installation of cable
clamp assemblies for AMPLIMITE HD--20, HD--22,
HDP, and HDE connectors. See Figure 1. Read this
instruction sheet thoroughly before attempting to
install the cable clamp assemblies.
Figures and illustrations are for reference only
and are not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 4, REVISION SUMMARY.
2. DESCRIPTION
There are three types of cable clamp assemblies
covered in this instruction sheet:
--- S t r a i g h t / 4 5 o n e --- p i e c e
--- S t r a i g h t / 9 0 o n e --- p i e c e
--- S t r a i g h t / 9 0 t w o --- p i e c e
The clamp assemblies are held together by screws
supplied in the kit. The cable clamp assemblies can
be used on either plug or receptacle connectors.
NOTE
i

Summary of content (2 pages)