Datasheet

2
03-2014, Rev. 0314
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Power Relay F4 (Continued)
Automotive Relays
Plug-in Mini ISO Relays
Max. load DC breaking capacity
Load limit curve 1: arc extinguishes during transit time (CO contact).
Load limit curve 2: safe shutdown, no stationary arc (NO contact).
Load limit curves measured with low inductive resistors verified for 1000 switching events.
Coil Data
Rated coil voltage 12/24VDC
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance
6)
power
6)
VDC VDC VDC Ω±10% W
052 12 7.2 1.6 90 1.6
053 24 14.4 3.2 324 1.8
056 24 16 4 268 2.1
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coil operating range
Does not take into account
the temperature rise due to
the contact current
E = pre-energization
TE0701-J1
Does not take into account the temperature rise due to the contact current E=pre-
energization..
6) Without components in parallel.
Insulation Data
Initial dielectric strength
between open contacts 500V
rms
between contact and coil 500V
rms
between adjacent contacts 500V
rms
Load dump test
ISO 7637-1 (12VDC), test pulse 5 Vs=+86.5VDC
ISO 7637-2 (24VDC), test pulse 5 Vs=+200VDC
Other Data
EU RoHS/ELV compliance compliant
Ambient temperature DC coil -40 to +125°C
Protection to heat and fire UL94-HB or better
7)
Climatic cycling with condensation
EN ISO 6988 6 cycles, storage 8/16h
Temperature cycling
IEC 60068-2-14, Nb 10 cycles, -40/+85°C (5°C/min)
Damp heat cyclic
IEC 60068-2-30, Db, Variant 1 6 cycles, upper air temp. 55°C
Damp heat constant
IEC 60068-2-3, Ca 56 days
Category of environmental protection,
IEC 61810 RTI – dustproof, RT III – sealed
Degree of protection, IEC 60529 IP54 (dustproof), IP67 (sealed)
Corrosive gas
IEC 60068-2-42 10±2cm
3
/m
3
SO
2
, 10 days
IEC 60068-2-43 1±0.3cm
3
/m
3
H
2
S, 10 days
Vibration resistance (functional)
IEC 60068-2-6 (sine sweep) 10 to 500Hz > 5g
8)
Shock resistance (functional)
IEC 60068-2-27 (half sine) 11ms >20g
8)
Drop test, free fall
IEC 60068-2-32 1m onto concrete
Terminal type plug-in, QC/PCB
Cover retention
axial force 150N
pull force 150N
push force 150N
Terminal retention
pull force 100N
push force 100N
resistance to bending, force applied to front
9)
10N
resistance to bending, force applied to side
9)
10N
torque 0.3Nm
Weight approx. 35g (1.2oz)
Packaging unit
plug-in/PCB 315 pcs.
plug-in with bracket 200 pcs.
7) Refers to used materials.
8) No change in the switching state >10μs. Valid for NC contacts, NO contact values
significantly higher.
9) Values apply 2mm from the end of the terminal. When the force is removed, the terminal
must not have moved by more than 0.3mm.
Accessories
For details see datasheet Connectors for Mini ISO Relays